scholarly journals Additive Manufacturing for Serial Production of High-Performance Metal Parts

2019 ◽  
Vol 141 (05) ◽  
pp. 49-50
Author(s):  
Markus Siebold
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
High Performance ◽  
Layer By Layer ◽  
Laser Melting ◽  
Serial Production ◽  
Key Technology ◽  
Metal Parts ◽  
Solid Objects ◽  
Cad Models

Additive manufacturing (AM) is a process that builds parts layer-by-layer from sliced CAD models to form solid objects. Just a few years ago, 3D printing was primarily used for rapid prototyping. Due to improvements in performance, AM has the potential to become a new key technology for serial production. Innovative advances like selective laser melting (SLM) enable the manufacture of high-performance metal parts. Modern printers contain several lasers, which enables the production of multiple parts at the same time. AM includes much more than just 3D printing: It’s an end-to-end process, from design and simulation to 3D printing to post-processing.

scholarly journals STUDIES ON MASK-LESS ELECTROCHEMICAL ADDITIVE MANUFACTURING

2021 ◽  
Author(s):  
Abhishek Bhardwaj
Keyword(s):  
Additive Manufacturing ◽  
High Power ◽  
Room Temperature ◽  
Three Dimensional ◽  
High Impact ◽  
Layer By Layer ◽  
Metal Parts ◽  
3D Cad ◽  
Cad Models

<div>Added substance Manufacturing (AM) of metallic designs is a warm cycle of layer by layer metal added substance fabricating measure produces parts straightforwardly from 3D CAD models. In this assembling interaction confined electrochemical affidavit joins with the added substance producing technique to make metal parts at room temperature. In this paper, the attainability of Mask-less Electrochemical Additive Manufacturing (ECAM), as a non-warm interaction is considered. Layer by layer testimony has been finished utilizing the electrochemical tips to make nickel microstructures. All the while beat wave qualities and their impacts on affidavit have been considered. </div><div>Confined electrodeposition (LED) was investigated as an AM the interaction with high power over measure boundaries and yield boundaries. The confinement of electrodeposition is completed by utilizing Ultra microelectrodes (UME) and low tossing power electrolytes. Variety in some cycle boundaries, for example, voltage and terminal hole are found to have a high impact on yield boundaries like thickness. The reproductions can anticipate the yield width of affidavit of analyses with a blunder of 8- 30%, so it can possibly apply as an added substance-producing strategy of complex three-dimensional (3D) parts on the microscale.</div>

Where Is the Missing Matter?

3D Printing ◽  
2017 ◽  
pp. 145-152
Author(s):  
Tihomir Mitev
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Industrial Revolution ◽  
Raw Materials ◽  
New Technology ◽  
Three Dimensional ◽  
Material Object ◽  
Layer By Layer ◽  
Solid Objects ◽  
Thing In Itself

The additive manufacturing (or the popular 3D printing) is relatively new technology which opens new spaces for entrepreneurial imagination and promises next stage of the industrial revolution. It is creating three dimensional solid objects from a digital file. The printer transforms the file into a material object layer by layer, using different raw materials. Today, the additive manufacturing is successfully used in architecture, medicine and healthcare, light and heavy industries, education, etc. The paper analyses the roles of actors in manufacturing the objects. It starts with the Heideggerian questioning of technology (), searching for the causes of bringing into appearance of the 3D model. According to Heideggerian analysis the technology is represented as an ‘unveiling of the truth'. The paper suggests that the old understanding of matter as a thing-in-itself should be replaced by a new, flexible, fluid, concept of matter, which is more or less manipulable. The matter is no more an occasion for object's taking place. On the other hand, it seems 3D printing technology is reduced to mere means; a simple intermediary, a copier of ideas. From that perspective the paper questioning the problem of action in ANT and search how action and interaction is distributed and how actors constitutes themselves as well as their actor-world.

Where is the Missing Matter?

2015 ◽  
Vol 7 (1) ◽  
pp. 10-17 ◽  
Author(s):  
Tihomir Mitev
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Industrial Revolution ◽  
Raw Materials ◽  
New Technology ◽  
Three Dimensional ◽  
Material Object ◽  
Layer By Layer ◽  
Solid Objects ◽  
Thing In Itself

The additive manufacturing (or the popular 3D printing) is relatively new technology which opens new spaces for entrepreneurial imagination and promises next stage of the industrial revolution. It is creating three dimensional solid objects from a digital file. The printer transforms the file into a material object layer by layer, using different raw materials. Today, the additive manufacturing is successfully used in architecture, medicine and healthcare, light and heavy industries, education, etc. The paper analyses the roles of actors in manufacturing the objects. It starts with the Heideggerian questioning of technology (), searching for the causes of bringing into appearance of the 3D model. According to Heideggerian analysis the technology is represented as an ‘unveiling of the truth'. The paper suggests that the old understanding of matter as a thing-in-itself should be replaced by a new, flexible, fluid, concept of matter, which is more or less manipulable. The matter is no more an occasion for object's taking place. On the other hand, it seems 3D printing technology is reduced to mere means; a simple intermediary, a copier of ideas. From that perspective the paper questioning the problem of action in ANT and search how action and interaction is distributed and how actors constitutes themselves as well as their actor-world.

scholarly journals STUDIES ON MASK-LESS ELECTROCHEMICAL ADDITIVE MANUFACTURING

2021 ◽  
Author(s):  
Abhishek Bhardwaj
Keyword(s):  
Additive Manufacturing ◽  
High Power ◽  
Room Temperature ◽  
Three Dimensional ◽  
High Impact ◽  
Layer By Layer ◽  
Metal Parts ◽  
3D Cad ◽  
Cad Models

<div>Added substance Manufacturing (AM) of metallic designs is a warm cycle of layer by layer metal added substance fabricating measure produces parts straightforwardly from 3D CAD models. In this assembling interaction confined electrochemical affidavit joins with the added substance producing technique to make metal parts at room temperature. In this paper, the attainability of Mask-less Electrochemical Additive Manufacturing (ECAM), as a non-warm interaction is considered. Layer by layer testimony has been finished utilizing the electrochemical tips to make nickel microstructures. All the while beat wave qualities and their impacts on affidavit have been considered. </div><div>Confined electrodeposition (LED) was investigated as an AM the interaction with high power over measure boundaries and yield boundaries. The confinement of electrodeposition is completed by utilizing Ultra microelectrodes (UME) and low tossing power electrolytes. Variety in some cycle boundaries, for example, voltage and terminal hole are found to have a high impact on yield boundaries like thickness. The reproductions can anticipate the yield width of affidavit of analyses with a blunder of 8- 30%, so it can possibly apply as an added substance-producing strategy of complex three-dimensional (3D) parts on the microscale.</div>

Basis für den industriellen 3D-Druck in Stahl/Basics for industrial 3D printing for steel - Contribution to additive manufacturing of complex products in multi-variant and functional skeleton construction

2017 ◽  
Vol 107 (06) ◽  
pp. 415-419
Author(s):  
M. Hillebrecht ◽  
V. Uhlenwinkel ◽  
A. von Hehl ◽  
H. Zapf ◽  
B. Schob
Keyword(s):  
Additive Manufacturing ◽  
Functional Integration ◽  
Complex Geometries ◽  
Layer By Layer ◽  
Laser Additive Manufacturing ◽  
Complex Products ◽  
Metal Parts ◽  
Laser Joining ◽  
Automation Technology ◽  
Selection Of

Mithilfe laserbasierter generativer Fertigungsverfahren (Laser Additive Manufacturing – LAM) ist es möglich, potentiell komplexe Bauteilgeometrien variantenreich herzustellen. Damit kann Gewicht eingespart werden und Funktionen sind integrierbar. In Kombination mit Automatisierungs- und innovativer Lasertechnik in der Schweiß- und Schneidapplikation lässt sich dieser Prozess wirtschaftlich nutzen. Durch pulverbettbasierte Lasergenerierverfahren können metallische Bauteile schichtweise aufgebaut werden, jedoch ist die Auswahl der Werkstoffe limitiert. Im Forschungsprojekt StaVari (Additive Fertigungsprozesse für komplexe Produkte in variantenreicher und hochfunktionaler Stahlbauweisen) vereinen sich die neuesten Erkenntnisse in Material-, Laser-, Füge- und Automatisierungstechnik, um modernen Anforderungen der Automobilbranche in der Massenfertigung sowie bei der Medizintechnik in der Kleinserie gerecht zu werden. &nbsp; Laser Additive Manufacturing LAM has the potential to generate complex geometries. Through this weight reduction, functional integration and multi-variant production is possible. In combination with automation and innovative laser technology applicated in welding and cutting, this process can be used economically. With powderbed based laser additive manufacturing metal parts can be built up layer by layer. However selection of available metals is limited. In the project StaVari latest findings in material-, laser-, joining and automation technology are joint by qualified partners to meet modern automotive demands in mass production and medicine technology for small batch series.

scholarly journals A Review on Development of Bio-Inspired Implants Using 3D Printing

Biomimetics ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 65
Author(s):  
Ansheed A. Raheem ◽  
Pearlin Hameed ◽  
Ruban Whenish ◽  
Renold S. Elsen ◽  
Aswin G ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Layer By Layer ◽  
Medical Implants ◽  
3D Print ◽  
Metal Implants ◽  
Natural Tissue ◽  
And Control ◽  
Natural Architecture ◽  
Fine Tune

Biomimetics is an emerging field of science that adapts the working principles from nature to fine-tune the engineering design aspects to mimic biological structure and functions. The application mainly focuses on the development of medical implants for hard and soft tissue replacements. Additive manufacturing or 3D printing is an established processing norm with a superior resolution and control over process parameters than conventional methods and has allowed the incessant amalgamation of biomimetics into material manufacturing, thereby improving the adaptation of biomaterials and implants into the human body. The conventional manufacturing practices had design restrictions that prevented mimicking the natural architecture of human tissues into material manufacturing. However, with additive manufacturing, the material construction happens layer-by-layer over multiple axes simultaneously, thus enabling finer control over material placement, thereby overcoming the design challenge that prevented developing complex human architectures. This review substantiates the dexterity of additive manufacturing in utilizing biomimetics to 3D print ceramic, polymer, and metal implants with excellent resemblance to natural tissue. It also cites some clinical references of experimental and commercial approaches employing biomimetic 3D printing of implants.

scholarly journals ADDITIVE MANUFACTURING - APPLICATION OPPORTUNITIES FOR THE AVIATION INDUSTRY

2015 ◽  
Vol 6 (2) ◽  
pp. 63-86
Author(s):  
Dipesh Dhital ◽  
Yvonne Ziegler
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Computer Aided Design ◽  
Free Form ◽  
Aviation Industry ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Subtractive Manufacturing ◽  
Aided Design

Additive Manufacturing also known as 3D Printing is a process whereby a real object of virtually any shape can be created layer by layer from a Computer Aided Design (CAD) model. As opposed to the conventional Subtractive Manufacturing that uses cutting, drilling, milling, welding etc., 3D printing is a free-form fabrication process and does not require any of these processes. The 3D printed parts are lighter, require short lead times, less material and reduce environmental footprint of the manufacturing process; and is thus beneficial to the aerospace industry that pursues improvement in aircraft efficiency, fuel saving and reduction in air pollution. Additionally, 3D printing technology allows for creating geometries that would be impossible to make using moulds and the Subtractive Manufacturing of drilling/milling. 3D printing technology also has the potential to re-localize manufacturing as it allows for the production of products at the particular location, as and when required; and eliminates the need for shipping and warehousing of final products.

Research on Deformation Prediction Method of Laser Melting Deposited Large-Sized Parts Based on Inherent Strain Method

2021 ◽  
Vol 871 ◽  
pp. 65-72
Author(s):  
Cheng Hong Duan ◽  
Xian Kun Cao ◽  
Ming Huang Zhao ◽  
Xiang Peng Luo
Keyword(s):  
Residual Stress ◽  
Laser Energy ◽  
Layer By Layer ◽  
Laser Melting ◽  
Forming Process ◽  
Deformation Prediction ◽  
Metal Parts ◽  
Inherent Strain ◽  
Inherent Strain Method ◽  
Strain Method

In the process of metal parts fabricated by Laser Melting Deposition (LMD), a high temperature gradient will generate due to the instantaneous high laser energy input, which will cause residual stress in the formed part of metal parts, the residual stress will result in defects like warping deformation or even cracking. In this paper, a finite element method based on inherent strain method is proposed to predict the deformation of metal parts fabricated by LMD. Firstly, combing with the birth and death element technology, a local model is established to simulate the layer-by-layer deposition in the LMD forming process, and the values of inherent strain is obtained. Secondly, the obtained inherent strain values is applied to large-sized part layer by layer, and the final deformation of large-sized part is calculated. Based on the proposed method, the efficiency of deformation prediction of large-sized metal parts fabricated by LMD could be effectively improved.

Stress-Strain Behavior of an Octahedral and Octet-Truss Lattice Structure Fabricated Using the CLIP Technology

2017 ◽  
Vol 1142 ◽  
pp. 245-249 ◽  
Author(s):  
Anil Saigal ◽  
John Tumbleston
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Lattice Structure ◽  
Liquid Interface ◽  
Layer By Layer ◽  
Stress Strain ◽  
Strain Behavior ◽  
Octet Truss ◽  
Continuous Liquid Interface Production ◽  
Similar Density

In the rapidly growing field of additive manufacturing (AM), the focus in recent years has shifted from prototyping to manufacturing fully functional, ultralight, ultrastiff end-use parts. This research investigates the stress-strain behavior of an octahedral-and octet-truss lattice structured polyacrylate fabricated using Continuous Liquid Interface Production (CLIP) technology based on 3D printing and additive manufacturing processes. Continuous Liquid Interface Production (CLIP) is a breakthrough technology that grows parts instead of printing them layer by layer. Lattice structures such as the octahedral-and octet-truss lattice have recently attracted a lot of attention since they are often structurally more efficient than foams of a similar density made from the same material, and the ease with which these structures can now be produced using 3D printing and additive manufacturing. This research investigates the stress-strain behavior under compression of an octahedral-and octet-truss lattice structured polyacrylate fabricated using CLIP technology

scholarly journals Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 672 ◽  
Author(s):  
Elena Verdejo de Toro ◽  
Juana Coello Sobrino ◽  
Alberto Martínez Martínez ◽  
Valentín Miguel Eguía ◽  
Jorge Ayllón Pérez
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Injection Moulding ◽  
New Technologies ◽  
Mechanical Response ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Polymer Injection ◽  
Fused Deposition

New technologies are offering progressively more effective alternatives to traditional ones. Additive Manufacturing (AM) is gaining importance in fields related to design, manufacturing, engineering and medicine, especially in applications which require complex geometries. Fused Deposition Modelling (FDM) is framed within AM as a technology in which, due to their layer-by-layer deposition, thermoplastic polymers are used for manufacturing parts with a high degree of accuracy and minimum material waste during the process. The traditional technology corresponding to FDM is Polymer Injection Moulding, in which polymeric pellets are injected by pressure into a mould using the required geometry. The increasing use of PA6 in Additive Manufacturing makes it necessary to study the possibility of replacing certain parts manufactured by injection moulding with those created using FDM. In this work, PA6 was selected due to its higher mechanical properties in comparison with PA12. Moreover, its higher melting point has been a limitation for 3D printing technology, and a further study of composites made of PA6 using 3D printing processes is needed. Nevertheless, analysis of the mechanical response of standardised samples and the influence of the manufacturing process on the polyamide’s mechanical properties needs to be carried out. In this work, a comparative study between the two processes was conducted, and conclusions were drawn from an engineering perspective.

Sign in / Sign up

Export Citation Format

Share Document