Development of Technical Creativity Featuring Modified TRIZ-AM Inventive Principle to Support Additive Manufacturing

2021 ◽  
pp. 1-47
Author(s):  
Siti Nur Humaira Mazlan ◽  
Aini Zuhra Abdul Kadir ◽  
Mariusz Deja ◽  
Dawid Zielinski ◽  
Mohd Rizal Alkahari
Keyword(s):  
Additive Manufacturing ◽  
Problem Solving ◽  
Product Design ◽  
Design For Additive Manufacturing ◽  
Technical Creativity ◽  
Design Methodologies ◽  
Creative Solutions ◽  
Design Freedom ◽  
Early Phases

Abstract The design for additive manufacturing (DFAM) processing was introduced to fully utilise the design freedom provided by additive manufacturing (AM). Consequently, appropriate design methodologies have become essential for this technology. Recently, many studies have identified the importance of DFAM method utilisation to produce AM parts, and TRIZ is a strategy used to formalise design methodologies. TRIZ is a problem-solving tool developed to assist designers to find innovative and creative solutions. However, the pathway for synergising TRIZ and DFAM is not clearly explained with respect to AM capabilities and complexities. This is mainly because most methods continue to involve use of the classical TRIZ principle, which was developed early in 1946, 40 years before AM technologies were introduced in the mid-1980s. Therefore, to tackle this issue, this study aims to enhance the 40 principles of classical TRIZ to accommodate AM design principles. A modified TRIZ-AM principle has been developed to define the pathway to AM solutions. TRIZ-AM cards are tools that assist designers to select inventive principles (IPs) in the early phases of product design and development. The case study illustrates that even inexperienced AM users can creatively design innovative AM parts.

A Design for Additive Manufacturing Ontology to Support Manufacturability Analysis

2018 ◽  
Author(s):  
Samyeon Kim ◽  
David W. Rosen ◽  
Paul Witherell ◽  
Hyunwoong Ko
Keyword(s):  
Additive Manufacturing ◽  
Design For Additive Manufacturing ◽  
Semantic Query ◽  
Ontology Language ◽  
Build Time ◽  
High Level ◽  
Design Freedom ◽  
Am Processes ◽  
Manufacturing Feature

Design for additive manufacturing (DFAM) provides design freedom for creating complex geometries and guides designers to ensure manufacturability of parts fabricated using additive manufacturing (AM) processes. However, there is a lack of formalized DFAM knowledge that provides information on how to design parts and how to plan AM processes for achieving target goals, e.g., reducing build-time. Therefore, this study presents a DFAM ontology using the web ontology language (OWL) to formalize DFAM knowledge and support queries for retrieving that knowledge. The DFAM ontology has three high level classes to represent design rules specifically: feature, parameter, and AM capability. Furthermore, the manufacturing feature concept is defined to link part design to AM process parameters. Since manufacturing features contain information on feature constraints of AM processes, the DFAM ontology supports manufacturability analysis of design features by reasoning with Semantic Query-enhanced Web Rule Language (SQWRL). The SQWRL rules in this study also help retrieve design recommendations for improving manufacturability. A case study is performed to illustrate usefulness of the DFAM ontology and SQWRL rule application. This study contributes to developing a knowledge base that can be reusable and upgradable and to analyzing manufacturing analysis to provide feedback about part designs to designers.

A Design for Additive Manufacturing Ontology to Support Manufacturability Analysis

2019 ◽  
Vol 19 (4) ◽  
Author(s):  
Samyeon Kim ◽  
David W. Rosen ◽  
Paul Witherell ◽  
Hyunwoong Ko
Keyword(s):  
Additive Manufacturing ◽  
Design For Additive Manufacturing ◽  
Design Features ◽  
Design Rules ◽  
Semantic Query ◽  
Ontology Language ◽  
Design Freedom ◽  
Am Processes ◽  
Manufacturing Feature

Design for additive manufacturing (DFAM) provides design freedom for creating complex geometries and guides designers to ensure the manufacturability of parts fabricated using additive manufacturing (AM) processes. However, there is a lack of formalized DFAM knowledge that provides information on how to design parts and how to plan AM processes for achieving target goals. Furthermore, the wide variety of AM processes, materials, and machines creates challenges in determining manufacturability constraints. Therefore, this study presents a DFAM ontology using the web ontology language (OWL) to semantically model DFAM knowledge and retrieve that knowledge. The goal of the proposed DFAM ontology is to provide a structure for information on part design, AM processes, and AM capability to represent design rules. Furthermore, the manufacturing feature concept is introduced to indicate design features that are considerably constrained by given AM processes. After developing the DFAM ontology, queries based on design rules are represented to explicitly retrieve DFAM knowledge and analyze manufacturability using Semantic Query-enhanced Web Rule Language (SQWRL). The SQWRL rules enable effective reasoning to evaluate design features against manufacturing constraints. The usefulness of the DFAM ontology is demonstrated in a case study where design features of a bracket are selected as manufacturing features based on a rule development process. This study contributes to developing a reusable and upgradable knowledge base that can be used to perform manufacturing analysis.

scholarly journals An Optimization Workflow in Design for Additive Manufacturing

2021 ◽  
Vol 11 (6) ◽  
pp. 2572
Author(s):  
Stefano Rosso ◽  
Federico Uriati ◽  
Luca Grigolato ◽  
Roberto Meneghello ◽  
Gianmaria Concheri ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Structural Optimization ◽  
Geometric Model ◽  
Complex Geometries ◽  
Design Phase ◽  
Design For Additive Manufacturing ◽  
Engineering Software ◽  
Embodiment Design ◽  
Pros And Cons

Additive Manufacturing (AM) brought a revolution in parts design and production. It enables the possibility to obtain objects with complex geometries and to exploit structural optimization algorithms. Nevertheless, AM is far from being a mature technology and advances are still needed from different perspectives. Among these, the literature highlights the need of improving the frameworks that describe the design process and taking full advantage of the possibilities offered by AM. This work aims to propose a workflow for AM guiding the designer during the embodiment design phase, from the engineering requirements to the production of the final part. The main aspects are the optimization of the dimensions and the topology of the parts, to take into consideration functional and manufacturing requirements, and to validate the geometric model by computer-aided engineering software. Moreover, a case study dealing with the redesign of a piston rod is presented, in which the proposed workflow is adopted. Results show the effectiveness of the workflow when applied to cases in which structural optimization could bring an advantage in the design of a part and the pros and cons of the choices made during the design phases were highlighted.

Development of a Design for Additive Manufacturing Worksheet for Medical Casts

2021 ◽  
Author(s):  
Heena Noh ◽  
Kijung Park ◽  
Kiwon Park ◽  
Gül E. Okudan Kremer
Keyword(s):  
Additive Manufacturing ◽  
High Strength ◽  
Design Guidelines ◽  
Operational Performance ◽  
Design For Additive Manufacturing ◽  
Trade Offs ◽  
Novice Designers ◽  
Criteria Importance ◽  
Design For Am

Abstract Traditional plaster casts often cause dermatitis due to disadvantages in usability and wearability. Additive manufacturing (AM) can fabricate customized casts to have light-weight, high strength, and better air permeability. Although existing studies have provided design for additive manufacturing (DfAM) guidelines to facilitate design applications for AM, most relevant studies focused on the mechanical properties of outputs and too general/specific design guidelines; novice designers may still have difficulty understanding trade-offs between functional and operational performance of various DfAM aspects for medical casts. As a response, this study proposes a DfAM worksheet for medical casts to effectively guide novice designers. First, important DfAM criteria and their possible solutions for medical casts are examined through a literature review to construct a basic DfAM framework for medical casts. Next, a scoring system that considers relative criteria importance and criteria evaluation from both functional and operational perspectives is developed to identify the overall suitability of a medical cast design for AM. A case study of finger cast designs was performed to identify the DfAM performance of the sample designs along with redesign requirements suggested by the worksheet. The proposed worksheet would be used to achieve rapid medical cast design by objectively assessing its suitability for AM.

Design for Additive Manufacturing in the Cloud Platform

2017 ◽  
Author(s):  
Yuanbin Wang ◽  
Robert Blache ◽  
Xun Xu
Keyword(s):  
Knowledge Management ◽  
Decision Support ◽  
Additive Manufacturing ◽  
Full Advantage ◽  
New Technologies ◽  
Design Stage ◽  
Design For Additive Manufacturing ◽  
Cloud Platform ◽  
Am Processes

Additive manufacturing (AM) has experienced a phenomenal expansion in recent years and new technologies and materials rapidly emerge in the market. Design for Additive Manufacturing (DfAM) becomes more and more important to take full advantage of the capabilities provided by AM. However, most people still have limited knowledge to make informed decisions in the design stage. Therefore, an interactive DfAM system in the cloud platform is proposed to enable people sharing the knowledge in this field and guide the designers to utilize AM efficiently. There are two major modules in the system, decision support module and knowledge management module. A case study is presented to illustrate how this system can help the designers understand the capabilities of AM processes and make rational decisions.

Design for Additive Manufacturing Inspired by TRIZ

2018 ◽  
Author(s):  
Jared Gross ◽  
Kijung Park ◽  
Gül E. Okudan Kremer
Keyword(s):  
Additive Manufacturing ◽  
Design Decision ◽  
Design For Additive Manufacturing ◽  
Specific Design ◽  
Innovative Design ◽  
Creative Solutions ◽  
Design Solutions ◽  
Manufacturing Techniques ◽  
Effective Design ◽  
Matrix Case

With the rise in popularity of additive manufacturing (AM), relevant design methodologies have become necessary for designers to reap the full benefits from this technology. TRIZ is a problem-solving tool developed to assist with innovative and creative solutions. This paper aims to create a new TRIZ matrix specifically developed for designers using additive manufacturing. The TRIZ matrix offers designers general innovative design solutions to improve specific features of a design while not sacrificing the effectiveness of other features. The proposed matrix can help effective design decision making for additive manufacturing in an early design process as well as a redesign process. Also, a design for additive manufacturing (DfAM) worksheet is provided to enable users to easily find specific design solutions for certain additive manufacturing techniques based on the general solutions derived by the TRIZ matrix. To illustrate the potential of this AM specific TRIZ matrix, case studies are presented.

An Investigation Into the Driving Factors of Creativity in Design for Additive Manufacturing

2017 ◽  
Author(s):  
Michael Barclift ◽  
Timothy W. Simpson ◽  
Maria Alessandra Nusiner ◽  
Scarlett Miller
Keyword(s):  
Additive Manufacturing ◽  
Self Report ◽  
Risk Attitudes ◽  
Design For Additive Manufacturing ◽  
Domain Specific ◽  
Common Framework ◽  
And Performance ◽  
Student Risk ◽  
Prior Experiences ◽  
Design Freedom

Additive manufacturing (AM) provides engineers with nearly unlimited design freedom, but how much do they take advantage of that freedom? The objective is to understand what factors influence a designer’s creativity and performance in Design for Additive Manufacturing (DFAM). Inspired by the popular Marshmallow Challenge, this exploratory study proposes a framework in which participants apply their DFAM skills in sketching, CAD modeling, 3D-Printing, and a part testing task. Risk attitudes are assessed through the Engineering Domain-Specific Risk-Taking (E-DOSPERT) scale, and prior experiences are captured by a self-report skills survey. Multiple regression analysis found that the average novelty of the participant’s ideas, engineering degree program, and risk seeking preference were statistically significant when predicting the performance of their ideas in AM. This study provides a common framework for AM educators to assess students’ understanding and creativity in DFAM, while also identifying student risk attitudes when conducting an engineering design task.

Modular product design for additive manufacturing of satellite components: maximising product value using genetic algorithms

2019 ◽  
Vol 27 (4) ◽  
pp. 331-346 ◽  
Author(s):  
Olivia Borgue ◽  
Massimo Panarotto ◽  
Ola Isaksson
Keyword(s):  
Additive Manufacturing ◽  
Product Design ◽  
Design Concepts ◽  
Modular Product ◽  
Trade Offs ◽  
Function Modelling ◽  
Part Consolidation ◽  
Component Interface ◽  
Optimisation Algorithms

For space manufacturers, additive manufacturing promises to dramatically reduce weight and costs by means of integral designs achieved through part consolidation. However, integrated designs hinder the ability to change and service components over time – actually increasing costs – which is instead enabled by highly modular designs. Finding the optimal trade-off between integral and modular designs in additive manufacturing is of critical importance. In this article, a product modularisation methodology is proposed for supporting such trade-offs. The methodology is based on combining function modelling with optimisation algorithms. It evaluates product design concepts with respect to product adaptability, component interface costs, manufacturing costs and cost of post-processing activities. The developed product modularisation methodology is derived from data collected through a series of workshops with industrial practitioners from three different manufacturer companies of space products. The implementation of the methodology is demonstrated in a case study featuring the redesign of a satellite antenna.

Sign in / Sign up

Export Citation Format

Share Document