Delay Performance Evaluation of a Token Ring LAN Under Real-Time Load Conditions

Author(s):  
N.K. Nanda ◽  
G.L.C. Nadela
Metals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1424
Author(s):  
Daehwan Cho ◽  
Joonhong Park ◽  
Jaeil Kim

Studies have been actively conducted on systems that prevent the breakage of water pipes from freezing in winter. Shape memory alloy (SMA) coil springs have been used as the key components of actuators that can operate automatically by detecting the real-time outside temperature changes, but research on its use as an actuator that can operate at sub-zero temperatures is insufficient. This study proposes the anti-freezing system using Ni-44.08Ti-1.46Co (wt.%) SMA coil springs that operate near sub-zero temperatures to prevent the freezing accident of water pipes. After fabricating the SMA coil springs, the test for performance evaluation of the springs applied static load conditions was conducted on the specific outside temperature. To examine the operation of anti-freezing systems applied the SMA coil spring as an actuator, the water discharge test (WDT) was also conducted along with the computational fluid simulation. The results of water discharge measurement obtained by WDT, simulations, and theoretical equations applied to the fluid resupply system constructed were compared with each other to verify the reliability. Consequently, it was confirmed that water discharge can be automatically controlled in real time according to temperature changes of SMA coil springs in the anti-freezing system.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3274
Author(s):  
Jose Rueda Torres ◽  
Zameer Ahmad ◽  
Nidarshan Veera Kumar ◽  
Elyas Rakhshani ◽  
Ebrahim Adabi ◽  
...  

Future electrical power systems will be dominated by power electronic converters, which are deployed for the integration of renewable power plants, responsive demand, and different types of storage systems. The stability of such systems will strongly depend on the control strategies attached to the converters. In this context, laboratory-scale setups are becoming the key tools for prototyping and evaluating the performance and robustness of different converter technologies and control strategies. The performance evaluation of control strategies for dynamic frequency support using fast active power regulation (FAPR) requires the urgent development of a suitable power hardware-in-the-loop (PHIL) setup. In this paper, the most prominent emerging types of FAPR are selected and studied: droop-based FAPR, droop derivative-based FAPR, and virtual synchronous power (VSP)-based FAPR. A novel setup for PHIL-based performance evaluation of these strategies is proposed. The setup combines the advanced modeling and simulation functions of a real-time digital simulation platform (RTDS), an external programmable unit to implement the studied FAPR control strategies as digital controllers, and actual hardware. The hardware setup consists of a grid emulator to recreate the dynamic response as seen from the interface bus of the grid side converter of a power electronic-interfaced device (e.g., type-IV wind turbines), and a mockup voltage source converter (VSC, i.e., a device under test (DUT)). The DUT is virtually interfaced to one high-voltage bus of the electromagnetic transient (EMT) representation of a variant of the IEEE 9 bus test system, which has been modified to consider an operating condition with 52% of the total supply provided by wind power generation. The selected and programmed FAPR strategies are applied to the DUT, with the ultimate goal of ascertaining its feasibility and effectiveness with respect to the pure software-based EMT representation performed in real time. Particularly, the time-varying response of the active power injection by each FAPR control strategy and the impact on the instantaneous frequency excursions occurring in the frequency containment periods are analyzed. The performed tests show the degree of improvements on both the rate-of-change-of-frequency (RoCoF) and the maximum frequency excursion (e.g., nadir).


2020 ◽  
Vol 41 (S1) ◽  
pp. s367-s368
Author(s):  
Michael Korvink ◽  
John Martin ◽  
Michael Long

Background: The Bundled Payment Care Improvement Program is a CMS initiative designed to encourage greater collaboration across settings of care, especially as it relates to an initial set of targeted clinical episodes, which include sepsis and pneumonia. As with many CMS incentive programs, performance evaluation is retrospective in nature, resulting in after-the-fact changes in operational processes to improve both efficiency and quality. Although retrospective performance evaluation is informative, care providers would ideally identify a patient’s potential clinical cohort during the index stay and implement care management procedures as necessary to prevent or reduce the severity of the condition. The primary challenges for real-time identification of a patient’s clinical cohort are CMS-targeted cohorts are based on either MS-DRG (grouping of ICD-10 codes) or HCPCS coding—coding that occurs after discharge by clinical abstractors. Additionally, many informative data elements in the EHR lack standardization and no simple and reliable heuristic rules can be employed to meaningfully identify those cohorts without human review. Objective: To share the results of an ensemble statistical model to predict patient risks of sepsis and pneumonia during their hospital (ie, index) stay. Methods: The predictive model uses a combination of Bernoulli Naïve Bayes natural language processing (NLP) classifiers, to reduce text dimensionality into a single probability value, and an eXtreme Gradient Boosting (XGBoost) algorithm as a meta-model to collectively evaluate both standardized clinical elements alongside the NLP-based text probabilities. Results: Bernoulli Naïve Bayes classifiers have proven to perform well on short text strings and allow for highly explanatory unstructured or semistructured text fields (eg, reason for visit, culture results), to be used in a both comparative and generalizable way within the larger XGBoost model. Conclusions: The choice of XGBoost as the meta-model has the benefits of mitigating concerns of nonlinearity among clinical features, reducing potential of overfitting, while allowing missing values to exist within the data. Both the Bayesian classifier and meta-model were trained using a patient-level integrated dataset extracted from both a patient-billing and EHR data warehouse maintained by Premier. The data set, joined by patient admission-date, medical record number, date of birth, and hospital entity code, allows the presence of both the coded clinical cohort (derived from the MS-DRG) and the explanatory features in the EHR to exist within a single patient encounter record. The resulting model produced F1 performance scores of .65 for the sepsis population and .61 for the pneumonia population.Funding: NoneDisclosures: None


Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 556
Author(s):  
Lucia Lo Bello ◽  
Gaetano Patti ◽  
Giancarlo Vasta

The IEEE 802.1Q-2018 standard embeds in Ethernet bridges novel features that are very important for automated driving, such as the support for time-driven communications. However, cars move in a world where unpredictable events may occur and determine unforeseen situations. To properly react to such situations, the in-car communication system has to support event-driven transmissions with very low and bounded delays. This work provides the performance evaluation of EDSched, a traffic management scheme for IEEE 802.1Q bridges and end nodes that introduces explicit support for event-driven real-time traffic. EDSched works at the MAC layer and builds upon the mechanisms defined in the IEEE 802.1Q-2018 standard.


2021 ◽  
Vol 11 (1) ◽  
pp. 377
Author(s):  
Michele Scarpiniti ◽  
Enzo Baccarelli ◽  
Alireza Momenzadeh ◽  
Sima Sarv Ahrabi

The recent introduction of the so-called Conditional Neural Networks (CDNNs) with multiple early exits, executed atop virtualized multi-tier Fog platforms, makes feasible the real-time and energy-efficient execution of analytics required by future Internet applications. However, until now, toolkits for the evaluation of energy-vs.-delay performance of the inference phase of CDNNs executed on such platforms, have not been available. Motivated by these considerations, in this contribution, we present DeepFogSim. It is a MATLAB-supported software toolbox aiming at testing the performance of virtualized technological platforms for the real-time distributed execution of the inference phase of CDNNs with early exits under IoT realms. The main peculiar features of the proposed DeepFogSim toolbox are that: (i) it allows the joint dynamic energy-aware optimization of the Fog-hosted computing-networking resources under hard constraints on the tolerated inference delays; (ii) it allows the repeatable and customizable simulation of the resulting energy-delay performance of the overall Fog execution platform; (iii) it allows the dynamic tracking of the performed resource allocation under time-varying operating conditions and/or failure events; and (iv) it is equipped with a user-friendly Graphic User Interface (GUI) that supports a number of graphic formats for data rendering. Some numerical results give evidence for about the actual capabilities of the proposed DeepFogSim toolbox.


Sign in / Sign up

Export Citation Format

Share Document