Dielectric properties of human active liver, kidney and spleen compared to those of respective inactive tissues, porcine tissues and the data provided by a database in the frequency range of 10Hz to 100MHz

Author(s):  
Lei Wang ◽  
Hang Wang ◽  
Canhua Xu ◽  
Zhenyu Ji ◽  
Jianbo Li ◽  
...  
2012 ◽  
Vol 19 (06) ◽  
pp. 1250062 ◽  
Author(s):  
X. H. ZHANG ◽  
Y. L. YUE ◽  
H. T. WU

Boroaluminosilicate glasses containing La2O3 were prepared by the normal quenching method. The glass transition temperatures (Tg) were measured by differential scanning calorimetry (DSC). The structural role of RO was investigated by nuclear magnetic resonance (NMR). Chemical durability was evaluated by weight losses of glass samples after immersion in HC1 solution. High resolution scanning electron microscopy (HR-SEM) was used to examine the surface micrographs of corroded glass samples. The dielectric constant and tangent loss were measured in the frequency range 10–106 Hz. The results revealed that chemical durability and dielectric properties increased with increasing La2O3 content.


1994 ◽  
Vol 19 ◽  
pp. 92-96 ◽  
Author(s):  
TH. Achammer ◽  
A. Denoth

Broadband measurements of dielectric properties of natural snow samples near or at 0°C are reported. Measurement quantities are: dielectric permittivity, loss factor and complex propagation factor for electromagnetic waves. X-band measurements were made in a cold room in the laboratory; measurements at low and intermediate frequencies were carried out both in the field (Stubai Alps, 3300 m; Hafelekar near Innsbruck, 2100 m) and in the cold room. Results show that in the different frequency ranges the relative effect on snow dielectric properties of the parameters: density, grain-size and shape, liquid water content, shape and distribution of liquid inclusions and content of impurities, varies significantly. In the low-frequency range the influence of grain-size and shape and snow density dominates; in the medium-frequency range liquid water content and density are the dominant parameters. In the microwave X-band the influence of the amount, shape and distribution of liquid inclusions and snow density is more important than that of the remaining parameters.


1978 ◽  
Vol 51 (1) ◽  
pp. 72-80 ◽  
Author(s):  
R. Bakule ◽  
A. Havránek

Abstract The dielectric properties of natural rubber, synthetic polyisoprene, andpolybutadiene samples crosslinked with sulfur and of natural rubber samplescrosslinked simultaneously with sulfur and dicumyl peroxide were studied. Inthe investigated systems, the number of polar groups in unit volume and thecrosslink density may be changed independently over relatively wide ranges.The measurements were performed in the frequency range from 101 to 105 Hzat various temperatures, and macroscopic parameters describing the dielectricproperties of the samples were evaluated. The position and intensity of thedielectric dispersion peak in the main transition zone is only slightly dependenton the crosslink density of the samples. These two values are mainly influencedby the amount of combined sulfur, or more generally, by the number and thedipole moments of polar groups in the sample. The influence of crosslink densityon the width of the absorption curve is very strong; the width increases withincreasing crosslink density. The possibility of explaining this effect in termsof the dependence of the free volume distribution function on crosslink densityis discussed.


2019 ◽  
Vol 14 (30) ◽  
pp. 64-72
Author(s):  
Ahmad A. Hasan

A.C electrical conductivity and dielectric properties for poly(vinyl alcohol) (PVA) /poly (ethylene oxide) (PEO) blends undopedand doped with multi-walled carbon nanotube (MWCNTs) withdifferent concentrations (1, and 3 wt %) in the frequency range(25x103 - 5x106 Hz) were investigated. Samples of (PVA/PEO)blends undoped and doped with MWCNTs were prepared usingcasting technique. The electrical conductivity measurements showedthat σA.C is frequency dependent and obey the relation σA.C =Aωs forundoped and doped blends with 1% MWCNTs, while it is frequencyindependent with increases of MWCNTs content to 3%. Theexponent s showed proceeding increase with the increase of PEOratio (≥50%) for undoped blends samples, while s value for dopedblends exhibits to change in different manner, i.e. s increases andreach maximum value at 50/50 PVA/PEO, then decreases forresidual doped blends samples with 1% MWCNTs on the other handthe exponent s decrease and reach minimum value at 50/50PVA/PEO for samples doped with 3% MWCNTs, then return toincrease. The results explained in different terms.


Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Soumya Sundar Pattanayak ◽  
Soumen Biswas

Abstract The quality of agricultural products can be remotely sensed and enhanced by determining the dielectric properties. This paper studies the dielectric properties of banana leaf and banana peel over the frequency range 1–20 GHz using the open-ended coaxial probe (OCP) method. A new curve fitting model is proposed to characterize the dielectric properties of banana leaf and banana peel. The different moisture content (MC) levels are considered for both banana leaf and banana peel samples and, their dielectric properties are characterized. Further, the banana leaf and banana peel’s measurement data are compared with the data obtained using the proposed model. In addition, Root Mean Square Error (RMSE) and R-squared (R 2) are calculated to validate the performance of the proposed model. In case of banana leaf at 68.26% MC, the dielectric constant achieves the value of R 2 and RMSE of 0.98 and 0.0648, respectively. Similarly, dielectric loss achieves the value of R 2 and RMSE of 0.88 and 0.0795, respectively. Further, for banana peel at 80.89% MC, the dielectric constant achieves the value of R 2 and RMSE of 0.99 and 0.2989, respectively. Similarly, dielectric loss achieves the value of R 2 and RMSE of 0.96 and 0.6132, respectively.


Sign in / Sign up

Export Citation Format

Share Document