Model-Based Control for Mode Transition Between Spark Ignition and HCCI Combustion

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Shupeng Zhang ◽  
Ruitao Song ◽  
Guoming G. Zhu ◽  
Harold Schock
Keyword(s):  
Spark Ignition ◽  
Intake Manifold ◽  
Mode Transition ◽  
Si Engine ◽  
Electronic Throttle ◽  
Engine Torque ◽  
Hcci Combustion ◽  
Charge Mixture ◽  
Variable Valve ◽  
Operational Range

While the homogeneous charge compression ignition (HCCI) combustion has its advantages of high thermal efficiency with low emissions, its operational range is limited in both engine speed and load. To utilize the advantage of the HCCI combustion, an HCCI capable spark ignition (SI) engine is required. One of the key challenges of developing such an engine is to achieve smooth mode transition between SI and HCCI combustion, where the in-cylinder thermal and charge mixture properties are quite different due to the distinct combustion characteristics. In this paper, a control strategy for smooth mode transition between SI and HCCI combustion is developed and experimentally validated for an HCCI capable SI engine equipped with electrical variable valve timing (EVVT) systems, dual-lift valves, and electronic throttle control (ETC) system. During the mode transition, the intake manifold air pressure is controlled by tracking the desired throttle position updated cycle-by-cycle; and an iterative learning fuel mass controller, combined with sensitivity-based compensation, is used to manage the engine torque in terms of net mean effective pressure (NMEP) at the desired level for smooth mode transition. Note that the NMEP is directly correlated to the engine output torque. Experiment results show that the developed controller is able to achieve smooth combustion mode transition, where the NMEP fluctuation is kept below 3.8% during the mode transition.

Model-Based Mode Transition Control Between SI and HCCI Combustion

2014 ◽  
Author(s):  
Shupeng Zhang ◽  
Guoming G. Zhu
Keyword(s):  
External Disturbance ◽  
Thermal Conditions ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Mode Transition ◽  
Electronic Throttle ◽  
Engine Torque ◽  
Transition Control ◽  
Hcci Combustion ◽  
Mode Transition Control

While the homogeneous charge compression ignition (HCCI) combustion has its advantages of high thermal efficiency with low emissions, its operational range is limited in both engine speed and load. To utilize the advantage of the HCCI combustion an HCCI capable SI (spark ignition) engine needs to be developed. One of the key challenges of developing such an engine is how to achieve smooth mode transition between SI and HCCI combustion, where the in-cylinder thermal conditions are quite different due to the distinct combustion characteristics. In this paper, an SI-HCCI mode transition control strategy was developed for an HCCI capable SI engine equipped with electrical variable valve timing (EVVT) systems with two step-lift valves and electronic throttle control (ETC) system, and the developed strategy was validated in hardware-in-the-loop (HIL) simulations. During the mode transition, a MAP (manifold air pressure) controller was used to track the desired intake manifold pressure for charge air management, and a fuel management controller is used to provide the desired engine torque. HIL simulation results show that the developed controller is able to achieve smooth combustion mode transition under unmodeled dynamics and external disturbance.

Analysis of Variable Intake Runner Lengths and Intake Valve Open Timings on Engine Performances

2014 ◽  
Vol 663 ◽  
pp. 336-341 ◽  
Author(s):  
Mohd Farid Muhamad Said ◽  
Zulkarnain Abdul Latiff ◽  
Aminuddin Saat ◽  
Mazlan Said ◽  
Shaiful Fadzil Zainal Abidin
Keyword(s):  
Engine Performance ◽  
Intake Manifold ◽  
Intake Valve ◽  
Si Engine ◽  
Engine Simulation ◽  
Engine Model ◽  
Optimum Parameters ◽  
Comparison Results ◽  
Variable Valve ◽  
Engine Development

In this paper, engine simulation tool is used to investigate the effect of variable intake manifold and variable valve timing technologies on the engine performance at full load engine conditions. Here, an engine model of 1.6 litre four cylinders, four stroke spark ignition (SI) engine is constructed using GT-Power software to represent the real engine conditions. This constructed model is then correlated to the experimental data to make sure the accuracy of this model. The comparison results of volumetric efficiency (VE), intake manifold air pressure (MAP), exhaust manifold back pressure (BckPress) and brake specific fuel consumption (BSFC) show very well agreement with the differences of less than 4%. Then this correlated model is used to predict the engine performance at various intake runner lengths (IRL) and various intake valve open (IVO) timings. Design of experiment and optimisation tool are applied to obtain optimum parameters. Here, several configurations of IRL and IVO timing are proposed to give several options during the engine development work. A significant improvement is found at configuration of variable IVO timing and variable IRL compared to fixed IVO timing and fixed IRL.

An Investigation of the Effect of 2T Oil Blend on Spark Ignition Engine Performance

2014 ◽  
Vol 663 ◽  
pp. 289-293
Author(s):  
M. Nurhidayat Zahelem ◽  
A. Siti Rohana ◽  
N. Haniza B. Jemily ◽  
M. Amzari Aris ◽  
Shukri Zain ◽  
...  
Keyword(s):  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
Brake Thermal Efficiency ◽  
Blend Ratio ◽  
Engine Torque ◽  
Synthetic Oil ◽  
Brake Mean Effective Pressure ◽  
Oil Blend

This paper presents the results of an investigation on the effect of 2T oil blend on the performance of Spark Ignition (SI) engine. Three different types of 2T-oils; mineral oil, semi-synthetic oil and fully synthetic oil were tested according to blend ratio before the mixing process with fuel in the carburetor. In the experiment, a two-stroke single-cylinder engine was coupled to a 20 kW generator dynamometer to measure engine performance parameters; engine torque, engine power (B.P), brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and brake mean effective pressure (BMEP) at various engine speeds with maximum engine load. The results show correlation between engine performances and 2T-oil blended as a function of type of 2T-oils used.

A Numerical Simulation of Analysis of Backfiring Phenomena in a Hydrogen-Fueled Spark Ignition Engine

2016 ◽  
Vol 138 (10) ◽  
Author(s):  
K. A. Subramanian ◽  
B. L. Salvi
Keyword(s):  
Greenhouse Gas Emission ◽  
Hot Spot ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Injection Timing ◽  
Si Engine ◽  
Engine Operation ◽  
Study Results ◽  
Residual Gas

Hydrogen utilization in spark ignition (SI) engines could reduce urban pollution including particulate matter as well as greenhouse gas emission. However, backfiring, which is an undesirable combustion process of intake charge in hydrogen-fueled SI engine with manifold-based injection, is one of the major technical issues in view of safety of engine operation. Backfiring occurs generally during suction stroke as the hydrogen–air charge interacts with residual gas, resulting in flame growth and propagation toward upstream of engine's intake manifold, resulting in stalling of engine operation and high risk of safety. This work is aimed at analysis of backfiring in a hydrogen-fueled SI engine. The results indicate that backfiring is mainly function of residual gas temperature, start of hydrogen injection timing, and equivalence ratio. Any hot-spot present in the cylinder would act as ignition source resulting in more chances of backfiring. In addition to this, computational fluid dynamics (CFD) analysis was carried out in order to assess flow characteristics of hydrogen and air during suction stroke in intake manifold. Furthermore, numerical analysis of intake charge velocity, flame speed (deflagration), and flame propagation (backfiring) toward upstream of intake manifold was also carried out. Some notable points of backfiring control strategy including exhaust gas recirculation (EGR) and retarded (late) hydrogen injection timing are emerged from this study for minimizing chance of backfiring. This study results are useful for development of dedicated SI engine for hydrogen fuel in the aspects of elimination of backfiring.

scholarly journals Effect of Water Vapor Injection on the Performance and Emissions Characteristics of a Spark-Ignition Engine

2021 ◽  
Vol 13 (16) ◽  
pp. 9229
Author(s):  
Ming-Hsien Hsueh ◽  
Chao-Jung Lai ◽  
Meng-Chang Hsieh ◽  
Shi-Hao Wang ◽  
Chia-Hsin Hsieh ◽  
...  
Keyword(s):  
Air Pollution ◽  
Water Vapor ◽  
Internal Combustion Engines ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Injection System ◽  
Intake Manifold ◽  
Exhaust Emission ◽  
Engine Torque ◽  
Vapor Injection

The exhaust emissions from Internal Combustion Engines (ICE) are currently one of the main sources of air pollution. This research presented a method for improving the exhaust gases and the performance of a Spark-Ignition (SI) engine using a water vapor injection system and a Non-Thermal Plasma (NTP) system. These two systems were installed on the intake manifold to investigate their effects on the engine’s performance and the characteristics of exhaust emission using different air/fuel (A/F) ratios and engine speeds. The temperatures of the injected water were adjusted to 5 and 25 °C, using a thermoelectric cooler (TEC) temperature control device. The total hydrocarbons (HC), nitrogen oxide (NOx), and engine torque were measured at different A/F ratios and engine speeds. The results indicated that the adaptation of the water vapor injection system and NTP system increased the content of the combustibles and combustion-supporting substances while achieving better emissions and torque. According to the test results, while the engine torque under 25 °C water+NTP was raised to 7.29%, the HC under 25 °C water+NTP and the NOx under 25 °C water were reduced to 16.31% and 11.88%, respectively. In conclusion, the water vapor injection and the NTP systems installed on the intake manifold could significantly reduce air pollution and improve engine performance for a more sustainable environment.

A Numerical Simulation of Analysis of Backfiring Phenomena in a Hydrogen Fuelled Spark Ignition Engine

2015 ◽  
Author(s):  
K. A. Subramanian ◽  
B. L. Salvi
Keyword(s):  
Hot Spot ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Injection Timing ◽  
Ignition Process ◽  
Si Engine ◽  
Engine Operation ◽  
Study Results ◽  
Residual Gas

Hydrogen utilization in spark ignition engines could reduce urban pollution including particulate matter as well as greenhouse gas (carbon dioxide) emission. However, backfiring, which is an undesirable combustion process of intake charge in hydrogen fuelled spark ignition (SI) engine with manifold based injection, is one of the major technical issues in view of safety as well as continuous engine operation as ignition process could proceed instantaneously due to less ignition energy requirement of hydrogen. Backfiring occurs generally during suction stroke as the hydrogen-air charge interacts with residual gas resulting in flame growth and propagation towards upstream of engine’s intake manifold resulting in stalling of engine operation and high risk of safety. This work is aimed at analysis of backfiring in a hydrogen fuelled SI engine. The results indicate that backfiring is mainly function of residual gas temperature, start of hydrogen injection timing and equivalence ratio. Any hot-spot present in the cylinder would act as ignition source resulting in more chances of backfiring. In addition to this, CFD analysis was carried out in order to assess flow characteristics of hydrogen and air during suction stroke in intake manifold. Furthermore, numerical analysis of intake charge velocity, flame speed (deflagration), and flame propagation (backfiring) towards upstream of intake manifold was also carried out. Some notable points of backfiring control strategy including exhaust gas recirculation (EGR) and retarded (late) hydrogen injection timing are emerged from this study for minimizing chance of backfiring. This study results are useful for development of dedicated spark ignition engine for hydrogen fuel in the aspects of elimination of backfiring.

Experimental on the Effects of Various Air Filter Elements on Spark Ignition Engine Performance

2014 ◽  
Vol 663 ◽  
pp. 354-358
Author(s):  
Shukri Zain ◽  
M. Nurhidayat Zahelem ◽  
M. Hisyam Basri
Keyword(s):  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
Air Filter ◽  
Brake Thermal Efficiency ◽  
Engine Torque ◽  
Single Cylinder Engine ◽  
Filtering Element ◽  
Engine Power

This paper presents the results of an investigation on the effect of air filter elements on the performance of spark ignition (SI) engine. Three different types of material; paper, cotton and foam were tested as filtering element in the air filter before the mixing process with fuel in the carburettor. In the experiment, a four-stroke single-cylinder engine was coupled to a 20 kW generator dynamometer to measure engine performance parameters; engine torque, engine power (B.P), brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) at various engine speeds with maximum engine load. The results show correlation between engine performance and the qualities of filtered air as a function of type of air filter element/material used.

An Investigation of the Effect of Air Filter Elements on Spark Ignition Engine Performance

2013 ◽  
Vol 315 ◽  
pp. 354-358 ◽  
Author(s):  
Shukri Zain ◽  
Shuib Husin
Keyword(s):  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
Air Filter ◽  
Brake Thermal Efficiency ◽  
Engine Torque ◽  
Single Cylinder Engine ◽  
Brake Mean Effective Pressure ◽  
Filtering Element

This paper presents the results of an investigation on the effect of air filter elements on the performance of Spark Ignition (SI) engine. Three different types of material; paper, cotton and foam were tested as filtering element in the air filter before the mixing process with fuel in the carburettor. In the experiment, a four-stroke single-cylinder engine was coupled to a 20kW generator dynamometer to measure engine performance parameters; engine torque, engine power (B.P), brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and brake mean effective pressure (BMEP) at various engine speeds with maximum engine load. The results show correlation between engine performance and the qualities of filtered air as a function of type of air filter element/material used.

scholarly journals Optimization of Fuel Consumption of a SI Engine Using Variable Valve Timing and Variable Length Intake Manifold Techniques

2018 ◽  
Vol 2 (2) ◽  
pp. 1-12
Author(s):  
Mohammad Keshavarz ◽  
Mehdi Keshavarz
Keyword(s):  
Fuel Consumption ◽  
Internal Combustion Engines ◽  
Variable Length ◽  
Intake Manifold ◽  
Variable Valve Timing ◽  
Valve Timing ◽  
Si Engine ◽  
World Crisis ◽  
Toxic Emissions ◽  
Variable Valve

According to the world crisis about fuel consumption and environmental concerns regarding toxic emissions of internal combustion engines, the engines with higher efficiency and lower fuel consumption have been a topic of research in last decades. In this study, variable valve timing (VVT) and variable length intake manifold (VLIM) techniques are used to optimize the fuel consumption of an SI engine. At first, all components of engine are modeled in GT-POWER and a comparison with experimental results is performed to confirm the accuracy of the model. Then, the discrete-gird algorithm is employed to optimize the parameters in GT-POWER. The results obtained indicate that optimal valve timing and intake manifold length significantly reduces brake specific fuel consumption (BSFC).

Sign in / Sign up

Export Citation Format

Share Document