Numerical simulation on the noise suppression effect of nanogranular magnetic film CoFeHfO on PCB transmission lines

Author(s):  
Baomin Wang ◽  
Liangliang Li
2012 ◽  
Vol 614-615 ◽  
pp. 1855-1861
Author(s):  
Yu Xian Di ◽  
Kuan Jun Zhu ◽  
Cao Lan Liu

Based on the summarization of domestic and foreign experience, the computational method of spacer configuration was developed in order to depress sub-span oscillation principally. The requirements of the reverse recovery characteristics were considered. The computer-aided calculation procedures were programmed. The finite element analysis model of sub-span oscillation for cable-spacer system was established. The inherence modal and amplitude for sub-span oscillation of bundled transmission lines were calculated by using numerical simulation method. The dynamic configurations were analyzed by using the parameters of the cable and spacer obtained from vibration testing.


2021 ◽  
Vol 11 (18) ◽  
pp. 8622
Author(s):  
Xiaofei Du ◽  
Qidi Fu ◽  
Jianrun Zhang ◽  
Chaoyong Zong

The acoustic black hole (ABH) structures have the potential to achieve structural vibration suppression and noise reduction through the effect of the ABH on the concentration and manipulation of flexural waves. In this paper, a new solution is proposed to embed 2-D ABHs on the support plate to suppress the transmission of compressor vibration to the refrigerator body. The vibration and acoustic measurement experiment of the compressor, the support plate and the refrigerator body, and the coherence analysis of the vibration signals and acoustic signal are carried out to determine the influence of the compressor vibration on the vibration of the refrigerator body and the radiation sound of the back wall. The concentration and manipulation effects of 2-D ABH on flexural waves are verified by numerical simulation of flexural wave propagation in the time domain. FEM models of the original support plate and the damping ABH support plate are established to investigate the comprehensive effect of the 2-D ABHs and the damping layers on the vibration characteristics of the support plate through vibration modal and dynamic response analysis. Numerical simulation results show that the 2-D damping ABHs can suppress the vibrations generated by the compressor at specific frequencies in the middle and high-frequency bands from being transmitted to the refrigerator body through the support plate.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Zhuo Yan ◽  
Shengli Guo ◽  
Shujie Yuan ◽  
Chaomin Mu

In this article, the effect of a chamber’s geometrical parameters on suppressing gas explosion propagation was studied. Three rectangular chambers were used in the study, with a constant length of 0.5 m, a constant height of 0.2 m, and a variable width of 0.3 m, 0.5 m, and 0.8 m; each chamber was installed in a pipeline system for experimental research. The experimental results showed that when the chamber length and height were fixed at 0.5 m and 0.2 m, respectively, the suppression effect of the chamber on the explosion shockwave improves with the increase in the chamber width; when the chamber width increases to 0.8 m, the chamber has suppressive effect on explosion shockwave propagation. It was also found that the suppression effect of the chambers on the explosion flame improves with the increase in the chamber width; when the width of the chamber is 0.5 m, the chamber effectively suppresses explosion flames. Based on the experimental results, a numerical model was established to simulate the suppression effect of five types of chambers with a length, width, and height of 0.5 m × 0.3 m × 0.2 m, 0.3 m × 0.5 m × 0.2 m, 0.5 m × 0.5 m × 0.2 m, 0.5 m × 0.8 m × 0.2 m, and 0.8 m × 0.5 m × 0.2 m, respectively. The numerical simulation results indicated that when the chamber length and height are constant at 0.5 m and 0.2 m, respectively, the suppressive effect of the chamber on the shockwave improves as the chamber width increases; when the chamber width increases to 0.8 m, the shockwave overpressure at the chamber outlet is attenuated by 10.61%, indicating that the chamber suppresses the propagation of explosion shockwave, which is consistent with the experimental results obtained in the study. It was also found that when the chamber width and height were constant at 0.5 m and 0.2 m, respectively, as the chamber length increases, the overpressure increases first and then weakens. When the chamber length increases to 0.8 m, the overpressure at the chamber outlet is attenuated by −14.16%, indicating that the chamber is not able to suppress the propagation of explosion shockwave. Finally, a numerical simulation of the propagation process of a methane-air mixture and explosion flames in different chambers was performed to analyse the effect of chamber geometrical parameters on explosion suppression effect.


2019 ◽  
Vol 59 ◽  
pp. 507-524 ◽  
Author(s):  
Mehmet Emir Koksal ◽  
Mehmet Senol ◽  
Ali Kemal Unver

2014 ◽  
Vol 8 (1) ◽  
pp. 84-89 ◽  
Author(s):  
Liu Yuejun ◽  
Tang Ai P. ◽  
Liu Ke T. ◽  
Tu Jie W.

Despite the fact that the wind tunnel tests have been carried out on iced transmission lines subjected to wind load, it is not practical to do wind tunnel tests due to its high cost. This paper describes a detailed numerical simulation method that can be used to instead of wind tunnel tests. Based on the galloping mechanism of iced transmission lines, the aerodynamic test was simulated with the typical crescent super-large thickness iced four bundled conductors. One of the results highlighted in this study is that the wind angle of attack had significant influence on the aerodynamics of iced conductors. The Den-Hartog and O.Nigol coefficient were calculated to determine galloping of iced transmission lines, comparing with the reference of wind tunnel test in the Zhejiang university, the range of the wind angle of attack to the bundled conductor which can lead to gallop is larger than single wire, but the absolute value of amplitude is less than the single conductor, split conductor is more likely to gallop than single conductor.


Sign in / Sign up

Export Citation Format

Share Document