Stability of Fibrous Composites

1992 ◽  
Vol 45 (2) ◽  
pp. 61-80 ◽  
Author(s):  
I. Yu. Babich ◽  
A. N. Guz’
Keyword(s):  
Composite Materials ◽  
Fibrous Composite ◽  
Homogeneous Medium ◽  
Stability Loss ◽  
Critical Parameters ◽  
Filler Concentration ◽  
Arbitrary Form ◽  
Fibrous Materials ◽  
Low Concentration ◽  
The Stability

In this review article the three-dimensional linearized theory is presented of the internal and the surface instability of fibrous composite materials. The possible mechanisms of the stability loss in the structure of these materials are investigated. In this investigation the strict model is used of the nonlinearly elastic compressible and incompressible piecewise-homogeneous medium with the arbitrary form of the elastic potential for the theory of finite deformation and for two variants of the theory of small precritical deformations. Problems for a single fiber (fibrous materials with low concentration of the filler, when at stability loss the interaction between fibers is not accounted for), for two fibers (fibrous materials with low concentration of the filler, when as a result of the structure irregularity at the stability loss two neighbouring fibers may interact) for the infinite row and for a doubly periodic system of fibers (fiber materials with nonsmall filler concentration, taking into account fiber interaction), in the infinite and semiinfinite matrix, are considered. Results are obtained for these cases, predominantly when conditions are satisfied of the complete contact on the fiber and matrix polymer or metal interfaces. In the case of the metal matrix at plastic deformations the conception of continuing loading is used, and the change of the unloading zones in the process of stability loss is not accounted for. The influence of the inhomogeneity of the precritical stressed state, resulting from the difference of coefficients of the transverse expansion, of the mechanical properties, and of the volume concentrations of the fibers and the matrix, on the critical parameters is investigated. Application is presented of the obtained results in the fracture mechanics of fibrous composite materials under compression along the reinforcing elements.

Influence of viscosity temperature dependence on the spectral characteristics of the thermoviscous liquids flow stability equation

2019 ◽  
Vol 14 (1) ◽  
pp. 52-58 ◽  
Author(s):  
A.D. Nizamova ◽  
V.N. Kireev ◽  
S.F. Urmancheev
Keyword(s):  
Reynolds Number ◽  
Spectral Characteristics ◽  
Wave Number ◽  
Critical Parameters ◽  
Fluid Viscosity ◽  
Flat Channel ◽  
Stability Equation ◽  
The Stability ◽  
Thermoviscous Fluid ◽  
Sommerfeld Equation

The flow of a viscous model fluid in a flat channel with a non-uniform temperature field is considered. The problem of the stability of a thermoviscous fluid is solved on the basis of the derived generalized Orr-Sommerfeld equation by the spectral decomposition method in Chebyshev polynomials. The effect of taking into account the linear and exponential dependences of the fluid viscosity on temperature on the spectral characteristics of the hydrodynamic stability equation for an incompressible fluid in a flat channel with given different wall temperatures is investigated. Analytically obtained profiles of the flow rate of a thermovisible fluid. The spectral pictures of the eigenvalues of the generalized Orr-Sommerfeld equation are constructed. It is shown that the structure of the spectra largely depends on the properties of the liquid, which are determined by the viscosity functional dependence index. It has been established that for small values of the thermoviscosity parameter the spectrum compares the spectrum for isothermal fluid flow, however, as it increases, the number of eigenvalues and their density increase, that is, there are more points at which the problem has a nontrivial solution. The stability of the flow of a thermoviscous fluid depends on the presence of an eigenvalue with a positive imaginary part among the entire set of eigenvalues found with fixed Reynolds number and wavenumber parameters. It is shown that with a fixed Reynolds number and a wave number with an increase in the thermoviscosity parameter, the flow becomes unstable. The spectral characteristics determine the structure of the eigenfunctions and the critical parameters of the flow of a thermally viscous fluid. The eigenfunctions constructed in the subsequent works show the behavior of transverse-velocity perturbations, their possible growth or decay over time.

Systems with Condensates and Pairing

2018 ◽  
Author(s):  
Klaus Morawetz
Keyword(s):  
Critical Parameters ◽  
Einstein Condensation ◽  
Cooper Pairs ◽  
Pair Breaking ◽  
Systematic Theory ◽  
Bose Einstein Condensation ◽  
T Matrix ◽  
The Stability ◽  
Bose Einstein

The Bose–Einstein condensation and appearance of superfluidity and superconductivity are introduced from basic phenomena. A systematic theory based on the asymmetric expansion of chapter 11 is shown to correct the T-matrix from unphysical multiple-scattering events. The resulting generalised Soven scheme provides the Beliaev equations for Boson’s and the Nambu–Gorkov equations for fermions without the usage of anomalous and non-conserving propagators. This systematic theory allows calculating the fluctuations above and below the critical parameters. Gap equations and Bogoliubov–DeGennes equations are derived from this theory. Interacting Bose systems with finite temperatures are discussed with successively better approximations ranging from Bogoliubov and Popov up to corrected T-matrices. For superconductivity, the asymmetric theory leading to the corrected T-matrix allows for establishing the stability of the condensate and decides correctly about the pair-breaking mechanisms in contrast to conventional approaches. The relation between the correlated density from nonlocal kinetic theory and the density of Cooper pairs is shown.

Ecological Aspects of Producing Fibrous Composite Materials for Plant Cultivation

2021 ◽  
Author(s):  
A. A. Lysenko ◽  
N. I. Sverdlova ◽  
L. E. Vinogradova ◽  
L. M. Shtyagina
Keyword(s):  
Composite Materials ◽  
Fibrous Composite ◽  
Plant Cultivation ◽  
Ecological Aspects

scholarly journals Synthesis of Biobased Phloretin Analogues: An Access to Antioxidant and Anti-Tyrosinase Compounds for Cosmetic Applications

Antioxidants ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 512
Author(s):  
Laurène Minsat ◽  
Cédric Peyrot ◽  
Fanny Brunissen ◽  
Jean-Hugues Renault ◽  
Florent Allais
Keyword(s):  
Natural Products ◽  
Consumer Demand ◽  
Radical Scavenging ◽  
Green Process ◽  
Direct Extraction ◽  
Low Concentration ◽  
Cosmetic Formulations ◽  
Valuable Compounds ◽  
The Stability

The current cosmetic and nutraceutical markets are characterized by a strong consumer demand for a return to natural products that are less harmful to both the consumers and the environment than current petrosourced products. Phloretin, a natural dihydrochalcone (DHC) found in apple, has been widely studied for many years and identified as a strong antioxidant and anti-tyrosinase ingredient for cosmetic formulations. Its low concentration in apples does not allow it to be obtained by direct extraction from biomass in large quantities to meet market volumes and prices. Moreover, its remarkable structure prevents its synthesis through a green process. To overcome these issues, the synthesis of phloretin analogs appears as an alternative to access valuable compounds that are potentially more active than phloretin itself. Under such considerations, 12 chalcones (CHs) and 12 dihydrochalcones (DHCs) were synthesized through a green Claisen–Schmidt condensation using bio-based reagents. In order to evaluate the potential of these molecules, radical scavenging DPPH and anti-tyrosinase tests have been conducted. Moreover, the UV filtering properties and the stability of these analogs towards UV-radiations have been evaluated. Some molecules showed competitive antioxidant and anti-tyrosinase activities regarding phloretin. Two compounds in particular showed EC50 lower than phloretin, one chalcone and one dihydrochalcone.

scholarly journals Survey Summary on Salts Hydrates and Composites Used in Thermochemical Sorption Heat Storage: A Review

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3105
Author(s):  
Mohamed Zbair ◽  
Simona Bennici
Keyword(s):  
Composite Materials ◽  
Energy Density ◽  
Low Temperature ◽  
Mass Transport ◽  
Lower Energy ◽  
Heat Storage ◽  
Porous Matrix ◽  
Salt Hydrates ◽  
Sorption Heat ◽  
The Stability

To improve the proficiency of energy systems in addition to increasing the usage of renewable energies, thermal energy storage (TES) is a strategic path. The present literature review reports an overview of the recent advancements in the utilization of salt hydrates (single or binary mixtures) and composites as sorbents for sorption heat storage. Starting by introducing various heat storage systems, the operating concept of the adsorption TES was clarified and contrasted to other technologies. Consequently, a deep examination and crucial problems related to the different types of salt hydrates and adsorbents were performed. Recent advances in the composite materials used in sorption heat storage were also reviewed and compared. A deep discussion related to safety, price, availability, and hydrothermal stability issues is reported. Salt hydrates display high theoretical energy densities, which are promising materials in TES. However, they show a number of drawbacks for use in the basic state including low temperature overhydration and deliquescence (e.g., MgCl2), high temperature degradation, sluggish kinetics leading to a low temperature rise (e.g., MgSO4), corrosiveness and toxicity (e.g., Na2S), and low mass transport due to the material macrostructure. The biggest advantage of adsorption materials is that they are more hydrothermally stable. However, since adsorption is the most common sorption phenomenon, such materials have a lower energy content. Furthermore, when compared to salt hydrates, they have higher prices per mass, which reduces their appeal even further when combined with lower energy densities. Economies of scale and the optimization of manufacturing processes may help cut costs. Among the zeolites, Zeolite 13X is among the most promising. Temperature lifts of 35–45 °C were reached in lab-scale reactors and micro-scale experiments under the device operating settings. Although the key disadvantage is an excessively high desorption temperature, which is problematic to attain using heat sources, for instance, solar thermal collectors. To increase the energy densities and enhance the stability of adsorbents, composite materials have been examined to ameliorate the stability and to achieve suitable energy densities. Based on the reviewed materials, MgSO4 has been identified as the most promising salt; it presents a higher energy density compared to other salts and can be impregnated in a porous matrix to prepare composites in order to overcome the drawbacks connected to its use as pure salt. However, due to pore volume reduction, potential deliquescence and salt leakage from the composite as well as degradation, issues with heat and mass transport can still exist. In addition, to increase the kinetics, stability, and energy density, the use of binary salt deposited in a porous matrix is suitable. Nevertheless, this solution should take into account the deliquescence, safety, and cost of the selected salts. Therefore, binary systems can be the solution to design innovative materials with predetermined sorption properties adapted to particular sorption heat storage cycles. Finally, working condition, desorption temperature, material costs, lifetime, and reparation, among others, are the essential point for commercial competitiveness. High material costs and desorption temperatures, combined with lower energy densities under normal device operating conditions, decrease their market attractiveness. As a result, the introduction of performance metrics within the scientific community and the use of economic features on a material scale are suggested.

An Operationally Optimized Seven Link Biped Robot Moving on Slopes

2013 ◽  
Author(s):  
Peiman Naseradinmousavi
Keyword(s):  
Simulated Annealing Algorithm ◽  
Nonlinear Modeling ◽  
Biped Robot ◽  
Gait Pattern ◽  
Critical Parameters ◽  
Modeling Process ◽  
Operational Optimization ◽  
Ankle Joints ◽  
Annealing Algorithm ◽  
The Stability

In this paper, we discuss operational optimization of a seven link biped robot using the well-known “Simulated Annealing” algorithm. Some critical parameters affecting the robot gait pattern are selected to be optimized reducing the total energy used. Nonlinear modeling process we published elsewhere is shown here for completeness. The trajectories of both the hip and ankle joints are used to plan the robot gait on slopes and undoubtedly those parameters would be the target ones for the optimization process. The results we obtained reveal considerable amounts of the energy saved for both the ascending and descending surfaces while keeping the robot stable. The stability criterion we utilized for both the modeling and then optimization is “Zero Moment Point”. A comparative study of human evolutionary gait and the operationally optimized robot is also presented.

Effect of Wood Filler Concentration on Physical and Mechanical Properties of PLA-Based Composites

2021 ◽  
Vol 887 ◽  
pp. 110-115
Author(s):  
G.A. Sabirova ◽  
R.R. Safin ◽  
N.R. Galyavetdinov
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Composite Materials ◽  
Impact Strength ◽  
Wood Flour ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Filler Concentration ◽  
High Concentration

This paper presents the findings of experimental studies of the physical and mechanical properties of wood-filled composites based on polylactide (PLA) and vegetable filler in the form of wood flour (WF) thermally modified at 200-240 °C. It also reveals the dependence of the tensile strength, impact strength, bending elastic modulus, and density of composites on the amount of wood filler and the temperature of its thermal pre-modification. We established that an increase in the concentration of the introduced filler and the degree of its heat treatment results in a decrease of the tensile strength, impact strength and density of composite materials, while with a lower binder content, thermal modification at 200 °C has a positive effect on bending elastic modulus. We also found that 40 % content of a wood filler heated to 200 °C is sufficient to maintain relatively high physical and mechanical properties of composite materials. With a higher content of a wood filler, the cost can be reduced but the quality of products made of this material may significantly deteriorate. However, depending on the application and the life cycle of this product, it is possible to develop a formulation that includes a high concentration of filler.

Sign in / Sign up

Export Citation Format

Share Document