scholarly journals Wind Potential determination in a known area

2008 ◽  
Author(s):  
O. Capatina ◽  
T. Grosan ◽  
R. Trimbitas
Keyword(s):  
Wind Potential

scholarly journals Offshore Wind Energy Resource Assessment across the Territory of Oman: A Spatial-Temporal Data Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2862
Author(s):  
Amer Al-Hinai ◽  
Yassine Charabi ◽  
Seyed H. Aghay Kaboli
Keyword(s):  
Data Analysis ◽  
Wind Energy ◽  
Wind Turbines ◽  
Energy Resource ◽  
Wind Farms ◽  
Offshore Wind ◽  
Wind Data ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Wind Potential

Despite the long shoreline of Oman, the wind energy industry is still confined to onshore due to the lack of knowledge about offshore wind potential. A spatial-temporal wind data analysis is performed in this research to find the locations in Oman’s territorial seas with the highest potential for offshore wind energy. Thus, wind data are statistically analyzed for assessing wind characteristics. Statistical analysis of wind data include the wind power density, and Weibull scale and shape factors. In addition, there is an estimation of the possible energy production and capacity factor by three commercial offshore wind turbines suitable for 80 up to a 110 m hub height. The findings show that offshore wind turbines can produce at least 1.34 times more energy than land-based and nearshore wind turbines. Additionally, offshore wind turbines generate more power in the Omani peak electricity demand during the summer. Thus, offshore wind turbines have great advantages over land-based wind turbines in Oman. Overall, this work provides guidance on the deployment and production of offshore wind energy in Oman. A thorough study using bankable wind data along with various logistical considerations would still be required to turn offshore wind potential into real wind farms in Oman.

scholarly journals Effect of Wind Turbine Classes on the Electricity Production of Wind Farms in Cyprus Island

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Yiannis A. Katsigiannis ◽  
George S. Stavrakakis ◽  
Christodoulos Pharconides
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Wind Farms ◽  
Electricity Production ◽  
Wind Speeds ◽  
Wind Potential

This paper examines the effect of different wind turbine classes on the electricity production of wind farms in two areas of Cyprus Island, which present low and medium wind potentials: Xylofagou and Limassol. Wind turbine classes determine the suitability of installing a wind turbine in a particulate site. Wind turbine data from five different manufacturers have been used. For each manufacturer, two wind turbines with identical rated power (in the range of 1.5 MW–3 MW) and different wind turbine classes (IEC II and IEC III) are compared. The results show the superiority of wind turbines that are designed for lower wind speeds (IEC III class) in both locations, in terms of energy production. This improvement is higher for the location with the lower wind potential and starts from 7%, while it can reach more than 50%.

Evaluation of wind potential and its trends in the mid-Atlantic

2017 ◽  
Vol 3 (4) ◽  
pp. 1199-1213 ◽  
Author(s):  
Adekunle Ayodotun Osinowo ◽  
Emmanuel Chilekwu Okogbue ◽  
Emmanuel Olaoluwa Eresanya ◽  
Olumide Samuel Akande
Keyword(s):  
Wind Potential

scholarly journals Using the SWEPT Methodology for a Preliminary Wind Potential Estimation

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Jean-Luc Menet
Keyword(s):  
Wind Turbine ◽  
Characteristic Curve ◽  
Rayleigh Distribution ◽  
Mean Velocity ◽  
Technical Data ◽  
Wind Potential ◽  
Order Of Magnitude ◽  
General Data ◽  
The Mean ◽  
A Site

The implantation of wind turbines generally follows a wind potential study which is made using specific numerical tools; the generated expenses are only acceptable for great projects. The purpose of the present paper is to propose a simplified methodology for the evaluation of the wind potential, following three successive steps for the determination of (i) the mean velocity, either directly or by the use of the most occurrence velocity (MOV); (ii) the velocity distribution coming from the single knowledge of the mean velocity by the use of a Rayleigh distribution and a Davenport-Harris law; (iii) an appropriate approximation of the characteristic curve of the turbine, coming from only two technical data. These last two steps allow calculating directly the electric delivered energy for the considered wind turbine. This methodology, called the SWEPT approach, can be easily implemented in a single worksheet. The results returned by the SWEPT tool are of the same order of magnitude than those given by the classical commercial tools. Moreover, everybody, even a “neophyte,” can use this methodology to obtain a first estimation of the wind potential of a site considering a given wind turbine, on the basis of very few general data.

Wind Turbine Aerodynamic Braking System Analysis Using Chord Wise Spacing

2015 ◽  
Vol 787 ◽  
pp. 217-221 ◽  
Author(s):  
B. Navin Kumar ◽  
K.M. Parammasivam
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Turbine Blade ◽  
Wind Turbines ◽  
Renewable Energy Sources ◽  
Energy Resource ◽  
Braking System ◽  
Extreme Wind ◽  
Wind Potential

Wind energy is one of the most significant renewable energy sources in the world. It is the only promising renewable energy resource that only can satisfy the nation’s energy requirements over the growing demand for electricity. Wind turbines have been installed all over the wind potential areas to generate electricity. The wind turbines are designed to operate at a rated wind velocity. When the wind turbines are exposed to extreme wind velocities such as storm or hurricane, the wind turbine rotates at a higher speed that affects the structural stability of the entire system and may topple the system. Mechanical braking systems and Aerodynamic braking systems have been currently used to control the over speeding of the wind turbine at extreme wind velocity. As a novel approach, it is attempted to control the over speeding of the wind turbine by aerodynamic braking system by providing the chord wise spacing (opening). The turbine blade with chord wise spacing alters the pressure distribution over the turbine blade that brings down the rotational speed of the wind turbine within the allowable limit. In this approach, the over speeding of the wind turbine blades are effectively controlled without affecting the power production. In this paper the different parameters of the chord wise spacing such as position of the spacing, shape of the spacing, width of the spacing and impact on power generation are analyzed and the spacing parameters are experimentally optimized.

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

scholarly journals Wind Data Analysis and Wind Flow Simulation Over Large Areas

2014 ◽  
Vol 10 (1) ◽  
pp. 38-45
Author(s):  
Angel Terziev ◽  
Ivan Antonov ◽  
Rositsa Velichkova
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Wind Flow ◽  
Energy Potential ◽  
Wind Potential ◽  
Wind Energy Potential ◽  
The Impact

Abstract Increasing the share of renewable energy sources is one of the core policies of the European Union. This is because of the fact that this energy is essential in reducing the greenhouse gas emissions and securing energy supplies. Currently, the share of wind energy from all renewable energy sources is relatively low. The choice of location for a certain wind farm installation strongly depends on the wind potential. Therefore the accurate assessment of wind potential is extremely important. In the present paper an analysis is made on the impact of significant possible parameters on the determination of wind energy potential for relatively large areas. In the analysis the type of measurements (short- and long-term on-site measurements), the type of instrumentation and the terrain roughness factor are considered. The study on the impact of turbulence on the wind flow distribution over complex terrain is presented, and it is based on the real on-site data collected by the meteorological tall towers installed in the northern part of Bulgaria. By means of CFD based software a wind map is developed for relatively large areas. Different turbulent models in numerical calculations were tested and recommendations for the usage of the specific models in flows modeling over complex terrains are presented. The role of each parameter in wind map development is made. Different approaches for determination of wind energy potential based on the preliminary developed wind map are presented.

scholarly journals ESTUDO DA PRODUÇÃO DE ENERGIA EÓLICA A PARTIR DE MEDIÇÕES ANEMOMÉTRICAS DA ESTAÇÃO DE CRAÍBAS/AL E SIMULAÇÕES COM O MODELO WASP

2016 ◽  
Vol 38 ◽  
pp. 477
Author(s):  
Thays Paes de Oliveira ◽  
Rosiberto Salustiano da Silva Junior ◽  
Roberto Fernando Fonseca Lyra ◽  
Sandro Correia Holanda
Keyword(s):  
Power Generation ◽  
Probability Distribution ◽  
Wind Turbine ◽  
Wind Direction ◽  
Wind Farm ◽  
Scale Parameters ◽  
Wind Potential ◽  
Generation Capacity ◽  
Intensity Density ◽  
Different Levels

Wind energy is seen as one of the promising generation of electricity, as a source of cheap and renewable, is benefit to reduce the environmental impacts of the dam. Along with the hydroelectric networks, the energy produced by the wind will help to increase power generation capacity in the country. That from speed data and direction municipality Wind Craíbas in the corresponding period 2014 - 2015, estimated the wind potential of the region. The tool used in the treatment of the collected data was the Wasp, making simulations of three different levels of measurement, producing a fictitious wind farm with powerful wind turbine. With the model, WASP helps estimate the probability distribution of Weibull and scale parameters A and K. he predominant wind direction is southeast and the best wind power and intensity density levels took place in 70m and 100m high , with about 201 W / m² and 243 W / m² respectively. But when evalua ted the inclusion of fictitious wind farm, the best use happened at 100m tall with production around 73.039 GWh , which can be attributed this improvement to increased efficiency of the wind turbine used in the simulation.

Sign in / Sign up

Export Citation Format

Share Document