Towards high‐quality peri‐operative care: a global perspective

Abstract Artificial breeding of freshwater pearl mussels is widely used to improve the yield of pearl culture. All phases of the production cycle, including collection and culture of the broodstock, release of the glochidia, provision of the host fish for glochidia to attach to, and collection of mussel seeds, can be controlled artificially. The advantages of artificial breeding are that it can help to produce high quality pearls and improve the genetic quality of pearl mussels. Collected mussel seed are transferred from holding jars into small 200 µm mesh baskets (10 cm diameter x 5 cm). Each basket was supplied individually with 0.1-0.2 L of water per minute. When the mussels' shell length reaches over 10 cm, they can be operated to culture pearl. After post-operative care the implanted mussels are stocked in ponds. The mussels are kept in nylon bags (2 mussels per bag) and are hung from bamboo or PVC pipes and placed in ponds at 1 m depth. Periodical checking of mussels, with removal of dead ones and cleaning of bags, is required throughout the culture period of 12-18 months.

Download Full-text

Pest management in cotton: a global perspective

10.1079/9781800620216.0000 ◽

2022 ◽

Keyword(s):

Integrated Pest Management ◽

Pest Management ◽

Management Strategies ◽

Crop Protection ◽

Global Perspective ◽

High Quality ◽

Current State

Abstract This book contains 14 chapters presenting a global overview of the background to, and the current state of crop protection and pest management in cotton crops. It shows the need for more research to select cotton cultivars with high quality fibres suitable for different cotton growing areas and develop integrated pest management strategies to minimize the use of pesticides.

Download Full-text

Rapid tranquillisation: a global perspective

BJPsych International ◽

10.1192/s2056474000000684 ◽

2015 ◽

Vol 12 (4) ◽

pp. 100-102 ◽

Cited By ~ 3

Author(s):

Pallavi Nadkarni ◽

Mahesh Jayaram ◽

Shailesh Nadkarni ◽

Ranga Rattehalli ◽

Clive E. Adams

Keyword(s):

Randomised Controlled Trials ◽

Healthcare Professionals ◽

Mental Health Problems ◽

Scientific Evidence ◽

Clinical Care ◽

Global Perspective ◽

Controlled Trials ◽

High Quality ◽

Pharmacological Agents ◽

Randomised Controlled

Violence and aggression among patients suffering from mental health problems undoubtedly pose a challenge to healthcare professionals, families and carers. Aggressive behaviours affect all aspects of clinical care. The goal of professionals is to ensure safety while effectively managing behavioural emergencies. ‘Rapid tranquillisation’ implies prescribing pharmacological agents to manage these behaviours. This article highlights changing prescription trends. Appraisal of global guidelines suggests that factors other than scientific evidence dictate their evolution. High-quality randomised controlled trials are needed to develop a global guideline.

Download Full-text

Advocacy in Pain Management: The Role of the Anaesthetic Nurse Specialist

British Journal of Anaesthetic and Recovery Nursing ◽

10.1017/s1742645613000193 ◽

2013 ◽

Vol 14 (3-4) ◽

pp. 43-48 ◽

Cited By ~ 2

Author(s):

G. McLean ◽

D. Martin ◽

A. Cousley ◽

L. Hoy

Keyword(s):

Pain Management ◽

Nursing Practice ◽

Patient Advocacy ◽

Professional Autonomy ◽

Nurse Specialist ◽

High Quality ◽

Operative Care ◽

Specialist Knowledge

AbstractPeri-operative nursing practice is constantly changing and demanding specialist knowledge, skills and expertise to embrace these changes. All patients in need of anaesthesia are entitled to the same high quality peri-operative care and therefore those assisting the anaesthetist must be competent and effective practitioners. With this in mind the authors shall give a reflective account highlighting the role of Anaesthetic Nurse Specialist (ANS) in promoting leadership within the peri-operative environment and how it can be nurtured and facilitated to achieve professional autonomy and promote patient advocacy.

Download Full-text

A supply sided analysis of leading MOOC platforms and universities

Knowledge Management & E-Learning: An International Journal ◽

10.34105/j.kmel.2016.08.011 ◽

2016 ◽

pp. 158-181

Keyword(s):

Online Courses ◽

Quality Education ◽

Global Perspective ◽

Massive Open Online Courses ◽

High Quality ◽

High Quality Education ◽

Leading Role ◽

Promising Strategy ◽

The Uk

Investing in education is generally considered as a promising strategy to fight poverty and increase prosperity. This applies to all levels of an economy reaching from individuals to local communities and countries and has a global perspective as well. However, high-quality education is often costly and not available anytime anywhere. Therefore, any promising concept that might help to democratize education is worth pursuing, in a sense that it makes education accessible for everybody without any restrictions. The characteristics attributed to MOOC – Massive Open Online Courses are promising to contribute to this objective. Hence, our objective is to analyse MOOC as it currently operates. Obviously, there is a huge demand for free high-quality education anytime anywhere but a shortage on the supply side. So, we will concentrate on supply-sided effects and study MOOC platforms as well as content providers, particularly universities. We focus our research on some of the leading platforms and universities worldwide. Relative to their size Australia and the Netherlands are very active players in the MOOC sector. Germany is lagging behind and leading universities in the UK seem to virtually refrain from offering MOOC. Our research also shows the leading role of US universities and platform providers.

Download Full-text

Some problems of objective-prism spectra classification

Symposium - International Astronomical Union ◽

10.1017/s0074180900053183 ◽

1966 ◽

Vol 24 ◽

pp. 51-52

Author(s):

E. K. Kharadze ◽

R. A. Bartaya

Keyword(s):

Short Wave ◽

High Quality ◽

Stellar Spectra ◽

Objective Prism

The unique 70-cm meniscus-type telescope of the Abastumani Astrophysical Observatory supplied with two objective prisms and the seeing conditions characteristic at Mount Kanobili (Abastumani) permit us to obtain stellar spectra of a high quality. No additional design to improve the “climate” immediately around the telescope itself is being applied. The dispersions and photographic magnitude limits are 160 and 660Å/mm, and 12–13, respectively. The short-wave end of spectra reaches 3500–3400Å.

Download Full-text

A non-cyanide method of electropolishing silver

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107873 ◽

1978 ◽

Vol 36 (1) ◽

pp. 146-147

Author(s):

R. L. Lyles ◽

S. J. Rothman ◽

W. Jäger

Keyword(s):

Electron Microscopy ◽

Sulphuric Acid ◽

Methyl Alcohol ◽

Health Hazards ◽

Silver Alloy ◽

High Quality ◽

Silver Alloys ◽

Free Sample ◽

Specimen Quality ◽

Standard Techniques

Standard techniques of electropolishing silver and silver alloys for electron microscopy in most instances have relied on various CN recipes. These methods have been characteristically unsatisfactory due to difficulties in obtaining large electron transparent areas, reproducible results, adequate solution lifetimes, and contamination free sample surfaces. In addition, there are the inherent health hazards associated with the use of CN solutions. Various attempts to develop noncyanic methods of electropolishing specimens for electron microscopy have not been successful in that the specimen quality problems encountered with the CN solutions have also existed in the previously proposed non-cyanic methods.The technique we describe allows us to jet polish high quality silver and silver alloy microscope specimens with consistant reproducibility and without the use of CN salts.The solution is similar to that suggested by Myschoyaev et al. It consists, in order of mixing, 115ml glacial actic acid (CH3CO2H, specific wt 1.04 g/ml), 43ml sulphuric acid (H2SO4, specific wt. g/ml), 350 ml anhydrous methyl alcohol, and 77 g thiourea (NH2CSNH2).

Download Full-text

A High Resolution Scanning Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100101529 ◽

1968 ◽

Vol 26 ◽

pp. 356-357

Author(s):

A. V. Crewe ◽

J. Wall ◽

L. M. Welter

Keyword(s):

High Resolution ◽

Field Emission ◽

Spherical Aberration ◽

Focal Length ◽

Spot Size ◽

Emission Source ◽

Field Of View ◽

Scanning Microscope ◽

Magnetic Lens ◽

High Quality

A scanning microscope using a field emission source has been described elsewhere. This microscope has now been improved by replacing the single magnetic lens with a high quality lens of the type described by Ruska. This lens has a focal length of 1 mm and a spherical aberration coefficient of 0.5 mm. The final spot size, and therefore the microscope resolution, is limited by the aberration of this lens to about 6 Å.The lens has been constructed very carefully, maintaining a tolerance of + 1 μ on all critical surfaces. The gun is prealigned on the lens to form a compact unit. The only mechanical adjustments are those which control the specimen and the tip positions. The microscope can be used in two modes. With the lens off and the gun focused on the specimen, the resolution is 250 Å over an undistorted field of view of 2 mm. With the lens on,the resolution is 20 Å or better over a field of view of 40 microns. The magnification can be accurately varied by attenuating the raster current.

Download Full-text

Quantitative defect studies in semiconductor TEM samples prepared by low angle ion milling

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100138932 ◽

1995 ◽

Vol 53 ◽

pp. 512-513

Author(s):

L. Mulestagno ◽

J.C. Holzer ◽

P. Fraundorf

Keyword(s):

Sample Preparation ◽

Milling Time ◽

High Density ◽

Low Density ◽

Ion Milling ◽

High Quality ◽

Variable Angle ◽

Major Disadvantage ◽

Induced Defects

Due to the wealth of information, both analytical and structural that can be obtained from it TEM always has been a favorite tool for the analysis of process-induced defects in semiconductor wafers. The only major disadvantage has always been, that the volume under study in the TEM is relatively small, making it difficult to locate low density defects, and sample preparation is a somewhat lengthy procedure. This problem has been somewhat alleviated by the availability of efficient low angle milling.Using a PIPS® variable angle ion -mill, manufactured by Gatan, we have been consistently obtaining planar specimens with a high quality thin area in excess of 5 × 104 μm2 in about half an hour (milling time), which has made it possible to locate defects at lower densities, or, for defects of relatively high density, obtain information which is statistically more significant (table 1).

Download Full-text