Behavior and performance of interactive multi-player game servers

Author(s):  
A. Abdelkhalek ◽  
A. Bilas ◽  
A. Moshovos
Keyword(s):  
2021 ◽  
Vol 9 (5) ◽  
pp. 232596712110088
Author(s):  
Ryan L. Crotin ◽  
Toshimasa Yanai ◽  
Peter Chalmers ◽  
Kenneth B. Smale ◽  
Brandon J. Erickson ◽  
...  

Background: There has been minimal research investigating injury and pitching performance differences between Major League Baseball (MLB) and other professional leagues. Purpose/Hypothesis: This 2-team comparison between MLB and Japan’s Nippon Professional Baseball (NPB) involved affiliated players over 5 years. We hypothesized that teams would differ in the injury incidence, mechanism of injury, pitch velocity, and pitch type usage. Study Design: Descriptive epidemiology study. Methods: Between 2015 and 2019, pitching data as well as injury statistics for the highest level and minor league affiliates of the Los Angeles Angels (MLB) and the Hiroshima Toyo Carp (NPB) were reviewed for significant differences in the injury prevalence, injury type, mechanism of injury, and days missed. In total, 3781 MLB and 371 NPB injuries were studied. Results: MLB-affiliated players were significantly younger, taller, and heavier ( P < .001) than were NPB-affiliated players. MLB-affiliated pitchers threw faster than did their NPB counterparts ( P = .026). MLB minor league pitchers threw more curveballs than did NPB minor league pitchers ( P = .004), and MLB minor league relief pitchers threw more sliders than did NPB minor league relief pitchers ( P = .02). The MLB team had a 3.7-fold higher incidence of injuries versus the NPB team (0.030 vs 0.008 injuries per player-game, respectively) as well as more repeat injuries, with fewer days missed per injury (15.8 ± 54.7 vs 36.2 ± 55.1 days, respectively; P < .001). The MLB team also had a higher percentage of injuries that were throwing related ( P < .001), were contact related ( P < .001), and occurred outside of competition ( P < .001) compared with the NPB team. Conclusion: This is the first empirical study examining injury trends and pitching characteristics between MLB and NPB athletes. MLB-affiliated pitchers threw faster and relied more on breaking pitches in comparison with NPB-affiliated pitchers. From injury data, MLB players were younger, taller, and heavier with a higher percentage of throwing-related injuries, contact injuries, and injuries sustained outside of competition. Overall, the MLB team indicated a 3.7-fold higher rate of reported injuries with fewer days missed per injury than did the NPB team. Competitive conditions are distinctly different between MLB and NPB, and thus, more extensive research collaborations in the future can identify best practices to advance health and performance for both leagues.


2017 ◽  
Vol 12 (3) ◽  
pp. 351-358
Author(s):  
Benjamin B Moore ◽  
Roger D Adams ◽  
Nicholas J O’Dwyer ◽  
Kylie A Steel ◽  
Stephen Cobley

This study examined whether laterality frequency, team familiarity, and game experience affected preferred kicking foot identification in professional Australian Football players. Using a repeated-measures experimental design, 13 and 10 players, respectively, identified the kicking foot of 30 teammates and 30 opponents using static images in a randomised sequence. Accuracy (%), reaction time (RT ms), and discrimination capability indices were examined. Overall, participants were less accurate and had slower reaction times when identifying the kicking foot of opposing team players relative to the speed and accuracy of identifying teammates. Significantly lower discrimination accuracy was also evident in participants’ capability to identify left-footed players from two different opposing teams. In moderating trends, opposing player game experience was correlated with accuracy and reduced reaction times, while participant game experience correlated with faster reaction times only. Laterality, (opposing) team familiarity, and game experience affect kicking foot identification in Australian Football with training and performance implications.


2021 ◽  
Vol 5 (3) ◽  
pp. 62
Author(s):  
Zhangcheng Feng ◽  
Wenying Xu ◽  
Jinde Cao

This paper investigates the distributed computation issue of generalized Nash equilibrium (GNE) in a multi-player game with shared coupling constraints. Two kinds of relatively fast distributed algorithms are constructed with alternating inertia and overrelaxation in the partial-decision information setting. We prove their convergence to GNE with fixed step-sizes by resorting to the operator splitting technique under the assumptions of Lipschitz continuity of the extended pseudo-gradient mappings. Finally, one numerical simulation is given to illustrate the efficiency and performance of the algorithm.


Author(s):  
H. M. Thieringer

It has repeatedly been show that with conventional electron microscopes very fine electron probes can be produced, therefore allowing various micro-techniques such as micro recording, X-ray microanalysis and convergent beam diffraction. In this paper the function and performance of an SIEMENS ELMISKOP 101 used as a scanning transmission microscope (STEM) is described. This mode of operation has some advantages over the conventional transmission microscopy (CTEM) especially for the observation of thick specimen, in spite of somewhat longer image recording times.Fig.1 shows schematically the ray path and the additional electronics of an ELMISKOP 101 working as a STEM. With a point-cathode, and using condensor I and the objective lens as a demagnifying system, an electron probe with a half-width ob about 25 Å and a typical current of 5.10-11 amp at 100 kV can be obtained in the back focal plane of the objective lens.


Author(s):  
Huang Min ◽  
P.S. Flora ◽  
C.J. Harland ◽  
J.A. Venables

A cylindrical mirror analyser (CMA) has been built with a parallel recording detection system. It is being used for angular resolved electron spectroscopy (ARES) within a SEM. The CMA has been optimised for imaging applications; the inner cylinder contains a magnetically focused and scanned, 30kV, SEM electron-optical column. The CMA has a large inner radius (50.8mm) and a large collection solid angle (Ω > 1sterad). An energy resolution (ΔE/E) of 1-2% has been achieved. The design and performance of the combination SEM/CMA instrument has been described previously and the CMA and detector system has been used for low voltage electron spectroscopy. Here we discuss the use of the CMA for ARES and present some preliminary results.The CMA has been designed for an axis-to-ring focus and uses an annular type detector. This detector consists of a channel-plate/YAG/mirror assembly which is optically coupled to either a photomultiplier for spectroscopy or a TV camera for parallel detection.


Author(s):  
Joe A. Mascorro ◽  
Gerald S. Kirby

Embedding media based upon an epoxy resin of choice and the acid anhydrides dodecenyl succinic anhydride (DDSA), nadic methyl anhydride (NMA), and catalyzed by the tertiary amine 2,4,6-Tri(dimethylaminomethyl) phenol (DMP-30) are widely used in biological electron microscopy. These media possess a viscosity character that can impair tissue infiltration, particularly if original Epon 812 is utilized as the base resin. Other resins that are considerably less viscous than Epon 812 now are available as replacements. Likewise, nonenyl succinic anhydride (NSA) and dimethylaminoethanol (DMAE) are more fluid than their counterparts DDSA and DMP- 30 commonly used in earlier formulations. This work utilizes novel epoxy and anhydride combinations in order to produce embedding media with desirable flow rate and viscosity parameters that, in turn, would allow the medium to optimally infiltrate tissues. Specifically, embeding media based on EmBed 812 or LX 112 with NSA (in place of DDSA) and DMAE (replacing DMP-30), with NMA remaining constant, are formulated and offered as alternatives for routine biological work.Individual epoxy resins (Table I) or complete embedding media (Tables II-III) were tested for flow rate and viscosity. The novel media were further examined for their ability to infilftrate tissues, polymerize, sectioning and staining character, as well as strength and stability to the electron beam and column vacuum. For physical comparisons, a volume (9 ml) of either resin or media was aspirated into a capillary viscocimeter oriented vertically. The material was then allowed to flow out freely under the influence of gravity and the flow time necessary for the volume to exit was recored (Col B,C; Tables). In addition, the volume flow rate (ml flowing/second; Col D, Tables) was measured. Viscosity (n) could then be determined by using the Hagen-Poiseville relation for laminar flow, n = c.p/Q, where c = a geometric constant from an instrument calibration with water, p = mass density, and Q = volume flow rate. Mass weight and density of the materials were determined as well (Col F,G; Tables). Infiltration schedules utilized were short (1/2 hr 1:1, 3 hrs full resin), intermediate (1/2 hr 1:1, 6 hrs full resin) , or long (1/2 hr 1:1, 6 hrs full resin) in total time. Polymerization schedules ranging from 15 hrs (overnight) through 24, 36, or 48 hrs were tested. Sections demonstrating gold interference colors were collected on unsupported 200- 300 mesh grids and stained sequentially with uranyl acetate and lead citrate.


Author(s):  
D. E. Newbury ◽  
R. D. Leapman

Trace constituents, which can be very loosely defined as those present at concentration levels below 1 percent, often exert influence on structure, properties, and performance far greater than what might be estimated from their proportion alone. Defining the role of trace constituents in the microstructure, or indeed even determining their location, makes great demands on the available array of microanalytical tools. These demands become increasingly more challenging as the dimensions of the volume element to be probed become smaller. For example, a cubic volume element of silicon with an edge dimension of 1 micrometer contains approximately 5×1010 atoms. High performance secondary ion mass spectrometry (SIMS) can be used to measure trace constituents to levels of hundreds of parts per billion from such a volume element (e. g., detection of at least 100 atoms to give 10% reproducibility with an overall detection efficiency of 1%, considering ionization, transmission, and counting).


1986 ◽  
Vol 50 (5) ◽  
pp. 264-267 ◽  
Author(s):  
GH Westerman ◽  
TG Grandy ◽  
JV Lupo ◽  
RE Mitchell

2008 ◽  
Vol 17 (3) ◽  
pp. 87-92
Author(s):  
Leonard L. LaPointe

Abstract Loss of implicit linguistic competence assumes a loss of linguistic rules, necessary linguistic computations, or representations. In aphasia, the inherent neurological damage is frequently assumed by some to be a loss of implicit linguistic competence that has damaged or wiped out neural centers or pathways that are necessary for maintenance of the language rules and representations needed to communicate. Not everyone agrees with this view of language use in aphasia. The measurement of implicit language competence, although apparently necessary and satisfying for theoretic linguistics, is complexly interwoven with performance factors. Transience, stimulability, and variability in aphasia language use provide evidence for an access deficit model that supports performance loss. Advances in understanding linguistic competence and performance may be informed by careful study of bilingual language acquisition and loss, the language of savants, the language of feral children, and advances in neuroimaging. Social models of aphasia treatment, coupled with an access deficit view of aphasia, can salve our restless minds and allow pursuit of maximum interactive communication goals even without a comfortable explanation of implicit linguistic competence in aphasia.


Sign in / Sign up

Export Citation Format

Share Document