Theory of Blade Design for Large Deflections: Part I—Two-Dimensional Cascade

1984 ◽  
Vol 106 (2) ◽  
pp. 346-353 ◽  
Author(s):  
W. R. Hawthorne ◽  
C. Wang ◽  
C. S. Tan ◽  
J. E. McCune
Keyword(s):  
Three Dimensional ◽  
Tangential Velocity ◽  
Mean Value ◽  
Three Dimensions ◽  
Surface Boundary ◽  
Large Deflections ◽  
Two Dimensional ◽  
Axial Compressors ◽  
A Value ◽  
Surface Boundary Condition

As a step in the development of an analytical method for designing highly loaded, three-dimensional blade profiles for axial compressors and turbines, a simple two-dimensional method was first investigated. The fluid is assumed to be incompressible and inviscid, the blades of negligible thickness, and the mean tangential velocity is prescribed. The blades are represented by a distributed bound vorticity whose strength is determined by the prescribed tangential velocity. The velocity induced by the bound vortices is obtained by a conventional Biot-Savart method assuming a first approximation to the blade profile. Using the blade surface boundary condition, the profile is then obtained by iteration. It is shown that this procedure is successful even for large pitch-chord ratios and large deflections. In order to develop a method for use in three dimensions, the velocity is divided into a pitchwise mean value and a value varying periodically in the pitchwise direction. By using generalized functions to represent the bound vorticity and a Clebsch formulation for the periodic velocity, series expressions are obtained which can be adapted to three-dimensional problems. Several numerical results were obtained using both approaches.

A Simplified Theory of Oscillating Aerofoils in Transonic Flow: Review and Extension

1980 ◽  
Vol 31 (4) ◽  
pp. 252-284
Author(s):  
E.H. Dowell
Keyword(s):  
Boundary Condition ◽  
Unsteady Flow ◽  
Flow Separation ◽  
Transonic Flow ◽  
Three Dimensional ◽  
Surface Boundary ◽  
Two Dimensional ◽  
Bernoulli’S Equation ◽  
Surface Boundary Condition

SummarySignificant new results are presented to show to what extent a simplified theory for transonic flow may be used. Solutions are obtained by classical techniques and compared with experiment. Results are given for two-dimensional and three-dimensional, steady and unsteady flow. The effects of flow separation and improvements in Bernoulli’s equation and the surface boundary condition are also briefly discussed.

Mine Impact Burial Prediction From One to Three Dimensions

2008 ◽  
Vol 62 (1) ◽  
Author(s):  
Peter C. Chu
Keyword(s):  
Three Dimensional ◽  
Time History ◽  
Three Dimensions ◽  
Vertical Position ◽  
Burial Depth ◽  
Prediction Errors ◽  
Two Dimensional ◽  
Dimensional Model ◽  
One Dimensional ◽  
Dimensional Models

The Navy’s mine impact burial prediction model creates a time history of a cylindrical or a noncylindrical mine as it falls through air, water, and sediment. The output of the model is the predicted mine trajectory in air and water columns, burial depth/orientation in sediment, as well as height, area, and volume protruding. Model inputs consist of parameters of environment, mine characteristics, and initial release. This paper reviews near three decades’ effort on model development from one to three dimensions: (1) one-dimensional models predict the vertical position of the mine’s center of mass (COM) with the assumption of constant falling angle, (2) two-dimensional models predict the COM position in the (x,z) plane and the rotation around the y-axis, and (3) three-dimensional models predict the COM position in the (x,y,z) space and the rotation around the x-, y-, and z-axes. These models are verified using the data collected from mine impact burial experiments. The one-dimensional model only solves one momentum equation (in the z-direction). It cannot predict the mine trajectory and burial depth well. The two-dimensional model restricts the mine motion in the (x,z) plane (which requires motionless for the environmental fluids) and uses incorrect drag coefficients and inaccurate sediment dynamics. The prediction errors are large in the mine trajectory and burial depth prediction (six to ten times larger than the observed depth in sand bottom of the Monterey Bay). The three-dimensional model predicts the trajectory and burial depth relatively well for cylindrical, near-cylindrical mines, and operational mines such as Manta and Rockan mines.

Bending of an Infinite Beam on an Elastic Foundation

1937 ◽  
Vol 4 (1) ◽  
pp. A1-A7 ◽  
Author(s):  
M. A. Biot
Keyword(s):  
Elastic Foundation ◽  
Poisson Ratio ◽  
Elementary Theory ◽  
Three Dimensional ◽  
Bending Moment ◽  
Two Dimensional ◽  
Concentrated Load ◽  
Elastic Continuum ◽  
Infinite Beam ◽  
A Value

Abstract The elementary theory of the bending of a beam on an elastic foundation is based on the assumption that the beam is resting on a continuously distributed set of springs the stiffness of which is defined by a “modulus of the foundation” k. Very seldom, however, does it happen that the foundation is actually constituted this way. Generally, the foundation is an elastic continuum characterized by two elastic constants, a modulus of elasticity E, and a Poisson ratio ν. The problem of the bending of a beam resting on such a foundation has been approached already by various authors. The author attempts to give in this paper a more exact solution of one aspect of this problem, i.e., the case of an infinite beam under a concentrated load. A notable difference exists between the results obtained from the assumptions of a two-dimensional foundation and of a three-dimensional foundation. Bending-moment and deflection curves for the two-dimensional case are shown in Figs. 4 and 5. A value of the modulus k is given for both cases by which the elementary theory can be used and leads to results which are fairly acceptable. These values depend on the stiffness of the beam and on the elasticity of the foundation.

Monkey superior colliculus represents rapid eye movements in a two-dimensional motor map

1993 ◽  
Vol 69 (3) ◽  
pp. 965-979 ◽  
Author(s):  
K. Hepp ◽  
A. J. Van Opstal ◽  
D. Straumann ◽  
B. J. Hess ◽  
V. Henn
Keyword(s):  
Eye Movements ◽  
Superior Colliculus ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Eye Position ◽  
Two Dimensional ◽  
Vestibular Nystagmus ◽  
Rapid Eye Movements ◽  
Q Model

1. Although the eye has three rotational degrees of freedom, eye positions, during fixations, saccades, and smooth pursuit, with the head stationary and upright, are constrained to a plane by ListingR's law. We investigated whether Listing's law for rapid eye movements is implemented at the level of the deeper layers of the superior colliculus (SC). 2. In three alert rhesus monkeys we tested whether the saccadic motor map of the SC is two dimensional, representing oculocentric target vectors (the vector or V-model), or three dimensional, representing the coordinates of the rotation of the eye from initial to final position (the quaternion or Q-model). 3. Monkeys made spontaneous saccadic eye movements both in the light and in the dark. They were also rotated about various axes to evoke quick phases of vestibular nystagmus, which have three degrees of freedom. Eye positions were measured in three dimensions with the magnetic search coil technique. 4. While the monkey made spontaneous eye movements, we electrically stimulated the deeper layers of the SC and elicited saccades from a wide range of initial positions. According to the Q-model, the torsional component of eye position after stimulation should be uniquely related to saccade onset position. However, stimulation at 110 sites induced no eye torsion, in line with the prediction of the V-model. 5. Activity of saccade-related burst neurons in the deeper layers of the SC was analyzed during rapid eye movements in three dimensions. No systematic eye-position dependence of the movement fields, as predicted by the Q-model, could be detected for these cells. Instead, the data fitted closely the predictions made by the V-model. 6. In two monkeys, both SC were reversibly inactivated by symmetrical bilateral injections of muscimol. The frequency of spontaneous saccades in the light decreased dramatically. Although the remaining spontaneous saccades were slow, Listing's law was still obeyed, both during fixations and saccadic gaze shifts. In the dark, vestibularly elicited fast phases of nystagmus could still be generated in three dimensions. Although the fastest quick phases of horizontal and vertical nystagmus were slower by about a factor of 1.5, those of torsional quick phases were unaffected. 7. On the basis of the electrical stimulation data and the properties revealed by the movement field analysis, we conclude that the collicular motor map is two dimensional. The reversible inactivation results suggest that the SC is not the site where three-dimensional fast phases of vestibular nystagmus are generated.(ABSTRACT TRUNCATED AT 400 WORDS)

A Novel Boundary Element Method for Linear Elasticity With No Numerical Integration for Two-Dimensional and Line Integrals for Three-Dimensional Problems

1994 ◽  
Vol 61 (2) ◽  
pp. 264-269 ◽  
Author(s):  
A. Nagarajan ◽  
E. Lutz ◽  
S. Mukherjee
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Numerical Integration ◽  
Linear Elasticity ◽  
Three Dimensional ◽  
Contour Method ◽  
Surface Boundary ◽  
Two Dimensional ◽  
Boundary Contour Method ◽  
Element Method

This paper presents a novel application of the boundary element method to solve problems in linear elasticity. The new method is called the Boundary Contour Method. This approach requires no numerical integration at all for two-dimensional problems and numerical evaluation of line integrals only for three-dimensional problems; even for curved line or surface boundary elements of arbitrary shape! Numerical results are presented for some two-dimensional problems.

Bringing Dynamic Geometry to Three Dimensions

2015 ◽  
pp. 68-99
Author(s):  
Nicholas H. Wasserman
Keyword(s):  
Teaching And Learning ◽  
Spatial Reasoning ◽  
Mathematics Classroom ◽  
Three Dimensional ◽  
Dynamic Geometry ◽  
State Standards ◽  
Three Dimensions ◽  
Two Dimensional ◽  
The Common ◽  
K 12

Contemporary technologies have impacted the teaching and learning of mathematics in significant ways, particularly through the incorporation of dynamic software and applets. Interactive geometry software such as Geometers Sketchpad (GSP) and GeoGebra has transformed students' ability to interact with the geometry of plane figures, helping visualize and verify conjectures. Similar to what GSP and GeoGebra have done for two-dimensional geometry in mathematics education, SketchUp™ has the potential to do for aspects of three-dimensional geometry. This chapter provides example cases, aligned with the Common Core State Standards in mathematics, for how the dynamic and unique features of SketchUp™ can be integrated into the K-12 mathematics classroom to support and aid students' spatial reasoning and knowledge of three-dimensional figures.

scholarly journals The magnetorotational instability prefers three dimensions

2020 ◽  
Vol 476 (2233) ◽  
pp. 20190622
Author(s):  
Jeffrey S. Oishi ◽  
Geoffrey M. Vasil ◽  
Morgan Baxter ◽  
Andrew Swan ◽  
Keaton J. Burns ◽  
...  
Keyword(s):  
Shear Rate ◽  
Angular Velocity ◽  
Laboratory Experiments ◽  
Three Dimensional ◽  
Linear Instability ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Magnetorotational Instability ◽  
Dynamo Action ◽  
Wide Range

The magnetorotational instability (MRI) occurs when a weak magnetic field destabilizes a rotating, electrically conducting fluid with inwardly increasing angular velocity. The MRI is essential to astrophysical disc theory where the shear is typically Keplerian. Internal shear layers in stars may also be MRI-unstable, and they take a wide range of profiles, including near-critical. We show that the fastest growing modes of an ideal magnetofluid are three-dimensional provided the shear rate, S , is near the two-dimensional onset value, S c . For a Keplerian shear, three-dimensional modes are unstable above S  ≈ 0.10 S c , and dominate the two-dimensional modes until S  ≈ 2.05 S c . These three-dimensional modes dominate for shear profiles relevant to stars and at magnetic Prandtl numbers relevant to liquid-metal laboratory experiments. Significant numbers of rapidly growing three-dimensional modes remainy well past 2.05 S c . These finding are significant in three ways. First, weakly nonlinear theory suggests that the MRI saturates by pushing the shear rate to its critical value. This can happen for systems, such as stars and laboratory experiments, that can rearrange their angular velocity profiles. Second, the non-normal character and large transient growth of MRI modes should be important whenever three-dimensionality exists. Finally, three-dimensional growth suggests direct dynamo action driven from the linear instability.

scholarly journals On the Measure-Preserving Mappings with Three-Dimensions

1993 ◽  
Vol 132 ◽  
pp. 73-89
Author(s):  
Yi-Sui Sun
Keyword(s):  
Fixed Point ◽  
Invariant Manifolds ◽  
Three Dimensional ◽  
Invariant Curve ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Kolmogorov Entropy ◽  
Numerical Exploration ◽  
Area Preserving ◽  
Dimensional Mapping

AbstractWe have systematically made the numerical exploration about the perturbation extension of area-preserving mappings to three-dimensional ones, in which the fixed points of area preserving are elliptic, parabolic or hyperbolic respectively. It has been observed that: (i) the invariant manifolds in the vicinity of the fixed point generally don’t exist (ii) when the invariant curve of original two-dimensional mapping exists the invariant tubes do also in the neighbourhood of the invariant curve (iii) for the perturbation extension of area-preserving mapping the invariant manifolds can only be generated in the subset of the invariant manifolds of original two-dimensional mapping, (iv) for the perturbation extension of area preserving mappings with hyperbolic or parabolic fixed point the ordered region near and far from the invariant curve will be destroyed by perturbation more easily than the other one, This is a result different from the case with the elliptic fixed point. In the latter the ordered region near invariant curve is solid. Some of the results have been demonstrated exactly.Finally we have discussed the Kolmogorov Entropy of the mappings and studied some applications.

An Intrinsically Three-Dimensional Fractal

2014 ◽  
Vol 24 (06) ◽  
pp. 1430017 ◽  
Author(s):  
M. Fernández-Guasti
Keyword(s):  
Bifurcation Diagram ◽  
Chaotic Behavior ◽  
Logistic Map ◽  
Three Dimensional ◽  
Periodic Points ◽  
Three Dimensions ◽  
Two Dimensional ◽  
Hyperbolic Numbers ◽  
Self Similar ◽  
One To One

The quadratic iteration is mapped using a nondistributive real scator algebra in three dimensions. The bound set S has a rich fractal-like boundary. Periodic points on the scalar axis are necessarily surrounded by off axis divergent magnitude points. There is a one-to-one correspondence of this set with the bifurcation diagram of the logistic map. The three-dimensional S set exhibits self-similar 3D copies of the elementary fractal along the negative scalar axis. These 3D copies correspond to the windows amid the chaotic behavior of the logistic map. Nonetheless, the two-dimensional projection becomes identical to the nonfractal quadratic iteration produced with hyperbolic numbers. Two- and three-dimensional renderings are presented to explore some of the features of this set.

Comparison of Two Base-Potentials for a Slender-Body Method

2012 ◽  
Author(s):  
Mahmoud Alidadi ◽  
Sander Calisal
Keyword(s):  
Three Dimensional ◽  
Slender Body ◽  
Surface Boundary ◽  
Two Dimensional ◽  
Three Dimensional Flow ◽  
Wave Elevation ◽  
Surface Boundary Conditions ◽  
Perturbation Potential ◽  
Order Of Magnitude ◽  
Body Method

The effects of two base-potentials on the accuracy of a slender-body method are studied in this paper. In the formulation for this method which is developed for the slender ships, the velocity potential is decomposed into a base-potential and a perturbation potential. Then using an order of magnitude analysis, the three-dimensional flow problem is simplified into a series of two-dimensional problems for the perturbation potential. These two-dimensional problems are solved with the linearized free surface boundary conditions, using a mixed Eulerian-Lagrangian method. Finally for the two base-potentials, the numerical wave elevation along a Wigleyull are compared with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document