Characterization of Kilohertz-Ignited Nonthermal He and He/ ${\rm O}_{2}$ Plasma Pencil for Biomedical Applications

2014 ◽  
Vol 42 (10) ◽  
pp. 3148-3160 ◽  
Author(s):  
Abdollah Sarani ◽  
Cosmina Nicula ◽  
Xavier F. Gonzales ◽  
Magesh Thiyagarajan
2006 ◽  
Vol 514-516 ◽  
pp. 1005-1009 ◽  
Author(s):  
José V. Araújo ◽  
J.A. Lopes da Silva ◽  
Margarida M. Almeida ◽  
Maria Elisabete V. Costa

Porous chitosan/brushite composite scaffolds were prepared by a freeze-drying technique, starting from brushite suspensions in chitosan solutions. The obtained scaffolds showed a regular macroporous and interconnected structure with brushite particles uniformly distributed in the chitosan matrix. The variation of the brushite concentration affected the microstructure of the final freeze-dried scaffold, in particular, its porosity and its average pore size. The yield strengths of the composite scaffolds could also be improved by the increase of the brushite content.


RSC Advances ◽  
2021 ◽  
Vol 11 (16) ◽  
pp. 9076-9085
Author(s):  
Kanchan Yadav ◽  
Megha Das ◽  
Nurul Hassan ◽  
Archana Mishra ◽  
Jayeeta Lahiri ◽  
...  

A novel nanodot-using protein has been synthesized for the live cell imaging and drug delivery of melatonin in breast cancer cells. Its unique properties hold potential for various biomedical applications in the field of bioimaging and drug delivery.


2011 ◽  
Vol 31 (5) ◽  
pp. 906-914 ◽  
Author(s):  
A. Roguska ◽  
M. Pisarek ◽  
M. Andrzejczuk ◽  
M. Dolata ◽  
M. Lewandowska ◽  
...  

2013 ◽  
Vol 27 (2) ◽  
pp. 216-226 ◽  
Author(s):  
Md. Kamal Khan ◽  
Mohammed Mizanur Rahman ◽  
Bodrun Nesa ◽  
Romana Nasrin ◽  
Swajal Molla ◽  
...  

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1375
Author(s):  
María J. Moreno-Vásquez ◽  
Maribel Plascencia-Jatomea ◽  
Saúl Sánchez-Valdes ◽  
Judith C. Tanori-Córdova ◽  
Francisco J. Castillo-Yañez ◽  
...  

Nanoparticles based on chitosan modified with epigallocatechin gallate (EGCG) were synthetized by nanoprecipitation (EGCG-g-chitosan-P). Chitosan was modified by free-radical-induced grafting, which was verified by Fourier transform infrared (FTIR). Furthermore, the morphology, particle size, polydispersity index, and zeta potential of the nanoparticles were investigated. The grafting degree of EGCG, reactive oxygen species (ROS) production, antibacterial and antioxidant activities of EGCG-g-chitosan-P were evaluated and compared with those of pure EGCG and chitosan nanoparticles (Chitosan-P). FTIR results confirmed the modification of the chitosan with EGCG. The EGCG-g-chitosan-P showed spherical shapes and smoother surfaces than those of Chitosan-P. EGCG content of the grafted chitosan nanoparticles was 330 μg/g. Minimal inhibitory concentration (MIC) of EGCG-g-chitosan-P (15.6 μg/mL) was lower than Chitosan-P (31.2 μg/mL) and EGCG (500 μg/mL) against Pseudomonas fluorescens (p < 0.05). Additionally, EGCG-g-chitosan-P and Chitosan-P presented higher Staphylococcus aureus growth inhibition (100%) than EGCG at the lowest concentration tested. The nanoparticles produced an increase of ROS (p < 0.05) in both bacterial species assayed. Furthermore, EGCG-g-chitosan-P exhibited higher antioxidant activity than that of Chitosan-P (p < 0.05) in 2,2′-azino-bis (3-ethyl-benzothiazoline-6-sulfonic acid) (ABTS), 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and ferric-reducing antioxidant power assays. Based on the above results, EGCG-g-chitosan-P shows the potential for food packaging and biomedical applications.


2021 ◽  
Vol 903 ◽  
pp. 11-16
Author(s):  
M.A. Manjunath ◽  
K. Naveen ◽  
Prakash Vinod ◽  
N. Balashanmugam ◽  
M.R. Shankar

Polymethyl methacrylate (PMMA) is one among few known photo-polymeric resin useful in lithography for fabricating structures having better mechanical properties to meet the requirement in electronics and biomedical applications. This study explores the effect of Photo Initiator (PI) concentration and also curing time on strength and hardness of Polymethyl methacrylate (PMMA) obtained by UV photopolymerization of Methyl methacrylate (MMA) monomer. The UV LED light source operating at the wavelength of 364 nm is used with Benzoin Ethyl Ether (BEE) as photo initiator. The curing of PMMA resin is supported with peltier cooling device placed at the bottom of the UV light source. The characterisation study of UV photo cured PMMA is analysed through nano indenter (Agilent Technologies-G200). The current work investigates the influence of PI concentration and curing time in achieving maximum mechanical properties for UV photopolymerized PMMA.


2021 ◽  
Author(s):  
Hossan Hossan ◽  
Zack Maggard ◽  
Connor Self ◽  
Carlos Palou ◽  
Eileen Hernandez

Sign in / Sign up

Export Citation Format

Share Document