An Enhanced Reference Structure For Reference Picture Resampling (RPR) In VVC

2021 ◽  
Author(s):  
Tianliang Fu ◽  
Kai Zhang ◽  
Li Zhang ◽  
Shanshe Wang ◽  
Siwei Ma
Keyword(s):  
Reference Structure

High-Resolution Resistance Mapping in SEM

2018 ◽  
Author(s):  
Grigore Moldovan ◽  
Wolfgang Joachimi ◽  
Guillaume Boetsch ◽  
Jörg Jatzkowski ◽  
Frank Altman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Reference Structure ◽  
Total Resistance ◽  
Embedded Electronics ◽  
Improved Performance ◽  
Mapping Techniques ◽  
Scanning Electron

Abstract This work presents advanced resistance mapping techniques based on Scanning Electron Microscopy (SEM) with nanoprobing systems and the related embedded electronics. Focus is placed on recent advances to reduce noise and increase speed, such as integration of dedicated in situ electronics into the nanoprobing platform, as well as an important transition from current-sensitive to voltagesensitive amplification. We show that it is now possible to record resistance maps with a resistance sensitivity in the 10W range, even when the total resistance of the mapped structures is in the range of 100W. A reference structure is used to illustrate the improved performance, and a lowresistance failure case is presented as an example of analysis made possible by these developments.

scholarly journals Elastic deformation of the mandibular jaw revisited—a clinical comparison between digital and conventional impressions using a reference

2021 ◽  
Author(s):  
Alexander Schmidt ◽  
Leona Klussmann ◽  
Maximiliane A. Schlenz ◽  
Bernd Wöstmann
Keyword(s):  
Statistical Analysis ◽  
Elastic Deformation ◽  
Clinical Relevance ◽  
Mouth Opening ◽  
Reference Structure ◽  
Intraoral Scanner ◽  
Digital Impressions ◽  
Normal Vectors ◽  
Mandibular Deformation ◽  
Conventional Impression

Abstract Objectives Due to the partly strongly differing results in the literature, the aim of the present study was to investigate a possible deformation of the mandible during mouth opening using an intraoral scanner (IOS) and a conventional impression for comparison with a reference aid. Materials and methods Four steel spheres were reversibly luted in the mandibular (n = 50) with a metallic reference aid at maximum mouth opening (MMO). Two digital impressions (Trios3), at MMO and at slightly mouth opening SMO and a conventional impression (Impregum), were taken as the measuring accuracy of the reference structure was already known. Difference between MMO-SMO for digital impressions and deviations between digital and conventional (SMO) were calculated. Furthermore, the angle between the normal vectors of two constructed planes was measured. Statistical analysis was performed with SPSS25. Results Deviations for linear distances ranged from −1 ± 3 μm up to 17 ± 78 μm (digital impressions, MMO-SMO), from 19 ± 16 μm up to 132 ± 90 μm (digital impressions, SMO), and from 28 ± 17 μm up to 60 ± 52 μm (conventional impressions, SMO). There were no significant differences for digital impressions (MMO-SMO), and there were significant differences between the conventional and digital impressions at SMO. Conclusions Based on the results of the present study, no mandibular deformation could be detected during mouth opening with regard to the digital impressions. The results were rather within the measuring tolerance of the intraoral scanner. Clinical relevance Based on the present study, no deformation of the mandibular during mouth opening could be observed at the level previously assumed. Therewith related, dental techniques related to a possible mandibular deformation therefore should be reconsidered.

scholarly journals On the dynamics of some small structural motifs in rRNA upon ligand binding

2008 ◽  
Vol 73 (1) ◽  
pp. 41-53
Author(s):  
Aleksandra Rakic ◽  
Petar Mitrasinovic
Keyword(s):  
Molecular Dynamics ◽  
Conformational Changes ◽  
Binding Sites ◽  
De Novo ◽  
Reference Structure ◽  
Base Pairs ◽  
Rna Sequences ◽  
Conformational Model ◽  
Thermodynamic Variables ◽  
Dynamics Simulations

The present study characterizes using molecular dynamics simulations the behavior of the GAA (1186-1188) hairpin triloops with their closing c-g base pairs in large ribonucleoligand complexes (PDB IDs: 1njn, 1nwy, 1jzx). The relative energies of the motifs in the complexes with respect to that in the reference structure (unbound form of rRNA; PDB ID: 1njp) display the trends that agree with those of the conformational parameters reported in a previous study1 utilizing the de novo pseudotorsional (?,?) approach. The RNA regions around the actual RNA-ligand contacts, which experience the most substantial conformational changes upon formation of the complexes were identified. The thermodynamic parameters, based on a two-state conformational model of RNA sequences containing 15, 21 and 27 nucleotides in the immediate vicinity of the particular binding sites, were evaluated. From a more structural standpoint, the strain of a triloop, being far from the specific contacts and interacting primarily with other parts of the ribosome, was established as a structural feature which conforms to the trend of the average values of the thermodynamic variables corresponding to the three motifs defined by the 15-, 21- and 27-nucleotide sequences. From a more functional standpoint, RNA-ligand recognition is suggested to be presumably dictated by the types of ligands in the complexes.

scholarly journals Comparison of Cervical Vertebral Body Volume in Class II Vertical and Class II Horizontal Cases With Class I Cases Using 3D-DVT

2020 ◽  
Vol 54 (4) ◽  
pp. 332-337
Author(s):  
Hamza Saifuddin Dargahwala ◽  
Pallavi Daigavane ◽  
Vausdevan SD ◽  
Ranjit Kamble ◽  
Sunita Shrivastav ◽  
...  
Keyword(s):  
Vertebral Body ◽  
Cervical Vertebrae ◽  
Class Ii ◽  
Growth Patterns ◽  
Class I ◽  
Body Volume ◽  
Reference Structure ◽  
Skeletal Class ◽  
Significant Difference ◽  
Cervical Vertebral Body

The branch of orthodontics has had an interest in the cervical vertebrae wherein cervical spine is used as a reference structure for natural head position, so skeletal age was evaluated by studying variations in the cervical vertebral morphologies. Among all evaluations, very limited data is available wherein comparison between cervical vertebral body volumes between the different malocclusions has been done. This study aimed to compare the differences in the volumes of cervical vertebral bodies of C2, C3, and C4 between skeletal class I and class II malocclusions of both horizontal and vertical growth patterns. In class I the volume was significantly lesser as compared to class II. It was seen that there was statistically no significant difference in the volume between the horizontal and vertical growers. It can be concluded from this study that cervical vertebral body volume has no effect on growth pattern. However, variations in cervical vertebral body volume are seen with different malocclusions.

scholarly journals Major sickle cell disease and pregnancy: about 24 cases observed in a reference structure in Senegal (National hospital of pikine)

2019 ◽  
Vol 8 (6) ◽  
pp. 315-318
Author(s):  
Moussa Diallo ◽  
Abdoul Aziz Diouf ◽  
Aminata Niass ◽  
Astou Coly Niassy Diallo ◽  
Babacar Biaye ◽  
...  
Keyword(s):  
Sickle Cell Disease ◽  
Sickle Cell ◽  
Reference Structure ◽  
Cell Disease ◽  
National Hospital

scholarly journals Evaluation of Terrestrial Laser Scanner Accuracy in the Control of Hydrotechnical Structures

2017 ◽  
Vol 39 (4) ◽  
pp. 45-57 ◽  
Author(s):  
Zbigniew Muszyński ◽  
Jarosław Rybak
Keyword(s):  
Laser Scanning ◽  
Reference Beam ◽  
Terrestrial Laser Scanning ◽  
Systematic Errors ◽  
Ground Movement ◽  
Engineering Practice ◽  
Reference Structure ◽  
Advantages And Disadvantages ◽  
Measurement Results ◽  
Horizontal Displacements

Abstract In many cases of monitoring or load testing of hydrotechnical structures, the measurement results obtained from dial gauges may be affected by random or systematic errors resulting from the instability of the reference beam. For example, the measurement of wall displacement or pile settlement may be increased (or decreased) by displacements of the reference beam due to ground movement. The application of surveying methods such as high-precision levelling, motorized tacheometry or even terrestrial laser scanning makes it possible to provide an independent reference measurement free from systematic errors. It is very important in the case of walls and piles embedded in the rivers, where the construction of reference structure is even more difficult than usually. Construction of an independent reference system is also complicated when horizontal testing of sheet piles or diaphragm walls are considered. In this case, any underestimation of the horizontal displacement of an anchored or strutted construction leads to an understated value of the strut’s load. These measurements are even more important during modernization works and repairs of the hydrotechnical structures. The purpose of this paper is to discuss the possibilities of using modern measurement methods for monitoring of horizontal displacements of an excavation wall. The methods under scrutiny (motorized tacheometry and terrestrial laser scanning) have been compared to classical techniques and described in the context of their practical use on the example hydrotechnical structure. This structure was a temporary cofferdam made from sheet pile wall. The research continuously conducted at Wroclaw University of Science and Technology made it possible to collect and summarize measurement results and practical experience. This paper identifies advantages and disadvantages of both analysed methods and presents a comparison of obtained measurement results of horizontal displacements. In conclusion, some recommendations have been formulated, which are relevant from the point of view of engineering practice.

scholarly journals Assessment of Energy Saving Potential by Replacing Conventional Materials by Cross Laminated Timber (CLT)—A Case Study of Office Buildings in China

2019 ◽  
Vol 9 (5) ◽  
pp. 858 ◽  
Author(s):  
Yu Dong ◽  
Xue Cui ◽  
Xunzhi Yin ◽  
Yang Chen ◽  
Haibo Guo
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Southern China ◽  
Computational Simulation ◽  
Northern China ◽  
Office Buildings ◽  
Reference Structure ◽  
Cross Laminated Timber ◽  
Climatic Regions ◽  
Heating And Cooling

This research evaluates the operational heating and cooling energy consumption of cross-laminated timber (CLT) office buildings in China. The evaluations involve a comparison of the energy consumption of a reference RC structure and CLT system office buildings. Computational simulation results are based on IES-VE 2019 and show that the estimated heating energy saving ratio of CLT buildings in Harbin, Beijing, Shanghai, and Kunming to the reference structure are 11.97%, 22.11%, 30.94%, and 23.30% respectively. However, the CLT buildings consume more energy for cooling in the summer. The results of the research show significantly higher heating energy reductions for CLT buildings in the Cold Region and Severe Cold Regions of China. Thus, the application of the CLT system is better suited to northern China than southern China. The results of the research can be used in further assessment of the use of CLT systems in different climatic regions in China.

Sign in / Sign up

Export Citation Format

Share Document