Integrated Ground Reaction Force Sensing and Terrain Classification for Small Legged Robots

2016 ◽  
Vol 1 (2) ◽  
pp. 1125-1132 ◽  
Author(s):  
X. Alice Wu ◽  
Tae Myung Huh ◽  
Rudranarayan Mukherjee ◽  
Mark Cutkosky
2020 ◽  
Vol 10 (8) ◽  
pp. 2638 ◽  
Author(s):  
Shuo Gao ◽  
Yixuan Wang ◽  
Chaoming Fang ◽  
Lijun Xu

Automatic terrain classification in lower limb rehabilitation systems has gained worldwide attention. In this field, a simple system architecture and high classification accuracy are two desired attributes. In this article, a smart neuromuscular–mechanical fusion and machine learning-based terrain classification technique utilizing only two electromyography (EMG) sensors and two ground reaction force (GRF) sensors is reported for classifying three different terrains (downhill, level, and uphill). The EMG and GRF signals from ten healthy subjects were collected, preprocessed and segmented to obtain the EMG and GRF profiles in each stride, based on which twenty-one statistical features, including 9 GRF features and 12 EMG features, were extracted. A support vector machine (SVM) machine learning model is established and trained by the extracted EMG features, GRF features and the fusion of them, respectively. Several methods or statistical metrics were used to evaluate the goodness of the proposed technique, including a paired-t-test and Kruskal–Wallis test for correlation analysis of the selected features and ten-fold cross-validation accuracy, confusion matrix, sensitivity and specificity for the performance of the SVM model. The results show that the extracted features are highly correlated with the terrain changes and the fusion of the EMG and GRF features produces the highest accuracy of 96.8%. The presented technique allows simple system construction to achieve the precise detection of outcomes, potentially advancing the development of terrain classification techniques for rehabilitation.


2014 ◽  
Vol 30 (1) ◽  
pp. 21-30 ◽  
Author(s):  
Joseph F. Seay ◽  
Peter N. Frykman ◽  
Shane G. Sauer ◽  
David J. Gutekunst

During group marches, soldiers must walk in step with one another at the same imposed cadence. The literature suggests that shorter trainees may be more susceptible to injury due to overstriding that can occur when taller recruits dictate marching cadence. This study assessed the effects of fixed cadence simulated marching at cadences above and below preferred step rate (PSR) on lower extremity joint mechanics in individuals who were unaccustomed to marching. During three separate visits, 13 volunteers walked with a 20 kg load on a force-sensing treadmill at self-selected PSR, PSR+15% (shorter strides), and PSR–15% (longer strides) at 1.3 m/s for 60 min. Two-way RM ANOVAs (cadence by time) were performed during the stance phase. Ranges of motion and anteroposterior ground reaction force increased significantly as cadence decreased (P< .03). Knee extension moment increased slightly when step rate decreased from PSR+15% (shortest strides, 0.85 ± 0.2 N m/kg) to PSR (0.87 ± 0.3 N m/kg, 3% increase); however, this increase was substantially greater (20% increase) when cadence was decreased from PSR to PSR–15% (longest strides, 1.09 ± 0.3 N m/kg). Our results indicate that overstriding during fixed-cadence marching is a factor that can substantially increase mechanical stress on lower extremity joints.


2020 ◽  
Vol 25 (1) ◽  
pp. 66-75 ◽  
Author(s):  
Sangjoon Jonathan Kim ◽  
Gwang Min Gu ◽  
Youngjin Na ◽  
Junghoon Park ◽  
Yeongjin Kim ◽  
...  

2019 ◽  
Vol 126 (5) ◽  
pp. 1315-1325 ◽  
Author(s):  
Andrew B. Udofa ◽  
Kenneth P. Clark ◽  
Laurence J. Ryan ◽  
Peter G. Weyand

Although running shoes alter foot-ground reaction forces, particularly during impact, how they do so is incompletely understood. Here, we hypothesized that footwear effects on running ground reaction force-time patterns can be accurately predicted from the motion of two components of the body’s mass (mb): the contacting lower-limb (m1 = 0.08mb) and the remainder (m2 = 0.92mb). Simultaneous motion and vertical ground reaction force-time data were acquired at 1,000 Hz from eight uninstructed subjects running on a force-instrumented treadmill at 4.0 and 7.0 m/s under four footwear conditions: barefoot, minimal sole, thin sole, and thick sole. Vertical ground reaction force-time patterns were generated from the two-mass model using body mass and footfall-specific measures of contact time, aerial time, and lower-limb impact deceleration. Model force-time patterns generated using the empirical inputs acquired for each footfall matched the measured patterns closely across the four footwear conditions at both protocol speeds ( r2 = 0.96 ± 0.004; root mean squared error  = 0.17 ± 0.01 body-weight units; n = 275 total footfalls). Foot landing angles (θF) were inversely related to footwear thickness; more positive or plantar-flexed landing angles coincided with longer-impact durations and force-time patterns lacking distinct rising-edge force peaks. Our results support three conclusions: 1) running ground reaction force-time patterns across footwear conditions can be accurately predicted using our two-mass, two-impulse model, 2) impact forces, regardless of foot strike mechanics, can be accurately quantified from lower-limb motion and a fixed anatomical mass (0.08mb), and 3) runners maintain similar loading rates (ΔFvertical/Δtime) across footwear conditions by altering foot strike angle to regulate the duration of impact. NEW & NOTEWORTHY Here, we validate a two-mass, two-impulse model of running vertical ground reaction forces across four footwear thickness conditions (barefoot, minimal, thin, thick). Our model allows the impact portion of the impulse to be extracted from measured total ground reaction force-time patterns using motion data from the ankle. The gait adjustments observed across footwear conditions revealed that runners maintained similar loading rates across footwear conditions by altering foot strike angles to regulate the duration of impact.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sung Eun Kim ◽  
Jangyun Lee ◽  
Sae Yong Lee ◽  
Hae-Dong Lee ◽  
Jae Kun Shim ◽  
...  

AbstractThe purpose of this study was to investigate how the ball position along the mediolateral (M-L) direction of a golfer causes a chain effect in the ground reaction force, body segment and joint angles, and whole-body centre of mass during the golf swing. Twenty professional golfers were asked to complete five straight shots for each 5 different ball positions along M-L: 4.27 cm (ball diameter), 2.14 cm (ball radius), 0 cm (reference position at preferred ball position), – 2.14 cm, and – 4.27 cm, while their ground reaction force and body segment motions were captured. The dependant variables were calculated at 14 swing events from address to impact, and the differences between the ball positions were evaluated using Statistical Parametric Mapping. The left-sided ball positions at address showed a greater weight distribution on the left foot with a more open shoulder angle compared to the reference ball position, whereas the trend was reversed for the right-sided ball positions. These trends disappeared during the backswing and reappeared during the downswing. The whole-body centre of mass was also located towards the target for the left-sided ball positions throughout the golf swing compared to the reference ball position, whereas the trend was reversed for the right-sided ball positions. We have concluded that initial ball position at address can cause a series of chain effects throughout the golf swing.


Sign in / Sign up

Export Citation Format

Share Document