Long-term stability of resistors embedded in printed circuit board

2011 ◽  
Author(s):  
Damian Nowak ◽  
Pawel Winiarski ◽  
Adam Klossowicz ◽  
Andrzej Dziedzic ◽  
Wojciech Steplewski ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Circuit Board ◽  
Printed Circuit ◽  
Term Stability ◽  
Long Term Stability

scholarly journals Ultra-compact capacitively loaded evanescent half-mode SIW filters for LTE applications

2014 ◽  
Vol 6 (5) ◽  
pp. 487-490 ◽  
Author(s):  
Tinus Stander ◽  
Saurabh Sinha
Keyword(s):  
Printed Circuit Board ◽  
Circuit Board ◽  
Center Frequency ◽  
Fractional Bandwidth ◽  
Third Order ◽  
Printed Circuit ◽  
Term Evolution ◽  
Waveguide Filter ◽  
Capacitive Loading

This paper presents a novel miniaturized substrate integrated waveguide filter by combining both half-mode resonators and capacitive loading on a conventional two-layer printed circuit board (PCB) process. The resulting synthesis is successfully demonstrated in an long-term evolution application by means of a third-order filter of <225 mm2in size while featuring 2.3 dB insertion loss over a 5.5% fractional bandwidth at 3.7 GHz. Good first-iteration agreement between simulated and measured results, both in center frequency and bandwidth, are achieved.

scholarly journals Evaluation of printed-circuit boards materials for high temperature operation

2017 ◽  
Vol 2017 (HiTEN) ◽  
pp. 000057-000062
Author(s):  
Oriol Aviño-Salvado ◽  
Wissam Sabbah ◽  
Cyril Buttay ◽  
Hervé Morel ◽  
Pascal Bevilacqua
Keyword(s):  
High Temperature ◽  
Printed Circuit Boards ◽  
Printed Circuit Board ◽  
Circuit Board ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Physical Measurements ◽  
Epoxy Material ◽  
High Temperature Operation

ABSTRACT This article presents the long term (1000 h) behaviour of two printed-circuit board materials (Panasonic R1755V, a high-TG glass-epoxy composite and Arlon 85N, a polyimide-based laminate) stored at high temperature (190 °C). Tests are performed in air and in nitrogen atmospheres. Electrical and physical measurements are performed regularly (once per week). Almost no degradation is observed for both materials, when stored in nitrogen. On the contrary, the board stored in air show the consequences of ageing. This is especially true for the glass-epoxy material, which becomes unusable after 2 weeks, because of large swelling.

scholarly journals ARREGLO DE ANTENAS CON BAJO ACOPLAMIENTO MUTUO PARA SISTEMAS DE COMUNICACIONES INALÁMBRICAS MIMO-LTE

2017 ◽  
Vol 1 (27) ◽  
Author(s):  
Eduardo Rodríguez Araque ◽  
Roberto G. Rojas-Teran
Keyword(s):  
Printed Circuit Board ◽  
Multiple Input Multiple Output ◽  
Long Term Evolution ◽  
Circuit Board ◽  
Printed Circuit ◽  
Term Evolution ◽  
Multiple Input ◽  
Input Multiple Output

Este trabajo trata de un arreglo de antenas MIMO (multiple-input-multiple-output) que opera en la banda de 2.6 GHz, una banda de Long Term Evolution (LTE), para sistemas de comunicaciones móviles inalámbricas 4G. El arreglo de antenas consiste de 4 antenas compactas tipo patch sobre un substrato dieléctrico (PCB) de 125 mm x 62.5 mm x 1.27 mm. Modificaciones del plano de tierra (GND) junto con la ubicación sistemática y orientación de cada antena en la cara posterior al plano de tierra del PCB (Printed Circuit Board) juegan un rol muy importante en la reducción sustancial del acoplamiento mutuo, esto generalmente afecta el desempeño de los arreglos MIMO.Palabras clave: Arreglo de antenas, modos característicos, correlación espacial, multiple-input-multiple-output (MIMO), acoplamiento mutuo.

scholarly journals Evaluation of Printed-Circuit Board Materials for High-Temperature Operation

2017 ◽  
Vol 14 (4) ◽  
pp. 166-171
Author(s):  
Oriol Aviño-Salvado ◽  
Wissam Sabbah ◽  
Cyril Buttay ◽  
Hervé Morel ◽  
Pascal Bevilacqua
Keyword(s):  
High Temperature ◽  
Printed Circuit Board ◽  
Epoxy Composite ◽  
Circuit Board ◽  
Printed Circuit ◽  
Physical Measurements ◽  
Epoxy Material ◽  
High Temperature Operation

This article presents the long-term (1,000 h) behavior of two printed-circuit board materials (Panasonic R1755V, a high-TG glass-epoxy composite and Arlon 85N, a polyimide-based laminate) stored at high temperature (190°C). Tests are performed in air and in nitrogen atmospheres. Electrical and physical measurements are performed regularly (once per week). Almost no degradation is observed for both materials when stored in nitrogen. On the contrary, the board stored in air shows the consequences of ageing. This is especially true for the glass-epoxy material, which becomes unusable after 2 w, because of large swelling.

Sign in / Sign up

Export Citation Format

Share Document