scholarly journals FPGA and ASIC square root designs for high performance and power efficiency

2013 ◽  
Author(s):  
Shashank Suresh ◽  
Spiridon F. Beldianu ◽  
Sotirios G. Ziavras
Keyword(s):  
Power Efficiency ◽  
High Performance ◽  
Square Root

scholarly journals High Performance Multistring Converter Topology for Three-Phase Grid Tied 200 kW Photovoltaic Generating System

2017 ◽  
Vol 1 (2) ◽  
Author(s):  
Mohammad Rustam M. L. ◽  
F. Danang Wijaya
Keyword(s):  
Power Efficiency ◽  
High Performance ◽  
Reactive Power ◽  
Simulation Method ◽  
Operating Conditions ◽  
Total System ◽  
Voltage Reference ◽  
Pv System ◽  
Three Phase ◽  
Converter Topology

Under various external conditions, grid connected PV system performance is strongly affected by the topology that is used to connect a PV system with grid. This research aims to design a multistring based converter topology for three-phase grid connected 200 kW PV system that has a high performance in various operating conditions. Research was done by a simulation method using Matlab-Simulink with performance being evaluated including the generated power, efficiency, power quality in accordance with grid requirements, as well as the power flow. In the simulation, multistring converter topology was designed using two dc-dc boost multistring converters connected in parallel to a centralized of three-phase three-level NPC inverter with the size of the string being shorter and more parallel strings as well as the maximum voltage of the PV array of 273.5 V close to dc voltage reference of 500 V. Each dc-dc boost multistring converter have individual MPPT controllers. The simulation results showed that this multistring converter topology had a high performance in various operating conditions. This due to more power generated by the NPC inverter (> 190 kW) at the time of high power generation on the STC conditions (1000 W/m2, 25 oC), the lowest efficiency of the total system is 95.08 % and the highest efficiency of the total system is 99.4 %, the quality of the power generated in accordance with the requirements of grid, as well as the inverter put more active power to the grid and less reactive power to the grid. The response of the inverter slightly worse for loads with greater reactive power and unbalanced.

Rack Server Solution in Data Center

2015 ◽  
Author(s):  
Sheng Kang ◽  
Guofeng Chen ◽  
Chun Wang ◽  
Ruiquan Ding ◽  
Jiajun Zhang ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Supply ◽  
Data Center ◽  
Power Efficiency ◽  
High Performance ◽  
High Efficiency ◽  
High Growth ◽  
General Purpose ◽  
Power Supplies

With the advent of big data and cloud computing solutions, enterprise demand for servers is increasing. There is especially high growth for Intel based x86 server platforms. Today’s datacenters are in constant pursuit of high performance/high availability computing solutions coupled with low power consumption and low heat generation and the ability to manage all of this through advanced telemetry data gathering. This paper showcases one such solution of an updated rack and server architecture that promises such improvements. The ability to manage server and data center power consumption and cooling more completely is critical in effectively managing datacenter costs and reducing the PUE in the data center. Traditional Intel based 1U and 2U form factor servers have existed in the data center for decades. These general purpose x86 server designs by the major OEM’s are, for all practical purposes, very similar in their power consumption and thermal output. Power supplies and thermal designs for server in the past have not been optimized for high efficiency. In addition, IT managers need to know more information about servers in order to optimize data center cooling and power use, an improved server/rack design needs to be built to take advantage of more efficient power supplies or PDU’s and more efficient means of cooling server compute resources than from traditional internal server fans. This is the constant pursuit of corporations looking at new ways to improving efficiency and gaining a competitive advantage. A new way to optimize power consumption and improve cooling is a complete redesign of the traditional server rack. Extracting internal server power supplies and server fans and centralizing these within the rack aims to achieve this goal. This type of design achieves an entirely new low power target by utilizing centralized, high efficiency PDU’s that power all servers within the rack. Cooling is improved by also utilizing large efficient rack based fans for airflow to all servers. Also, opening up the server design is to allow greater airflow across server components for improved cooling. This centralized power supply breaks through the traditional server power limits. Rack based PDU’s can adjust the power efficiency to a more optimum point. Combine this with the use of online + offline modes within one single power supply. Cold backup makes data center power to achieve optimal power efficiency. In addition, unifying the mechanical structure and thermal definitions within the rack solution for server cooling and PSU information allows IT to collect all server power and thermal information centrally for improved ease in analyzing and processing.

Resource Allocation for a Cooperative Broadband MIMO-OFDM System

2010 ◽  
pp. 382-398
Author(s):  
Ibrahim Y. Abualhaol ◽  
Mustafa M. Matalgah
Keyword(s):  
Resource Allocation ◽  
Power Distribution ◽  
Power Efficiency ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Ofdm System ◽  
Frequency Space ◽  
Input Multiple Output ◽  
Power Loading ◽  
Mimo Ofdm

In this chapter, a cooperative broadband relay-based resource allocation technique is proposed for adaptive bit and power loading multiple-input-multiple-output/orthogonal frequency division multiplexing (MIMO-OFDM) system. In this technique, sub-channels allocation, M-QAM modulation order, and power distribution among different sub-channels in the relay-based MIMO-OFDM system are jointly optimized according to the channel state information (CSI) of the relay and the direct link. The transmitted stream of bits is divided into two parts according to a suggested cooperative protocol that is based on sub-channel-division. In this protocol, the first part is sent directly from the source to the destination, and the second part is relayed to the destination through an indirect link. Such a cooperative relay-based system enables us to exploit the inherent system diversities in frequency, space and time to maximize the system power efficiency. The BER performance using this cooperative sub-channel-division protocol with adaptive sub-channel assignment and adaptive bit/power loading are presented and compared with a noncooperative ones. The use of cooperation in a broadband relay-based MIMO-OFDM system showed high performance improvement in terms of BER.

scholarly journals Transformerless Quasi-Z-Source Inverter to Reduce Leakage Current for Single-Phase Grid-Tied Applications

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 312 ◽  
Author(s):  
Woo-Young Choi ◽  
Min-Kwon Yang
Keyword(s):  
Leakage Current ◽  
Power Efficiency ◽  
High Performance ◽  
Single Phase ◽  
Power Devices ◽  
Common Mode Voltage ◽  
Control Scheme ◽  
Frequency Components ◽  
The Common ◽  
Current Reduction

The conventional single-phase quasi-Z-source (QZS) inverter has a high leakage current as it is connected to the grid. To address this problem, this paper proposes a transformerless QZS inverter, which can reduce the leakage current for single-phase grid-tied applications. The proposed inverter effectively alleviates the leakage current problem by removing high-frequency components for the common-mode voltage. The operation principle of the proposed inverter is described together with its control strategy. A control scheme is presented for regulating the DC-link voltage and the grid current. A 1.0 kW prototype inverter was designed and tested to verify the performance of the proposed inverter. Silicon carbide (SiC) power devices were applied to the proposed inverter to increase the power efficiency. The experimental results showed that the proposed inverter achieved high performance for leakage current reduction and power efficiency improvement.

High performance VLSI modules for division and square root

1998 ◽  
Vol 22 (5) ◽  
pp. 239-246 ◽  
Author(s):  
Gregorio Cappuccino ◽  
Pasquale Corsonello ◽  
Giuseppe Cocorullo
Keyword(s):  
High Performance ◽  
Square Root

Bio-Inspired Micro-Drills for Future Planetary Exploration

2006 ◽  
Author(s):  
C. Menon ◽  
J. F. V. Vincent ◽  
N. Lan ◽  
L. Bilhaut ◽  
A. Ellery ◽  
...  
Keyword(s):  
Power Efficiency ◽  
High Performance ◽  
Small Scale ◽  
Space Technology ◽  
Sirex Noctilio ◽  
Design Work ◽  
Space Applications ◽  
Space Operations ◽  
Micro Technology ◽  
The University

In a domain such as space technology, where robustness, mass, volume and power efficiency are key, biological organisms may provide inspiration for new systems with high performance. By using micro-technology processes, designers of space systems may take advantage of the millions of years over which miniaturised mechanisms in plants and animals have been optimised for survival. Space exploration often requires systems equipped with drills, and miniaturised drillers could enable a number of new space operations. Two natural digging systems have been studied as potential miniature space digging systems; the ovipositors of the female locust and of sirex noctilio, a species of woodwasp. Being insectoid systems, the mechanics of their design work on an inherently small scale, though they are also thought to be scalable. Results of preliminary studies, performed during collaboration between the Advanced Concepts Team of ESA, the University of Bath, the University of Surrey, D’appolonia and EADS-Astrium, are presented and discussed. Engineering solutions are proposed and analysed to assess the potential of new bio-inspired miniaturised digging systems for space applications.

Sign in / Sign up

Export Citation Format

Share Document