Combining Virtual Reality and 3D Printed Models to Simulate Patient‐Specific Dental Operative Procedures – A Study Exploring Student Perceptions

Abstract Aims We aim to determine any additional benefit of virtual reality (VR) experience if compared to conventional cross-sectional imaging and standard 3D modelling when deciding on surgical strategy in patients with complex double outlet right ventricle (DORV). Methods and results We retrospectively selected ten consecutive patients with DORV and complex interventricular communications, who underwent biventricular repair. An arterial switch operation (ASO) was part of the repair in three of those. CT or cardiac MRI images were used to reconstruct patient-specific 3D anatomies, which were then presented using different visualisation modalities: 3D pdf, 3D printed models, and VR models. Two experienced paediatric cardiac surgeons, blinded to repair performed, reviewed each case evaluating the suitability of repair following assessment of each visualization modalities. In addition, they had to identify those who had ASO as part of the procedure. Answers of the two surgeons were compared to the actual operations performed. There was no mortality during the follow-up (mean = 2.5 years). Two patients required reoperations. After review of CT/CMR images, the evaluators identified the surgical strategy in accordance with the actual surgical plan in 75% of the cases. When using 3D pdf this reached only 70%. Accordance improved to 85% after revision of 3D printed models and to 95% after VR. Use of 3D printed models and VR facilitated the identification of patients who required ASO. Conclusion VR can enhance understanding of suitability for biventricular repair in patients with complex DORV if compared to cross-sectional images and other 3D modelling techniques.

Download Full-text

CRT-500.06 Computational Prediction of Drug-Eluting Stent Performance in Patient-Specific Arteries: A Virtual Reality

JACC Cardiovascular Interventions ◽

10.1016/j.jcin.2020.01.137 ◽

2020 ◽

Vol 13 (4) ◽

pp. S43-S44

Author(s):

Abraham R. Tzafriri ◽

Farhad Rikhtegar Nezami ◽

Elazer R. Edelman

Keyword(s):

Virtual Reality ◽

Computational Prediction ◽

Patient Specific ◽

Drug Eluting Stent ◽

Drug Eluting

Download Full-text

Quality Control in 3D Printing: Accuracy Analysis of 3D-Printed Models of Patient-Specific Anatomy

Materials ◽

10.3390/ma14041021 ◽

2021 ◽

Vol 14 (4) ◽

pp. 1021

Author(s):

Bernhard Dorweiler ◽

Pia Elisabeth Baqué ◽

Rayan Chaban ◽

Ahmed Ghazy ◽

Oroa Salem

Keyword(s):

Wall Thickness ◽

Large Scale ◽

Fused Deposition Modeling ◽

Vascular Anatomy ◽

3D Models ◽

Patient Specific ◽

Stl File ◽

Fused Deposition ◽

3D Printed ◽

The Mean

As comparative data on the precision of 3D-printed anatomical models are sparse, the aim of this study was to evaluate the accuracy of 3D-printed models of vascular anatomy generated by two commonly used printing technologies. Thirty-five 3D models of large (aortic, wall thickness of 2 mm, n = 30) and small (coronary, wall thickness of 1.25 mm, n = 5) vessels printed with fused deposition modeling (FDM) (rigid, n = 20) and PolyJet (flexible, n = 15) technology were subjected to high-resolution CT scans. From the resulting DICOM (Digital Imaging and Communications in Medicine) dataset, an STL file was generated and wall thickness as well as surface congruency were compared with the original STL file using dedicated 3D engineering software. The mean wall thickness for the large-scale aortic models was 2.11 µm (+5%), and 1.26 µm (+0.8%) for the coronary models, resulting in an overall mean wall thickness of +5% for all 35 3D models when compared to the original STL file. The mean surface deviation was found to be +120 µm for all models, with +100 µm for the aortic and +180 µm for the coronary 3D models, respectively. Both printing technologies were found to conform with the currently set standards of accuracy (<1 mm), demonstrating that accurate 3D models of large and small vessel anatomy can be generated by both FDM and PolyJet printing technology using rigid and flexible polymers.

Download Full-text

Total Meniscus Reconstruction Using a Polymeric Hybrid-Scaffold: Combined with 3D-Printed Biomimetic Framework and Micro-Particle

Polymers ◽

10.3390/polym13121910 ◽

2021 ◽

Vol 13 (12) ◽

pp. 1910

Author(s):

Hun-Jin Jeong ◽

Se-Won Lee ◽

Myoung Wha Hong ◽

Young Yul Kim ◽

Kyoung Duck Seo ◽

...

Keyword(s):

Shape Matching ◽

Femoral Condyle ◽

Immunohistochemical Analysis ◽

Cartilage Degeneration ◽

Patient Specific ◽

Hybrid Scaffold ◽

Meniscus Tissue ◽

Cell Source ◽

3D Printed ◽

Meniscus Regeneration

The meniscus has poor intrinsic regenerative capability, and its injury inevitably leads to articular cartilage degeneration. Although there are commercialized off-the-shelf alternatives to achieve total meniscus regeneration, each has its own shortcomings such as individualized size matching issues and inappropriate mechanical properties. We manufactured a polycaprolactone-based patient-specific designed framework via a Computed Tomography scan images and 3D-printing technique. Then, we completed the hybrid-scaffold by combining the 3D-printed framework and mixture micro-size composite which consists of polycaprolactone and sodium chloride to create a cell-friendly microenvironment. Based on this hybrid-scaffold with an autograft cell source (fibrochondrocyte), we assessed mechanical and histological results using the rabbit total meniscectomy model. At postoperative 12-week, hybrid-scaffold achieved neo-meniscus tissue formation, and its shape was maintained without rupture or break away from the knee joint. Histological and immunohistochemical analysis results showed obvious ingrowth of the fibroblast-like cells and chondrocyte cells as well as mature lacunae that were embedded in the extracellular matrix. Hybrid-scaffolding resulted in superior shape matching as compared to original meniscus tissue. Histological analysis showed evidence of extensive neo-meniscus cell ingrowth. Additionally, the hybrid-scaffold did not induce osteoarthritis on the femoral condyle surface. The 3D-printed hybrid-scaffold may provide a promising approach that can be applied to those who received total meniscal resection, using patient-specific design and autogenous cell source.

Download Full-text

Minimally Invasive Mini-orbitozygomatic Approach for Clipping an Anterior Communicating Artery Aneurysm: Virtual Reality Surgical Planning

Arquivos Brasileiros de Neurocirurgia Brazilian Neurosurgery ◽

10.1055/s-0040-1719004 ◽

2020 ◽

Author(s):

Nicolás González Romo ◽

Franco Ravera Zunino

Keyword(s):

Virtual Reality ◽

Minimally Invasive ◽

Surgical Planning ◽

Artery Aneurysm ◽

Patient Specific ◽

Anterior Communicating Artery ◽

Imaging Data ◽

Advantages And Disadvantages ◽

Orbitozygomatic Approach ◽

Skull Base Anatomy

AbstractVirtual reality (VR) has increasingly been implemented in neurosurgical practice. A patient with an unruptured anterior communicating artery (AcoA) aneurysm was referred to our institution. Imaging data from computed tomography angiography (CTA) was used to create a patient specific 3D model of vascular and skull base anatomy, and then processed to a VR compatible environment. Minimally invasive approaches (mini-pterional, supraorbital and mini-orbitozygomatic) were simulated and assessed for adequate vascular exposure in VR. Using an eyebrow approach, a mini-orbitozygomatic approach was performed, with clip exclusion of the aneurysm from the circulation. The step-by-step process of VR planning is outlined, and the advantages and disadvantages for the neurosurgeon of this technology are reviewed.

Download Full-text

Design, Fabrication, and Accuracy of a Novel Noncovering Lock-Mechanism Bilateral Patient-Specific Drill Guide Template for Nondeformed and Deformed Thoracic Spines

HSS Journal ® ◽

10.1177/1556331621996331 ◽

2021 ◽

pp. 155633162199633

Author(s):

Mehran Ashouri-Sanjani ◽

Shima Mohammadi-Moghadam ◽

Parisa Azimi ◽

Navid Arjmand

Keyword(s):

Thoracic Spine ◽

Sagittal Plane ◽

Ct Scanning ◽

Entry Point ◽

In Vivo Studies ◽

Patient Specific ◽

Plane Angle ◽

Severe Scoliosis ◽

3D Printed

Background: Pedicle screw (PS) placement has been widely used in fusion surgeries on the thoracic spine. Achieving cost-effective yet accurate placements through nonradiation techniques remains challenging. Questions/Purposes: Novel noncovering lock-mechanism bilateral vertebra-specific drill guides for PS placement were designed/fabricated, and their accuracy for both nondeformed and deformed thoracic spines was tested. Methods: One nondeformed and 1 severe scoliosis human thoracic spine underwent computed tomographic (CT) scanning, and 2 identical proportions of each were 3-dimensional (3D) printed. Pedicle-specific optimal (no perforation) drilling trajectories were determined on the CT images based on the entry point/orientation/diameter/length of each PS. Vertebra-specific templates were designed and 3D printed, assuring minimal yet firm contacts with the vertebrae through a noncovering lock mechanism. One model of each patient was drilled using the freehand and one using the template guides (96 pedicle drillings). Postoperative CT scans from the models with the inserted PSs were obtained and superimposed on the preoperative planned models to evaluate deviations of the PSs. Results: All templates fitted their corresponding vertebra during the simulated operations. As compared with the freehand approach, PS placement deviations from their preplanned positions were significantly reduced: for the nonscoliosis model, from 2.4 to 0.9 mm for the entry point, 5.0° to 3.3° for the transverse plane angle, 7.1° to 2.2° for the sagittal plane angle, and 8.5° to 4.1° for the 3D angle, improving the success rate from 71.7% to 93.5%. Conclusions: These guides are valuable, as the accurate PS trajectory could be customized preoperatively to match the patients’ unique anatomy. In vivo studies will be required to validate this approach.

Download Full-text

3D‐printed, patient‐specific intracranial aneurysm models: From clinical data to flow experiments with endovascular devices

Medical Physics ◽

10.1002/mp.14714 ◽

2021 ◽

Author(s):

Mariya S. Pravdivtseva ◽

Eva Peschke ◽

Thomas Lindner ◽

Fritz Wodarg ◽

Johannes Hensler ◽

...

Keyword(s):

Intracranial Aneurysm ◽

Clinical Data ◽

Patient Specific ◽

3D Printed ◽

Flow Experiments ◽

Endovascular Devices

Download Full-text

Custom, spray coated receive coils for magnetic resonance imaging

Scientific Reports ◽

10.1038/s41598-021-81833-0 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

A. M. Zamarayeva ◽

K. Gopalan ◽

J. R. Corea ◽

M. Z. Liu ◽

K. Pang ◽

...

Keyword(s):

Magnetic Resonance Imaging ◽

Magnetic Resonance ◽

Silver Nanoparticle ◽

Material Selection ◽

Spray Deposition ◽

Dielectric Materials ◽

Patient Specific ◽

High Signal ◽

Resonance Imaging ◽

3D Printed

AbstractWe have developed a process for fabricating patient specific Magnetic Resonance Imaging (MRI) Radio-frequency (RF) receive coil arrays using additive manufacturing. Our process involves spray deposition of silver nanoparticle inks and dielectric materials onto 3D printed substrates to form high-quality resonant circuits. In this paper, we describe the material selection and characterization, process optimization, and design and testing of a prototype 4-channel neck array for carotid imaging. We show that sprayed polystyrene can form a low loss dielectric layer in a parallel plate capacitor. We also demonstrate that by using sprayed silver nanoparticle ink as conductive traces, our devices are still dominated by sample noise, rather than material losses. These results are critical for maintaining high Signal-to-Noise-Ratio (SNR) in clinical settings. Finally, our prototype patient specific coil array exhibits higher SNR (5 × in the periphery, 1.4 × in the center) than a commercially available array designed to fit the majority of subjects when tested on our custom neck phantom. 3D printed substrates ensure an optimum fit to complex body parts, improve diagnostic image quality, and enable reproducible placement on subjects.

Download Full-text