Overtrawlability and Mechanical Damage of Pipe-in-Pipe

2013 ◽  
Vol 81 (3) ◽  
Author(s):  
Zheng Jiexin ◽  
Andrew Palmer ◽  
Paul Brunning
Keyword(s):  
Finite Element ◽  
Static Analysis ◽  
Standard Method ◽  
Mechanical Damage ◽  
Static Indentation ◽  
Indentation Tests ◽  
Offshore Industry ◽  
Impact Phase ◽  
High Level ◽  
The Impact

A pipeline on the seabed may be struck by moving trawl gear, and that may damage the pipeline. Trenching can be a useful but expensive way to protect the pipeline. Pipe-in-pipe and bundled pipeline systems are widely used in the offshore industry recently because of their high level of thermal insulation and because they lend themselves to rapid and economical installation. However, there is no clearly specified standard method to analyze the overtrawlability of pipe-in-pipe systems. If we apply the same method as for the single wall pipe, it is likely to result in a conservative design for the pipe-in-pipe. The objective of this paper is to investigate the overtrawlability of pipe-in-pipe, especially in the impact phase, and to fill this gap. In this study, the authors demonstrate that a quasi-static analysis can replace a dynamic analysis to some extent because the overall response does not show a big difference. The demonstration is based on both quasi-static indentation tests and impact tests for single wall pipe and pipe-in-pipe, as well as the corresponding finite element (FE) models. The FE models not only help to compare the responses but also offer a way to analyze the overtrawlability of the pipe-in-pipe. The quasi-static FE models are used for a further comparison between a pipe-in-pipe and a 406.4 mm (16 in.) single wall pipe to illustrate the overtrawlability of the pipe-in-pipe.

scholarly journals Comparative study of impact and static indentation tests on particulate-filled thermoplastic fluoropolymer coatings

2013 ◽  
Vol 228 (1) ◽  
pp. 22-30 ◽  
Author(s):  
Y Xu ◽  
BG Mellor
Keyword(s):  
Impact Test ◽  
Steel Substrate ◽  
Impact Testing ◽  
Substrate Thickness ◽  
Dynamic Impact ◽  
Depth Of Penetration ◽  
Impact Tests ◽  
Static Indentation ◽  
Indentation Tests ◽  
The Impact

This study investigates the performance of particulate-filled thermoplastic fluoropolymer coatings under both dynamic impact tests and static indentation tests. An instrumented impact testing rig was used to measure the impact energy, impact velocity, acceleration and impact force during the impact tests. Coating samples with different thicknesses of coating layers and steel substrate were impact tested to investigate the effect of coating and substrate thickness on the impact response and damage to the coatings. The data obtained from the dynamic tests were used to calculate the Meyer hardness values of the coating and compared with the Meyer hardness results obtained from Brinell indentation tests on the coating. The Meyer index m was similar under dynamic impact and static indentation testing conditions. The Meyer hardness calculated from the impact tests does not change markedly as a function of depth of penetration normalised to the thickness of coating, whereas the Brinell hardness increases with the depth of penetration to coating thickness ratio. For a given value of indentation strain, the Meyer hardness calculated from the maximum force measured in the impact test is approximately 2.5 times that resulting from the Brinell test. This reflects the fact that the higher strain rate in the impact test would give rise to a higher flow stress and thus hardness.

ПРАГМАТИЧНИЙ ПОТЕНЦІАЛ НАТИВНОЇ РЕКЛАМИ: ФОРМИ, ТРЕНДИ (НА ПРИКЛАДІ НАТИВНОГО КОНТЕНТУ В СОЦІАЛЬНІЙ МЕРЕЖІ FACEBOOK ЩОДО БРЕНДА ФАКУЛЬТЕТУ ЖУРНАЛІСТИКИ ЗНУ)

2020 ◽  
pp. 113
Author(s):  
V. Kovpak ◽  
N. Trotsenko
Keyword(s):  
Social Network ◽  
Professional Training ◽  
Educational Process ◽  
Communication Strategy ◽  
Student Centered ◽  
Teacher Student ◽  
The Social ◽  
National University ◽  
High Level ◽  
The Impact

<div><p><em>The article analyzes the peculiarities of the format of native advertising in the media space, its pragmatic potential (in particular, on the example of native content in the social network Facebook by the brand of the journalism department of ZNU), highlights the types and trends of native advertising. The following research methods were used to achieve the purpose of intelligence: descriptive (content content, including various examples), comparative (content presentation options) and typological (types, trends of native advertising, in particular, cross-media as an opportunity to submit content in different formats (video, audio, photos, text, infographics, etc.)), content analysis method using Internet services (using Popsters service). And the native code for analytics was the page of the journalism department of Zaporizhzhya National University on the social network Facebook. After all, the brand of the journalism department of Zaporozhye National University in 2019 celebrates its 15th anniversary. The brand vector is its value component and professional training with balanced distribution of theoretical and practical blocks (seven practices), student-centered (democratic interaction and high-level teacher-student dialogue) and integration into Ukrainian and world educational process (participation in grant programs).</em></p></div><p><em>And advertising on social networks is also a kind of native content, which does not appear in special blocks, and is organically inscribed on one page or another and unobtrusively offers, just remembering the product as if «to the word». Popsters service functionality, which evaluates an account (or linked accounts of one person) for 35 parameters, but the main three areas: reach or influence, or how many users evaluate, comment on the recording; true reach – the number of people affected; network score – an assessment of the audience’s response to the impact, or how far the network information diverges (how many share information on this page).</em></p><p><strong><em>Key words:</em></strong><em> nativeness, native advertising, branded content, special project, communication strategy.</em></p>

THE IMPACT OF UKRAINE'S EXCISE DUTY POLICY ON THE TRANSFORMATION PROCESSES OF THE TOBACCO MARKET

2020 ◽  
Vol 2020 (10) ◽  
pp. 19-33
Author(s):  
Nadiia NOVYTSKA ◽  
◽  
Inna KHLIEBNIKOVA ◽  
Keyword(s):  
Structural Changes ◽  
Tax Avoidance ◽  
Transformation Process ◽  
State Regulation ◽  
Tobacco Products ◽  
Excise Duty ◽  
Increasing Demand ◽  
High Level ◽  
The Impact ◽  
Transformation Processes

The market of tobacco products in Ukraine is one of the most dynamic and competitive. It develops under the influence of certain factors that cause structural changes, therefore, the aim of the article is to conduct a comprehensive analysis of transformation processes in the market of tobacco and their alternatives in Ukraine and identify the factors that cause them. The high level of tax burden and the proliferation of alternative products with a potentially lower risk to human health, including heating tobacco products and e-cigarettes, are key factors in the market’s transformation process. Their presence leads to an increase in illicit turnover of tobacco products, which accounts for 6.37% of the market, and the gradual replacement of cigarettes with alternative products, which account for 12.95%. The presence on the market of products that are not taxed or taxed at lower rates is one of the reasons for the reduction of excise duty revenues. According to the results of 2019, the planned indicators of revenues were not met by 23.5%. Other reasons for non-fulfillment of excise duty revenues include: declining dynamics of the tobacco products market; reduction in the number of smokers; reorientation of «cheap whites» cigarette flows from Ukraine to neighboring countries; tax avoidance. Prospects for further research are identified, namely the need to develop measures for state regulation and optimization of excise duty taxation of tobacco products and their alternatives, taking into account the risks to public health and increasing demand of illegal products.

Role of Credit Rating in determining Capital structure: Evidence from Non-Financial sector of Pakistan

2020 ◽  
Vol 38 (3) ◽  
Author(s):  
Shoaib Ali ◽  
Imran Yousaf ◽  
Muhammad Naveed
Keyword(s):  
Capital Structure ◽  
Credit Rating ◽  
Least Square ◽  
Annual Data ◽  
Leverage Ratio ◽  
Financial Decisions ◽  
Financial Firms ◽  
High Level ◽  
The Impact ◽  
The Capital Structure

This paper aims to examine the impact of external credit ratings on the financial decisions of the firms in Pakistan.  This study uses the annual data of 70 non-financial firms for the period 2012-2018. It uses ordinary least square (OLS) to estimate the impact of credit rating on capital structure. The results show that rated firm has a high level of leverage. Moreover, Profitability and tanagability are also found to be a significantly negative determinant of the capital structure, whereas, size of the firm has a significant positive relationship with the capital structure of the firm.  Besides, there exists a non-linear relationship between the credit rating and the capital structure. The rated firms have higher leverage as compared to the non-rated firms. The high and low rated firms have a low level of leverage, while mid rated firms have a higher leverage ratio. The finding of the study have practical implications for the manager; they can have easier access to the financial market by just having a credit rating no matter high or low. Policymakers must stress upon the rating agencies to keep improving themselves as their rating severs as the measure to judge the creditworthiness of the firm by both the investors and management as well.

QUASI-STATIC INDENTATION TESTS ON POLYURETHANE AND PHENOLIC FOAM SANDWICH PANELS

2017 ◽  
Vol 13 (1) ◽  
pp. 15
Author(s):  
MUDASSIR SYED ◽  
HUSSAIN MANZOOR .M ◽  
SHANKAR RAVI.D.V. ◽  
◽  
◽  
...  
Keyword(s):  
Sandwich Panels ◽  
Phenolic Foam ◽  
Static Indentation ◽  
Indentation Tests

IDENTIFICATION AND ASSESSMENT OF RISK FACTORS ROLE IN MYOCARDIAL INFARCTION DEVELOPMENT

2019 ◽  
Vol 72 (5) ◽  
pp. 779-783
Author(s):  
Victor A. Ognev ◽  
Anna A. Podpriadova ◽  
Anna V. Lisova
Keyword(s):  
Risk Factors ◽  
Myocardial Infarction ◽  
Cardiovascular Disease ◽  
Cardiovascular System ◽  
Control Group ◽  
Biological Factors ◽  
Prevention And Treatment ◽  
High Level ◽  
Social Importance ◽  
The Impact

Introduction:The high level of morbidity and mortality from cardiovascular disease is largely due toinsufficient influence on the main risk factors that contribute to the development of myocardial infarction.Therefore, a detailed study and assessment of risk factors is among the most important problems of medical and social importance. The aim: To study and evaluate the impact of biological, social and hygienic, social and economic, psychological, natural and climatic risk factors on the development of myocardial infarction. Materials and methods: A sociological survey was conducted in 500 people aged 34 to 85. They were divided into two groups. The main group consisted of 310 patients with myocardial infarction. The control group consisted of 190 practically healthy people, identical by age, gender and other parameters, without diseases of the cardiovascular system. Results: It was defined that 30 factors have a significant impact on the development of myocardial infarction.Data analysis revealed that the leading risk factors for myocardial infarction were biological and socio-hygienic. The main biological factors were: hypertension and hypercholesterolemia. The man socio-hygienic factor was smoking. Conclusions: Identification of risk factors provides new opportunities for the development of more effective approaches for the prevention and treatment of myocardial infarction.

scholarly journals Potential and limitations of finite element modelling in assessing structural integrity of coralline algae under future global change

2015 ◽  
Vol 12 (19) ◽  
pp. 5871-5883 ◽  
Author(s):  
L. A. Melbourne ◽  
J. Griffin ◽  
D. N. Schmidt ◽  
E. J. Rayfield
Keyword(s):  
Climate Change ◽  
Finite Element ◽  
Structural Integrity ◽  
Geometric Model ◽  
Algal Growth ◽  
Coralline Algae ◽  
Rocky Shores ◽  
Element Analysis ◽  
Scan Data ◽  
The Impact

Abstract. Coralline algae are important habitat formers found on all rocky shores. While the impact of future ocean acidification on the physiological performance of the species has been well studied, little research has focused on potential changes in structural integrity in response to climate change. A previous study using 2-D Finite Element Analysis (FEA) suggested increased vulnerability to fracture (by wave action or boring) in algae grown under high CO2 conditions. To assess how realistically 2-D simplified models represent structural performance, a series of increasingly biologically accurate 3-D FE models that represent different aspects of coralline algal growth were developed. Simplified geometric 3-D models of the genus Lithothamnion were compared to models created from computed tomography (CT) scan data of the same genus. The biologically accurate model and the simplified geometric model representing individual cells had similar average stresses and stress distributions, emphasising the importance of the cell walls in dissipating the stress throughout the structure. In contrast models without the accurate representation of the cell geometry resulted in larger stress and strain results. Our more complex 3-D model reiterated the potential of climate change to diminish the structural integrity of the organism. This suggests that under future environmental conditions the weakening of the coralline algal skeleton along with increased external pressures (wave and bioerosion) may negatively influence the ability for coralline algae to maintain a habitat able to sustain high levels of biodiversity.

Sign in / Sign up

Export Citation Format

Share Document