Trajectory planning, optimization and control for industrial robots

Author(s):  
J. Olomski
2010 ◽  
Vol 30 (2) ◽  
pp. 236-258 ◽  
Author(s):  
Mrinal Kalakrishnan ◽  
Jonas Buchli ◽  
Peter Pastor ◽  
Michael Mistry ◽  
Stefan Schaal

We present a control architecture for fast quadruped locomotion over rough terrain. We approach the problem by decomposing it into many sub-systems, in which we apply state-of-the-art learning, planning, optimization, and control techniques to achieve robust, fast locomotion. Unique features of our control strategy include: (1) a system that learns optimal foothold choices from expert demonstration using terrain templates , (2) a body trajectory optimizer based on the Zero-Moment Point (ZMP) stability criterion, and (3) a floating-base inverse dynamics controller that, in conjunction with force control, allows for robust, compliant locomotion over unperceived obstacles. We evaluate the performance of our controller by testing it on the LittleDog quadruped robot, over a wide variety of rough terrains of varying difficulty levels. The terrain that the robot was tested on includes rocks, logs, steps, barriers, and gaps, with obstacle sizes up to the leg length of the robot. We demonstrate the generalization ability of this controller by presenting results from testing performed by an independent external test team on terrain that has never been shown to us.


2010 ◽  
Vol 443 ◽  
pp. 652-656
Author(s):  
Shah Md. Mahfuzur Rahman ◽  
Jong Leng Liow

The analysis of cutting forces plays an important role in the design of machine tool systems as well as in the planning, optimization, and control of micro machining processes. Several parameters influence the cutting forces of which the friction is important in causing premature tool failure. This paper presents a force model that includes the friction force for sliding due to the contact between the tool and workpiece at the flank face. Simulation results were compared with the experimental results of Bao and Tansel [1] showing that the model can satisfactorily represent the cutting forces in two dimensional cutting.


2021 ◽  
Author(s):  
Eliot S. Rudnick-Cohen ◽  
Joshua D. Hodson ◽  
Gregory W. Reich ◽  
Alexander M. Pankonien ◽  
Philip S. Beran

2018 ◽  
Vol 69 (10) ◽  
pp. 2633-2637
Author(s):  
Raluca Dragomir ◽  
Paul Rosca ◽  
Cristina Popa

The main objectives of the present paper are to adaptation the five-kinetic model of the catalytic cracking process and simulation the riser to predicts the FCC products yields when one of the major input variable of the process is change. The simulation and adaptation are based on the industrial data from Romanian refinery. The adaptation is realize using a computational method from Optimization Toolbox from Matlab programming language. The new model can be used for optimization and control of FCC riser.


1989 ◽  
Vol 24 (3) ◽  
pp. 463-477
Author(s):  
Stephen G. Nutt

Abstract Based on discussions in workshop sessions, several recurring themes became evident with respect to the optimization and control of petroleum refinery wastewater treatment systems to achieve effective removal of toxic contaminants. It was apparent that statistical process control (SPC) techniques are finding more widespread use and have been found to be effective. However, the implementation of real-time process control strategies in petroleum refinery wastewater treatment systems is in its infancy. Considerable effort will need to be expended to demonstrate the practicality of on-line sensors, and the utility of automated process control in petroleum refinery wastewater treatment systems. This paper provides a summary of the discussions held at the workshop.


Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 400 ◽  
Author(s):  
Zelin Nie ◽  
Feng Gao ◽  
Chao-Bo Yan

Reducing the energy consumption of the heating, ventilation, and air conditioning (HVAC) systems while ensuring users’ comfort is of both academic and practical significance. However, the-state-of-the-art of the optimization model of the HVAC system is that either the thermal dynamic model is simplified as a linear model, or the optimization model of the HVAC system is single-timescale, which leads to heavy computation burden. To balance the practicality and the overhead of computation, in this paper, a multi-timescale bilinear model of HVAC systems is proposed. To guarantee the consistency of models in different timescales, the fast timescale model is built first with a bilinear form, and then the slow timescale model is induced from the fast one, specifically, with a bilinear-like form. After a simplified replacement made for the bilinear-like part, this problem can be solved by a convexification method. Extensive numerical experiments have been conducted to validate the effectiveness of this model.


Sign in / Sign up

Export Citation Format

Share Document