scholarly journals Evaluation of Mechanical Parameters of Pellets

2016 ◽  
Vol 64 (5) ◽  
pp. 1593-1601
Author(s):  
Ľubomír Kubík ◽  
František Adamovský ◽  
Viera Kažimírová
Keyword(s):  
Wheat Straw ◽  
Initial Stress ◽  
Modulus Of Elasticity ◽  
Compressive Loading ◽  
Mean Value ◽  
Mechanical Parameters ◽  
Mean Values ◽  
Rapeseed Straw ◽  
Strain Stress ◽  
Initial Force

The paper dealt with the evaluation of mechanical properties of the cylinder wheat straw, rapeseed straw and 50/50 % mixed wheat and rapeseed straw pellet samples. The pellets were made by the granulating machine MGL 200 (Kovonovak). The compressive loading curves of dependencies of stress on strain were realised by the test stand Andilog Stentor 1000 (Andilog Technologies, Vitrolles, France). Certain mechanical parameters were determined, namely the initial force (force at 10 % of compress strain), force in maximum of loading curve, strain in maximum of loading curve, initial stress (stress at 10 % of compression strain), stress in maximum of loading curve and modulus of elasticity. Mean value of the initial force was maximal for mixed straw pellet samples 52.49 N. Mean values of the initial force of the wheat straw samples and the rapeseed straw samples were smaller and almost identical 43.58 N and 43.12 N. Mean values of the initial stress of loading curve, of the wheat straw samples reached 1.46 MPa, the rapeseed straw samples reached value 1.40 MPa and the mixed straw samples reached value 1.63 MPa. Mean value of the force in maximum of loading curve was also maximal for mixed straw pellet samples 213.26 N. Mean values of the force in maximum of loading curve of the wheat straw samples reached 178.11 N. The rapeseed straw samples reached value 95.95 N and the mixed straw samples reached value 213.26 N. Mean values of the stress in maximum of loading curve, of the wheat straw samples reached 5.93 MPa, the rapeseed straw samples reached value 3.11 MPa and the mixed straw samples reached value 7.10 MPa Mean values of the modulus of elasticity, of the wheat straw samples reached 18.27 MPa, the rapeseed straw samples reached value 13.08 MPa and the mixed straw samples reached value 14.97 MPa. Significant correlations of the mechanical parameters pellet samples were observed among initial force and initial stress and modulus of elasticity. Significant correlations of force in maximum with stress and strain in the maximum were observed.

Physical properties and compression loading behaviour of corn seed

2013 ◽  
Vol 27 (2) ◽  
pp. 119-126 ◽  
Author(s):  
Lj. Babić ◽  
M. Radojèin ◽  
I. Pavkov ◽  
M. Babić ◽  
J. Turan ◽  
...  
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Modulus Of Elasticity ◽  
Compressive Loading ◽  
Secant Modulus ◽  
Seed Moisture Content ◽  
Mean Values ◽  
Compression Loading ◽  
Corn Seed ◽  
Dent Corn

Abstract The aim of this study was to acquire data on the physical properties and compression loading behaviour of seed of six corn hybrid varieties. The mean values of length, width, thickness, geometric diameter, surface area, porosity, single kernel mass, sphericity, bulk and true density, 1 000 kernelmass and coefficient of friction were studied at single level of corn seed moisture content. The calculated secant modulus of elasticity during compressive loading for dent corn was 0.995 times that of the semi-flint type; there were no significant differences in the value of this mechanical property between semi-flint and dent corn varieties. The linear model showed a decreasing tendency of secant modulus of elasticity for all hybrids as the moisture content of seeds increased.

scholarly journals Mechanical properties of pellets in compression

2016 ◽  
Vol 61 (Special Issue) ◽  
pp. S1-S8 ◽  
Author(s):  
Ľ. Kubík ◽  
V. Kažimírová
Keyword(s):  
Mechanical Properties ◽  
Modulus Of Elasticity ◽  
Compressive Loading ◽  
Strain Curve ◽  
Stress And Strain ◽  
Sample Length ◽  
Maximum Point ◽  
Mechanical Parameters ◽  
Compression Force ◽  
Production Engineering

The paper deals with the evaluation of mechanical properties of the cylinder pellet samples. The pellets were made from hay by the granulating machine MGL 200 (Kovonovak) provided by the Department of Production Engineering, Slovak University of Agriculture in Nitra. The pellets were submitted to compressive loading. The compressive loading curves of dependencies of force on strain and force on time were realised by the test stand Andilog Stentor 1000. Certain mechanical parameters were determined, namely the diameter of the sample, length of the sample, force at 10% of strain, force in the first maximum of the force – strain curve, strain in the first maximum of the force – strain curve, modulus of elasticity, force in the inflex point of the force – time and force – strain curves and strain and stress in the inflex point of the force – time and force – strain curves. Significant correlations of the mechanical parameters were observed between the inflex point and the first maximum point of the loading curves. There were find out, the compression force, stress and strain in the inflex point significantly correlate with the force, stress and strain in the first maximum.

Seasonal trends in the stable isotopic composition of snow and meltwater runoff in a subarctic catchment at Okstindan, Norway

2004 ◽  
Vol 35 (2) ◽  
pp. 119-137 ◽  
Author(s):  
S.D. Gurney ◽  
D.S.L. Lawrence
Keyword(s):  
Isotopic Composition ◽  
Mean Value ◽  
Mean Values ◽  
Stable Isotopic Composition ◽  
Meltwater Runoff ◽  
Stable Isotopic ◽  
The Mean ◽  
The Difference ◽  
Δ18o And Δd

Seasonal variations in the stable isotopic composition of snow and meltwater were investigated in a sub-arctic, mountainous, but non-glacial, catchment at Okstindan in northern Norway based on analyses of δ18O and δD. Samples were collected during four field periods (August 1998; April 1999; June 1999 and August 1999) at three sites lying on an altitudinal transect (740–970 m a.s.l.). Snowpack data display an increase in the mean values of δ18O (increasing from a mean value of −13.51 to −11.49‰ between April and August), as well as a decrease in variability through the melt period. Comparison with a regional meteoric water line indicates that the slope of the δ18O–δD line for the snowpacks decreases over the same period, dropping from 7.49 to approximately 6.2.This change points to the role of evaporation in snowpack ablation and is confirmed by the vertical profile of deuterium excess. Snowpack seepage data, although limited, also suggest reduced values of δD, as might be associated with local evaporation during meltwater generation. In general, meltwaters were depleted in δ18O relative to the source snowpack at the peak of the melt (June), but later in the year (August) the difference between the two was not statistically significant. The diurnal pattern of isotopic composition indicates that the most depleted meltwaters coincide with the peak in temperature and, hence, meltwater production.

A new simpler approach to measure the strength of toe plantar flexion requiring no mechanical restraint with a light-weight device

2021 ◽  
pp. 095441192110029
Author(s):  
Yuko Komuro ◽  
Yuji Ohta
Keyword(s):  
Plantar Flexion ◽  
Mean Value ◽  
Simple Approach ◽  
Light Weight ◽  
New Approach ◽  
Mean Values ◽  
Mechanical Restraint ◽  
Significant Difference ◽  
Ankle Joints ◽  
The Mean

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.

scholarly journals Applying MRI Intensity Normalization on Non-Bone Tissues to Facilitate Pseudo-CT Synthesis from MRI

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 816
Author(s):  
Kuei-Yuan Hou ◽  
Hao-Yuan Lu ◽  
Ching-Ching Yang
Keyword(s):  
Mean Value ◽  
Tissue Type ◽  
Routine Practice ◽  
Intensity Level ◽  
Mean Values ◽  
Conversion Model ◽  
Ratio Image ◽  
Abdominal Mri ◽  
High Level ◽  
Intensity Normalization

This study aimed to facilitate pseudo-CT synthesis from MRI by normalizing MRI intensity of the same tissue type to a similar intensity level. MRI intensity normalization was conducted through dividing MRI by a shading map, which is a smoothed ratio image between MRI and a three-intensity mask. Regarding pseudo-CT synthesis from MRI, a conversion model based on a three-layer convolutional neural network was trained and validated. Before MRI intensity normalization, the mean value ± standard deviation of fat tissue in 0.35 T chest MRI was 297 ± 73 (coefficient of variation (CV) = 24.58%), which was 533 ± 91 (CV = 17.07%) in 1.5 T abdominal MRI. The corresponding results were 149 ± 32 (CV = 21.48%) and 148 ± 28 (CV = 18.92%) after intensity normalization. With regards to pseudo-CT synthesis from MRI, the differences in mean values between pseudo-CT and real CT were 3, 15, and 12 HU for soft tissue, fat, and lung/air in 0.35 T chest imaging, respectively, while the corresponding results were 3, 14, and 15 HU in 1.5 T abdominal imaging. Overall, the proposed workflow is reliable in pseudo-CT synthesis from MRI and is more practicable in clinical routine practice compared with deep learning methods, which demand a high level of resources for building a conversion model.

scholarly journals Intestinal Microbial Ecology and Fillet Metal Chemistry of Wild Grey Mullets Reflect the Variability of the Aquatic Environment in a Western Mediterranean Coastal Lagoon (Santa Giusta, Sardinia, Italy)

Water ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 879
Author(s):  
Rosanna Floris ◽  
Gabriele Sanna ◽  
Cecilia Teodora Satta ◽  
Carlo Piga ◽  
Francesco Sanna ◽  
...  
Keyword(s):  
Intestinal Microbiota ◽  
Environmental Variability ◽  
Heterotrophic Bacteria ◽  
Active Role ◽  
Fish Muscle ◽  
Mean Value ◽  
Western Mediterranean ◽  
Mean Values ◽  
Abiotic And Biotic Factors ◽  
Grey Mullets

Fish populations play an active role in the maintenance of aquatic ecosystems biodiversity. Their intestinal microbiota and fillet chemistry depend on abiotic and biotic factors of the water environments that they inhabit. The present study investigated the grey mullets’ gut microbiota from a transitional aquatic ecosystem (Santa Giusta Lagoon, Sardinia, Italy) by a multidisciplinary approach which refers the results of (1) gut cultivable microbiota analyses (MA), (2) the trace metal assessment of fish muscle (TM), (3) the physico-chemical water monitoring (PC). MA detected the greatest number of total aerobic heterotrophic bacteria, Enterobacteriaceae and coliforms in Autumn (mean values 1.3 × 105, 2.4 × 104, 1.1 × 104 cfu g−1, respectively) when the accumulated rain and mean values of nutrients (reactive phosphorous and silica) were the highest. Marine bacteria were more numerous in Summer (mean value 7.4 × 105 cfu g−1) when the highest mean values of water temperature and salinity were registered. The gut bacteria were identified as Pseudomonas spp. (64%), Aeromonas spp. (17%), Ochrobactrum pseudogrignonense (10%), Providencia spp. (5%), Enterobacter ludwigii (2%) and Kocuria tytonicola (2%). TM showed that Ca, Na, B and Ni increased their concentrations in Winter while maxima of P, Zn, Cu and Fe were found in muscles of fish sampled in Summer. This study highlighted that the fish intestinal microbiota and metal composition of the fillet reflected the seasonal aquatic environmental variability.

The availability of copper to grazing ruminants in parts of North Yorkshire

1978 ◽  
Vol 91 (1) ◽  
pp. 13-16 ◽  
Author(s):  
D. I. Givens ◽  
J. R. Hopkins
Keyword(s):  
Mean Value ◽  
Mean Values ◽  
Total Sulphur ◽  
History Of ◽  
Relationship Of

SummaryA total of 225 herbage samples were taken from two areas with a history of bovine hypocupraemia and examined for their Cu, Mo, total S, Zn, Fe and Cd content.In general, the concentrations of Cu and Mo (mean values 10·4 and 1·6 mg/kgD.M. respectively) were normal, as were those of Zn, Fe and Cd (mean values 43, 255 and 0–59 mg/kg D.M. respectively). The total S concentrations (mean value 3·5 g/kg D.M.) were, however, higher than found by some other workers.The concentrations of available herbage Cu were calculated using the following relationship of Suttle & McLauchlan (1976):logTA Cu = –0·0019 Mo–0·0755 S–0·0131 Mo × S–1·153,where TA Cu is the true availability of Cu, and Mo and total sulphur (S) are dietary concentrations as mg/kg D.M. and g/kg D.M. respectively. Animal requirements for available Cu were derived from estimates of the factorial Cu requirements of various classes of livestock, and when these were compared with the calculated concentrations of available Cu in the herbage they provided a possible explanation for the widespread hypocupraemia experienced in these areas.

scholarly journals AB0101 THE IMPACT OF TIME SPAN TO ACHIEVE BOOLEAN REMISSION FOR MAINTAINING DISEASE ACTIVITY AFTER ACQUISITION IN RHEUMATOID ARTHRITIS PATIENT

2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 1079.1-1079
Author(s):  
I. Yoshii
Keyword(s):  
Rheumatoid Arthritis ◽  
Disease Activity ◽  
Disease Duration ◽  
Remission Rate ◽  
Mean Value ◽  
Time Span ◽  
Mean Values ◽  
The Mean ◽  
The Relationship

Background:Boolean remission criteria is one most popular and stringent criteria in treating patient with rheumatoid arthritis (RA), because it may guarantees a stable clinical course after attaining remission.Objectives:Impact of time span from initiation to achieving Boolean remission on maintaining disease activity, daily activities, and quality of life after attaining Boolean remission was investigated from daily clinical practice data.Methods:685 patients with RA since August 2010 under the T2T strategy were treated. They were monitored for their TJC, SJC, PGA, EGA, CRP, and disease activity indices such as CDAI, SDAI, DAS28, and Boolean criteria at every visit. HAQ-DI score, pain score using visual analog scale (PS-VAS), and EQ-5D were also monitored, and the quality of life score (QOLS) calculated from EQ-5D was determined at every visit from the time of diagnosis (baseline).Of 685 patients, 465 patients had achieved Boolean remission >1 times, and were consecutively followed up for >3 years. These patients were enrolled in the study. Time span from the first visit to first Boolean remission was calculated. The relationship between the time span and each of background parameters, and the relationship between the time span and each of the mean values of the SDAI score, HAQ score, PS-VAS, SHS, and QOLS at the first Boolean remission and thereafter was evaluated statistically.Patients were subsequently divided into the G ≤ 6 and G > 6 groups based on the achievement of first Boolean remission within two groups: time span G ≤ 6 months and G > 6 months. The two groups were compared with regard to the SDAI score, HAQ score, PS-VAS, SHS, and QOLS at first visit and at the time of first Boolean remission, and the mean values of these parameters after remission were evaluated statistically. Moreover, changes of these parameters and the mean Boolean remission rate after the first remission, and SDAI remission rate at the first Boolean remission to thereafter were compared between the two groups statistically.Results:Out of 465 patients, females comprised 343 (73.7%), and the mean age was 67.8 years (range, from 21–95 years). The mean disease duration at first visit was 6.1 years (range, from 1 months–45 years). The mean follow up length was 88.1 months (range: 36–122 months; median: 85 months) and mean time span from the first visit to the first Boolean remission was 8.1 months. The mean SDAI score, HAQ score, PS-VAS, and the QOLS at first visit were 13.3, 0.467, 33.2, and 0.834, respectively. Among the study parameters, PS-VAS and QOLS were significantly correlated with the time span. For parameters at the first Boolean remission, HAQ-DI score, PS-VAS, and QOLS demonstrated significant correlation with the time span, whereas SDAI, HAQ-DI score, PS-VAS, SHS, and QOLS after the Boolean remission demonstrated significant correlation with the time span.The comparison between the G ≤ 6 and the G > 6 groups revealed that the disease duration, HAQ score, and PS-VAS at baseline in the G > 6 were significantly higher than that in the G ≤ 6 group, and QOLS in the G ≤ 6 group was significantly higher than that in the G > 6 group at baseline. Similarly, the HAQ score and PS-VAS at the first Boolean remission in the G > 6 group were significantly higher than that in the G ≤ 6 group, whereas QOLS in the G ≤ 6 group demonstrated no significant difference compared with that in the G > 6 group.The mean value of the SDAI score after the first Boolean remission in the G > 6 group was significantly higher than that in the G ≤ 6 group. Similarly, the SDAI score, HAQ score, and PS-VAS after the first Boolean remission in the G > 6 group were also significantly higher than those in the G ≤ 6 group, and the mean value of the QOLS in the G ≤ 6 group were significantly higher than that in the G > 6 group. The Boolean remission rate and SDAI remission rate after the first Boolean remission were significantly higher in the G ≤ 6 group than those in the G > 6 group.Conclusion:Attaining Boolean remission ≤ 6 months for RA has significant benefit for more stable disease control, that leads good maintenance of ADL.Disclosure of Interests:None declared

Accuracy of Orthodontic Force and Tooth Movement Measurements

1996 ◽  
Vol 23 (3) ◽  
pp. 241-248 ◽  
Author(s):  
Dan Lundgren ◽  
Py Owman-Moll ◽  
Jüri Kurol ◽  
Birgit Mårtensson
Keyword(s):  
Tooth Movement ◽  
Mean Value ◽  
Measurement Methods ◽  
Calibration Data ◽  
Force Measurements ◽  
Accuracy Of Measurement ◽  
Measuring Machine ◽  
Initial Force ◽  
Level Of Agreement

This study was designed to test the accuracy of measurement methods for assessment of force and tooth movement in orthodontic procedures. Daily in vivo measurements of the force produced by activated archwires showed that the initial force declined substantially (by 20 per cent of mean value) within 3 days. Both the ‘trueness’ (validity) and precision of the force measurements, obtained with a strain gauge, were found to be high (SD values were 1·0 cN and 0·4 cN, respectively). Horizontal tooth movements were measured with three different instruments: a slide calliper, a co-ordinate measuring machine, and laser measuring equipment based on holograms. There was a good level of agreement between these methods. This was also confirmed by calibration data. The precision of the methods was (SD values) 0·06, 0·07, and 0·13 mm, respectively. The benefits of the use of the co-ordinate measuring machine are obvious, since it can measure tooth movements in relation to reference planes in all directions.

Sign in / Sign up

Export Citation Format

Share Document