Control System optimization of Three-Phase Active Rectifier Based on Evolutionary Algorithm

2019 ◽  
Author(s):  
Muhammad Saqib Ali ◽  
Lei Wang ◽  
Guozhu Chen
Keyword(s):  
Control System ◽  
Evolutionary Algorithm ◽  
System Optimization ◽  
Active Rectifier ◽  
Three Phase

scholarly journals THE INFLUENCE OF THE INPUT INDUCTANCE ON THE QUALITATIVE INDICATORS OF ACTIVE CONTROLLED RECTIFIER

2021 ◽  
pp. 18-23
Author(s):  
Denis Krylov ◽  
Olga Kholod
Keyword(s):  
Control System ◽  
Electromagnetic Compatibility ◽  
Modulation Frequency ◽  
Frequency Converter ◽  
Voltage Source ◽  
Stable Operation ◽  
Active Rectifier ◽  
Semiconductor Converters ◽  
Three Phase

The main part of electricity is used by industrial plants in a converted form and the use of semiconductor converters is growing rapidly. The requirements for the quality of semiconductor converters are increased. And their impact on the power supply, load and related consumers is increased too. One of the most popular converters in the segment of low and medium power drives is a frequency converter made on the basis of a three-phase stand-alone voltage inverter. A significant disadvantage of such converters is the use of a diode rectifier at the input of the circuit, which has disadvantages as the inability to recover electricity to the mains in the mode of dynamic braking of an induction motor and significant distortions of the mains current. These disadvantages can be eliminated by using an active rectifier instead of a diode rectifier, which provides a sinusoidal shape of the mains current in phase with the mains voltage and the possibility of bidirectional energy exchange with the load. The efficiency of the active rectifier-voltage source is determined by the selected control algorithm of the circuit switches and the correct task of the inductance of the input choke. A mathematical model of a three-phase active rectifier-voltage source, working with a fixed modulation frequency with a vector algorithm for building a control system and analysis of the influence of the input inductance on the quality of its work was created. From the simulation results it became obvious that the proposed structure of the control system provides stable operation of the converter and acceptable standards for electromagnetic compatibility with the mains at a fixed modulation frequency; the proposed algorithm for calculating the value of the input inductances allows you to correctly select their allowable value, and obtained in the simulation of the dependence allows you to most accurately determine the value of the input inductances on the allowable level of distortion of mains current and supply voltage.

Direct Current Deadbeat Predictive Controller for BLDC Motor Using Single DC-Link Current Sensor

2020 ◽  
Vol 38 (8A) ◽  
pp. 1187-1199
Author(s):  
Qaed M. Ali ◽  
Mohammed M. Ezzalden
Keyword(s):  
Control System ◽  
High Speed ◽  
Fast Response ◽  
Bldc Motor ◽  
Current Controller ◽  
Three Phase ◽  
Predictive Controller ◽  
Two Phases ◽  
Dc Current ◽  
Three Phase Inverter

BLDC motors are characterized by electronic commutation, which is performed by using an electric three-phase inverter. The direct control system of the BLDC motor consists of double loops; including the inner-loop for current regulating and outer-loop for speed control. The operation of the current controller requires feedback of motor currents; the conventional current controller uses two current sensors on the ac side of the inverter to measure the currents of two phases, while the third current would be accordingly calculated. These two sensors should have the same characteristics, to achieve balanced current measurements. It should be noted that the sensitivity of these sensors changes with time. In the case of one sensor fails, both of them must be replaced. To overcome this problem, it is preferable to use one sensor instead of two. The proposed control system is based on a deadbeat predictive controller, which is used to regulate the DC current of the BLDC motor. Such a controller can be considered as digital controller mode, which has fast response, high precision and can be easily implemented with microprocessor. The proposed control system has been simulated using Matlab software, and the system is tested at a different operating condition such as low speed and high speed.

Temperature Control System for Transformer Three-Phase 50 Hz 2500 kVA

2017 ◽  
Vol 3 (2) ◽  
pp. 88
Author(s):  
Suci Rahmatia ◽  
Marsah Zaysi Makhudzia
Keyword(s):  
Optimal Control ◽  
Control System ◽  
Heat Loss ◽  
Temperature Control ◽  
Electrical Energy ◽  
Temperature Control System ◽  
Iron Core ◽  
Electrical Device ◽  
Optimal Control System ◽  
Three Phase

<p><em>Abstrak <strong>- </strong></em><strong>Transformator adalah peralatan listrik yang sangat vital dalam proses pembangkitan maupun transmisi energi listrik karena transformator dapat menaikkan atau menurunkan tegangan. Pada proses menaikkan dan menurunkan tegangan biasanya sering timbul panas akibat rugi – rugi tembaga pada inti besi dan kumparannya sehingga pada kondisi overload akan menimbulkan pemanasan yang berlebih dan dapat mempengaruhi kinerja transformator. Oleh karena itu dibuat sistem kontrol temperatur pada transformer yang dapat mengontrol temperatur di dalam transformator saat bekerja pada kondisi overload, sehigga transformatornya tidak terbakar. Dial thermometer digunakan sebagai alat yang mengontrol temperatur transformator pada sistem kontrol temperatur. Agar mendapatkan sistem kontrol yang optimal, maka setting temperatur pada dial thermometer di sesuaikan dengan temperatur maksimal tranformator dapat bekerja. Sehingga pada saat temperatur tertentu dial thermometer dapat memberikan sinyal untuk membunyikan alarm dan mengaktifkan kontrol kipas sehingga kipas dapat bekerja menurunkan temperatur transformator.<em></em></strong></p><p><strong><em> </em></strong></p><p><strong><em>Kata kunci - </em></strong><em>transformator, rugi – rugi tembaga, temperatur, sistem kontrol, dial thermometer<strong>.</strong></em></p><p><strong><em> </em></strong></p><p><em>Abstract <strong>- </strong></em><strong>A transformer is an electrical device that is vital in the generation and transmission of electrical energy because the transformer can raise (stepping up) or lower (stepping down) the voltage. In the process of raising and lowering the voltage is usually often caused heat loss of copper in iron core and coil so that the overload condition will cause excessive warming and can affect the performance of the transformer. Therefore, a temperature control system on the transformer can control the temperature inside the transformer while working under overload conditions, so the transformer is not burned. Dial thermometer is used as a device that controls the temperature of the transformer in the temperature control system. In order to obtain an optimal control system, the temperature setting on the dial thermometer adjusted to the maximum transformer temperature can work. So that when a certain temperature dial thermometer can provide a signal to sound the alarm and activate the fan control so that the fan can work down the transformer temperature.</strong></p><p><strong> </strong></p><p><strong><em>Keywords -  </em></strong><em>transformator, loss of copper, themperature, control system, dial thermometer<strong></strong></em></p>

Study of the Influence of Control System Parameters on the Quality of the Input Current of a Three-Phase Power Factor Corrector

2021 ◽  
Vol 2 (2) ◽  
pp. 29-35
Author(s):  
Dmitry A. Sorokin ◽  
◽  
Sergey I. Volskiy ◽  
Jaroslav Dragoun ◽  
◽  
...  
Keyword(s):  
Control System ◽  
Power Factor ◽  
Harmonic Distortion ◽  
Total Harmonic Distortion ◽  
Input Current ◽  
System Operation ◽  
Error Amplifier ◽  
Three Phase ◽  
Power Factor Corrector

The paper suggests a control system of a three-phase power factor corrector. The study of the control system operation is carried out and the expressions for calculating the permissible values of error amplifier factors are obtained. The influence of the error amplifier parameters on phase current quality is investigated. The dependence of total harmonic distortion input current on a combination of error amplifier parameters is obtained at a given value of power factor. The conditions under which the total harmonic distortion input current has the minimum value are found out. This article is of interest to power electronics engineers, who are aimed at developing a three-phase power factor corrector.

Studies on Implementations and Designs of DSP in the Six-Phase Induction Motor Vector Control System

2011 ◽  
Vol 268-270 ◽  
pp. 1681-1686
Author(s):  
Chao Yong Tuo
Keyword(s):  
Control System ◽  
Vector Control ◽  
Digital Signal Processor ◽  
Induction Motors ◽  
Digital Signal ◽  
Voltage Level ◽  
The Core ◽  
Three Phase ◽  
Vector Control System ◽  
Lower Voltage

Compared with traditional three-phase motors, six-phase induction motors due to their high reliabilities and low DC side voltages can achieve high power drives using devices with lower voltage level. In this paper, it analyzes the research status of six-phase induction motors, introduces the winding structures of six-phase induction motors, and finally designs the vector control system for six-phase induction motors taking the Digital Signal Processor (DSP) as the core. It introduces DSP circuit implementations, emphasizes to describe software structures of the control system, and proposes a detailed software flow chart.

scholarly journals Rancang Bangun Pengaman Panel Distribusi Tenaga Listrik Di Lippo Plaza Sidoarjo Dari Kebakaran Berbasis Arduino Nano

2017 ◽  
Vol 1 (2) ◽  
pp. 31
Author(s):  
Achmad Solih ◽  
Jamaaluddin Jamaaluddin
Keyword(s):  
Control System ◽  
Power Factor ◽  
Power Distribution ◽  
Low Voltage ◽  
Capacitor Bank ◽  
Warning Sign ◽  
Inductive Load ◽  
Three Phase ◽  
Working Principle ◽  
Power Distribution Control

Panel system power distribution at Lippo Plaza Mall Sidoarjo consists of several parts, namely from Cubicle 20 KV, 20 KV step-down transformer for 380 V, then the supply to LVMDP (Low Voltage Main Distribution Panel) The new panel to the user. Before delivery to users to note that the power factor is corrected using a capacitor bank. Less good a power factor is turned into inductive load on the capacitor bank so that temperatures high  because of high load resulting capacitor bank erupt. To overcome in this study proposes a safety panel automation power distribution control system using a microcontroller. Control system microcontrollers for safety panel power distribution consists of: Microcontroller (Arduino Nano), Light sensor (LDR), temperature sensor (LM35DZ), LCD 16x2 I2C, Actuators (fan, buzzer, relay switch breaker network three phase), switch ( relay 5 VDC), ADC as Input data. The working principle of this microcontroller LM35DZ if the sensor detects a high temperature fan will flash, if the LDR sensor detects sparks then the buzzer will sound as a warning sign of the dangers and disconnected the electricity network. From the design of a safety tool for power distribution panels due to high temperatures or sparks as well as the expected rate of fire outbreaks can be prevented.

scholarly journals A Novel Driving Scheme for Three-Phase Bearingless Induction Machine with Split Winding

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4930
Author(s):  
Francisco Elvis Carvalho Souza ◽  
Werbet Silva ◽  
Andrés Ortiz Salazar ◽  
José Paiva ◽  
Diego Moura ◽  
...  
Keyword(s):  
Control System ◽  
Digital Signal Processor ◽  
Position Control ◽  
Radial Position ◽  
Three Phase ◽  
Control Configuration ◽  
Two Phases ◽  
Split Winding ◽  
Drive And Control ◽  
And Control

In order to reduce the costs of implementing the radial position control system of a three-phase bearingless machine with split winding, this article proposes a driving method that uses only two phases of the system instead of the three-phase traditional one. It reduces from six to four the number of inverter legs, drivers, sensors, and current controllers necessary to drive and control the system. To justify the proposal, this new power and control configuration was applied to a 250 W machine controlled by a digital signal processor (DSP). The results obtained demonstrated that it is possible to carry out the radial position control through two phases, without loss of performance in relation to the conventional three-phase drive and control system.

scholarly journals Improving of operation stability of frequency converters with active rectifiers in electric steel-making complex electrical equipment switching

Vestnik IGEU ◽  
2019 ◽  
pp. 48-58
Author(s):  
A.A. Nikolaev ◽  
A.S. Denisevich ◽  
V.S. Ivekeev
Keyword(s):  
Control System ◽  
Power Supply ◽  
Electric Arc ◽  
Voltage Sags ◽  
Parallel Operation ◽  
Frequency Converters ◽  
Active Rectifier ◽  
Arc Furnaces ◽  
Operation Stability ◽  
Active Rectifiers

Frequency converters with active rectifiers (FC-AR) are now used in rolling mill electric drives. Modern control systems of ARs are not adapted to voltage sags in power supply systems, which leads to converter tripping. The known methods of ensuring AR operation stability, such as kinetic buffering, correction signals based on negative sequence voltage and others, do not eliminate these emergency trips. As an additional measure the paper proposes the method of voltage sag compensation by using static var compensators (SVC) of electric arc furnaces (EAF) for parallel operation of frequency converters with active rectifiers and electric arc furnaces. However, it remains unknown how disturbances (such as overvoltages of switching of SVC harmonic filters (HF) and voltage sags during furnace transformer switching) affect operation stability of frequency converters with active rectifiers. All this makes it necessary to study the effect of these processes on the operation conditions of FC-AR and to improve the active rectifier control system. The authors used experimental arrays of instantaneous values of voltages and currents of the real-life complex «EAF-SVC» («Electric Arc Furnace – Statistic VAR Compensator») in this study. They also applied mathematical models of FC-AR with different PWM algorithms realized in Matlab-Simulink software. The main assumption of the model consists in using equivalent current sources modelling the operation of autonomous voltage invertors. An improved control system of AR has been developed. The main feature that distinguishes it from the known systems is the fact that it ensures operation stability during SVC harmonic filter and EAF transformer switching by using a signal conditioning unit for setting the active rectifier reactive current component as a function of power supply and AR input voltage difference. Implementation of the improved AR control system improves FC-AR stability during parallel operation with EAFs through reactive power consumption of the supply system. As a result, it reduces the amplitude of inrush current and voltage deviations in the DC-link of the FC-AR to the values lower than the setpoints of the AR protection system.

Sign in / Sign up

Export Citation Format

Share Document