Cross-Correlation and Sine-Fitting Techniques for High-Resolution Ultrasonic Ranging

2010 ◽  
Vol 59 (12) ◽  
pp. 3227-3236 ◽  
Author(s):  
Ricardo Queiros ◽  
Francisco Correa Alegria ◽  
Pedro Silva Girao ◽  
António Cruz Serra
2019 ◽  
Vol 9 (7) ◽  
pp. 1483 ◽  
Author(s):  
Lecheng Jia ◽  
Bin Xue ◽  
Shili Chen ◽  
Hanzhong Wu ◽  
Xiaoxia Yang ◽  
...  

Ultrasound has been proven to be a valid tool for ranging, especially in water. In this paper, we design a high-resolution ultrasonic ranging system that uses a thin laser beam as an ultrasonic sensor. The laser sensing provides a noncontact method for ultrasound detection based on acousto-optic diffraction. Unlike conventional methods, the ultrasound transmitted from the transducer is recorded as the reference signal when it first passes through the laser. It can be used to improve the accuracy and resolution of the time-of-flight (TOF) by a cross-correlation method. Transducers with a central frequency of 1 MHz and diameters of 20 mm and 28 mm are used in the experiment. Five targets and a test piece are used to evaluate the ranging performance. The sound velocity is measured by the sound velocity profiler (SVP). The repeatability error of TOF is less than 4 ns, and the theoretical resolution of TOF is 0.4 ns. The results show a measurement resolution within one-tenth of the wavelength of ultrasound and an accuracy better than 0.3 mm for targets at a distance up to 0.8 m. The proposed system has potential applications in underwater ranging and thickness detection.


Author(s):  
Michael Radermacher ◽  
Teresa Ruiz

Biological samples are radiation-sensitive and require imaging under low-dose conditions to minimize damage. As a result, images contain a high level of noise and exhibit signal-to-noise ratios that are typically significantly smaller than 1. Averaging techniques, either implicit or explicit, are used to overcome the limitations imposed by the high level of noise. Averaging of 2D images showing the same molecule in the same orientation results in highly significant projections. A high-resolution structure can be obtained by combining the information from many single-particle images to determine a 3D structure. Similarly, averaging of multiple copies of macromolecular assembly subvolumes extracted from tomographic reconstructions can lead to a virtually noise-free high-resolution structure. Cross-correlation methods are often used in the alignment and classification steps of averaging processes for both 2D images and 3D volumes. However, the high noise level can bias alignment and certain classification results. While other approaches may be implicitly affected, sensitivity to noise is most apparent in multireference alignments, 3D reference-based projection alignments and projection-based volume alignments. Here, the influence of the image signal-to-noise ratio on the value of the cross-correlation coefficient is analyzed and a method for compensating for this effect is provided.


1999 ◽  
Vol 170 ◽  
pp. 63-67
Author(s):  
I. V. Ilyin ◽  
R. Duemmler

AbstractWe briefly describe the instrumental effects which affect the accuracy of the radial velocity measurements. We have implemented several methods to correct for the instability effects and improve the accuracy of the measurements. These include modifications of the observational strategy and a time-dependent wavelength solution as well as a discussion of the error of the offset from cross-correlation. These methods are applied to observations obtained with the high resolution échelle spectrograph SOFIN mounted at the Cassegrain focus of the alt-azimuth 2.56-m Nordic Optical Telescope, La Palma, Canary Islands.


2020 ◽  
Vol 494 (1) ◽  
pp. 363-377 ◽  
Author(s):  
Samuel H C Cabot ◽  
Nikku Madhusudhan ◽  
Luis Welbanks ◽  
Anjali Piette ◽  
Siddharth Gandhi

ABSTRACT The class of ultra-hot Jupiters comprises giant exoplanets undergoing intense irradiation from their host stars. They have proved to be a particularly interesting population for their orbital and atmospheric properties. One such planet, WASP-121b, is in a highly misaligned orbit close to its Roche limit, and its atmosphere exhibits a thermal inversion. These properties make WASP-121b an interesting target for additional atmospheric characterization. In this paper, we present analyses of archival high-resolution optical spectra obtained during transits of WASP-121b. We model the Rossiter-McLaughlin effect and the Centre-to-Limb Variation and find that they do not significantly affect the transmission spectrum in this case. However, we discuss scenarios where these effects warrant more careful treatment by modelling the WASP-121 system and varying its properties. We report a new detection of atmospheric absorption from H α in the planet with a transit depth of $1.87\pm 0.11{{\ \rm per\ cent}}$. We further confirm a previous detection of the Na i doublet, and report a new detection of Fe i via cross-correlation with a model template. We attribute the H α absorption to an extended Hydrogen atmosphere, potentially undergoing escape, and the Fe i to equilibrium chemistry at the planetary photosphere. These detections help to constrain the composition and chemical processes in the atmosphere of WASP-121b.


2020 ◽  
Vol 495 (1) ◽  
pp. 224-237 ◽  
Author(s):  
Siddharth Gandhi ◽  
Matteo Brogi ◽  
Sergei N Yurchenko ◽  
Jonathan Tennyson ◽  
Phillip A Coles ◽  
...  

ABSTRACT High-resolution spectroscopy (HRS) has been used to detect a number of species in the atmospheres of hot Jupiters. Key to such detections is accurately and precisely modelled spectra for cross-correlation against the R ≳ 20 000 observations. There is a need for the latest generation of opacities which form the basis for high signal-to-noise detections using such spectra. In this study we present and make publicly available cross-sections for six molecular species, H2O, CO, HCN, CH4, NH3, and CO2 using the latest line lists most suitable for low- and high-resolution spectroscopy. We focus on the infrared (0.95–5 μm) and between 500 and 1500 K where these species have strong spectral signatures. We generate these cross-sections on a grid of pressures and temperatures typical for the photospheres of super-Earth, warm Neptunes, and hot Jupiters using the latest H2 and He pressure broadening. We highlight the most prominent infrared spectral features by modelling three representative exoplanets, GJ 1214 b, GJ 3470 b, and HD 189733 b, which encompass a wide range in temperature, mass, and radii. In addition, we verify the line lists for H2O, CO, and HCN with previous high-resolution observations of hot Jupiters. However, we are unable to detect CH4 with our new cross-sections from HRS observations of HD 102195 b. These high-accuracy opacities are critical for atmospheric detections with HRS and will be continually updated as new data become available.


2006 ◽  
Vol 2 (S240) ◽  
pp. 690-696
Author(s):  
D. Montes ◽  
I. Crespo-Chacón ◽  
M.C. Gálvez ◽  
M.J. Fernández-Figueroa

AbstractHigh-resolution echelle spectroscopic observations taken with the FEROS spectrograph at the ESO 2.2-m telescope confirm the binary nature of the dMe stars EUVE J0825−16.3 and EUVE J1501−43.6, previously reported by Christian & Mathioudakis (2002). In these binary systems, emission of similar intensity from both components is detected in the Na i D1 & D2, He i D3, Ca II H&K, Ca II IRT and Balmer lines. We have determined precise radial velocities by cross-correlation with radial velocity standard stars, which have allowed us to obtain for the first time the orbital solution of these systems. Both binaries consist of two nearly equal M0V components with an orbital period shorter than 3.5 days. We have analyzed the behaviour of the chromospheric activity indicators (variability and possible flares). In addition, we have determined its rotational velocity and kinematics.


Sign in / Sign up

Export Citation Format

Share Document