scholarly journals Computational and Experimental Investigations of Straight-Through Labyrinth Seals

1997 ◽  
Author(s):  
B. V. S. S. S. Prasad ◽  
V. Sethu Manavalan ◽  
N. Nanjunda Rao
Keyword(s):  
Kinetic Energy ◽  
Flow Parameter ◽  
Static Pressure ◽  
Labyrinth Seal ◽  
Stream Line ◽  
Experimental Investigations ◽  
Leakage Flow ◽  
Line Pattern ◽  
Labyrinth Seals ◽  
Leakage Flow Rate

Computational and experimental investigations are carried out to estimate leakage flow rate in a static straight-through labyrinth seal. Tests were conducted over a range of pressure ratios, varying from 1.003 to 1.897, for three clearance values of 0.2, 0.36 and 0.6 mm respectively. The measured values of leakage flow parameter are corroborated with the results obtained from the simulations using FLUENT computer package. The agreement was within 8.6%. The flow details, e.g., the stream line pattern, velocity vectors, static pressure and turbulent kinetic energy in a typical seal passage, are presented.

Effects of Pressure Ratio and Sealing Clearance on Leakage Flow Characteristics in the Rotating Honeycomb Labyrinth Seal

2007 ◽  
Author(s):  
Jun Li ◽  
Xin Yan ◽  
Guojun Li ◽  
Zhenping Feng
Keyword(s):  
Pressure Ratio ◽  
Flow Characteristics ◽  
Labyrinth Seal ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Aerodynamic Efficiency ◽  
Flow Losses ◽  
Leakage Flow Rate ◽  
Swirl Velocity

Honeycomb stepped labyrinth seals in turbomachinery enhance aerodynamic efficiency by reducing leakage flow losses through the clearance between rotating and stationary components. The influence of pressure ratio and sealing clearance on the leakage flow characteristics in the honeycomb stepped labyrinth seal is numerically determined. The geometries investigated represent designs of the honeycomb labyrinth seal typical for modern turbomachinery. The leakage flow fields in the honeycomb and smooth stepped labyrinth seals are obtained by the Reynolds-Averaged Navier-Stokes solution using the commercial software FLUENT. Numerical simulations covered a range of pressure ratio and three sizes of sealing clearance for the honeycomb and smooth stepped labyrinth seals. The numerical discharge coefficients of the non-rotating honeycomb and smooth stepped labyrinth seals are in good agreement with previous experimental data. In addition rotational effects are also taken into account in numerical computations. The numerical results show that the leakage flow rate increases with the increasing pressure ratio at the fixed sealing clearance for the rotating and non-rotating honeycomb labyrinth seal. The influence of the sealing clearance on the leakage flow pattern for the rotating and non-rotating honeycomb labyrinth seal are observed. Moreover, the similar leakage flow rates are obtained at the same flow condition between the rotating and non-rotating honeycomb labyrinth seal due to the honeycomb acts to kill swirl velocity development for the rotating honeycomb labyrinth seal.

Effects of Mushroom-Shaped Tooth Wear on the Leakage Performance and Rotordynamic Coefficients of Labyrinth Seals

2018 ◽  
Author(s):  
Yaoxing Chen ◽  
Zhigang Li ◽  
Xin Yan ◽  
Jun Li
Keyword(s):  
Tooth Wear ◽  
Labyrinth Seal ◽  
Linear Increase ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Crossover Frequency ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Leakage Flow Rate ◽  
Mesh Technique

The leakage performance and rotordynamic coefficients of the labyrinth seal are changed when a mushroom-shaped tooth wear occurs in actual transient operation resulting from rubbing and wear between stator teeth and the rotor. The objective of current study was to numerically investigate and characterize the variation of the leakage performance and rotordynamic coefficients as a result of an increased mushroom-shaped tooth wear at two typical inlet preswirl velocities and enhance the rotor stability of the after-damage labyrinth seal. In this paper, the Unsteady Reynolds-Averaged Navier-Stokes (URANS) solution based on the multi-frequency elliptical orbit rotor whirling mode and dynamic mesh technique was used to calculate the leakage flow rates and rotordynamic coefficients of the labyrinth seal with an unworn clearance and three after-damage clearances at two inlet preswirl velocities. The accuracy and availability of adopted transient computational methods in this work were validated by the published experimental data. Also, the influence of tooth mushroom radius and each cavity in the labyrinth seal on the rotor stability and some approaches to improve the rotor stability were discussed and conducted. The conclusion shows that the leakage flow rate increases with an increase in the clearance, and a linear increase is expected when the after-damage clearance is over 0.4 mm. An increase in the after-damage clearance always leads to a drop in the effective damping or an increase in crossover frequencies. Also, the additional tooth mushroom radius plays an important role in the effective damping or crossover frequency and can not be neglected. The upstream cavity always possesses lower crossover frequency, and a drop of 9.9 Hz in the crossover frequency is found when the seal entrance axially extends 5 mm. In addition, the crossover frequency is decreased from 243.5 Hz to 164.2 Hz when typical anti-swirl brakes are installed in this labyrinth seal with the worn mushroom-shaped teeth.

scholarly journals A Study on the Leakage Characteristics of a Stepped Labyrinth Seal with a Ribbed Casing

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3719
Author(s):  
Min-Seok Hur ◽  
Seong-Won Moon ◽  
Tong-Seop Kim
Keyword(s):  
Turbine Blades ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Flow Function ◽  
Labyrinth Seals ◽  
Leakage Flow Rate ◽  
New Type ◽  
Computational Fluid Dynamics Cfd ◽  
Leakage Characteristics ◽  
Wide Operating

A new type of stepped seal with a ribbed casing is proposed to efficiently reduce the leakage at the tips of turbine blades. The leakage characteristics of two different types of labyrinth seals (conventional seal vs. ribbed seal) were compared and analyzed through computational fluid dynamics (CFD) in a wide operating range of pressure ratios and clearances. The analysis showed that the ribbed seal has superior leakage performance to the conventional seal at all clearance sizes. With the same clearance size (S/H = 1.0), the flow function of the ribbed seal was approximately 21.5–42.6% less than that of the conventional seal. Also, different trends of variation in the flow function according to the increase of the clearance were found between the conventional and ribbed seals. The leakage flow inside the labyrinth seal was analyzed to explain the cause of this difference in tendency, and it was confirmed that the added ribs cause collision between the leakage flow and the tooth wall, even with the increase of the clearance. Also, the ribbed seal enables operation at a larger clearance with the same leakage performance when comparing the absolute leakage flow rate of the two seals. In addition, a parametric study on the influence of the rib height and rib inclination angle revealed that the flow function generally decreases as both parameters increase.

Effects of Pressure Ratio and Fin Pitch on Leakage Flow Characteristics in High Rotating Labyrinth Seals

2006 ◽  
Author(s):  
Jun Li ◽  
Xin Yan ◽  
Zhenping Feng
Keyword(s):  
Flow Rate ◽  
Geometrical Structure ◽  
Pressure Ratio ◽  
Flow Characteristics ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Rotational Axis ◽  
Labyrinth Seals ◽  
Sealing Performance ◽  
Leakage Flow Rate

Labyrinth seals represent an important flow element in the sealing equipment of modern turbomachinery industries. The straight-through and stepped labyrinth seal are widely used in modern steam turbine due to their comparable simple structure and low manufactured costs. The influence of pressure ratio and fin pitch on the leakage flow characteristics of the straight-through and stepped labyrinth seals is numerically determined. The pressure ratio is defined as the outlet static pressure divided by the inlet total pressure. The fin pitch varied in the fixed axial distance of the labyrinth seal. The geometries investigated represent designs of the straight-through and stepped labyrinth seal typical for modern steam turbines. The leakage flow fields in the high rotating straight-through and stepped labyrinth seals are obtained by the Reynolds-Averaged Navier-Stokes solution using the commercial software FLUENT with the fixed seal clearance and fins geometrical structure. The effect of the rotational axis is also taken into account in numerical computations. Numerical simulations covered a range of pressure ratio and fin pitch for the straight-through and stepped labyrinth seals. Dimensionless discharge coefficients, describing the sealing performance, are calculated from the simulation results. The numerical results show that pressure ratio and fin pitch both affects the sealing performance with the fixed seal clearance and fin geometrical structure. The leakage flow rate decreases with the decreasing fin pitch for both the straight-through and stepped labyrinth seal at the fixed pressure ratio. Furthermore, the leakage flow rate decreases with the increasing pressure ratio at the fixed fin pitch for two kinds of labyrinth seals in the present study. This research provides technical support for improved design of labyrinth seals in turbomachinery.

Influence of a Honeycomb Facing on the Flow Through a Stepped Labyrinth Seal

2000 ◽  
Vol 124 (1) ◽  
pp. 140-146 ◽  
Author(s):  
V. Schramm ◽  
K. Willenborg ◽  
S. Kim ◽  
S. Wittig
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Theoretical Work ◽  
Labyrinth Seal ◽  
Honeycomb Structure ◽  
Experimental Investigations ◽  
Labyrinth Seals ◽  
Numerical Predictions ◽  
Flow Through ◽  
Aero Engines

This paper reports numerical predictions and measurements of the flow field in a stepped labyrinth seal. The theoretical work and the experimental investigations were successfully combined to gain a comprehensive understanding of the flow patterns existing in such elements. In order to identify the influence of the honeycomb structure, a smooth stator as well as a seal configuration with a honeycomb facing mounted on the stator wall were investigated. The seal geometry is representative of typical three-step labyrinth seals of modern aero engines. The flow field was predicted using a commercial finite volume code with the standard k-ε turbulence model. The computational grid includes the basic seal geometry as well as the three-dimensional honeycomb structures.

Theoretical leakage equations towards liquid-phase flow in the straight-through labyrinth seal

2021 ◽  
pp. 1-44
Author(s):  
Lingsheng Han ◽  
Yongqing Wang ◽  
Kuo Liu ◽  
Ziyou Ban ◽  
Bo Qin ◽  
...  
Keyword(s):  
Liquid Phase ◽  
Numerical Approach ◽  
Labyrinth Seal ◽  
Resistance Coefficient ◽  
Cryogenic Cooling ◽  
Geometrical Parameters ◽  
Phase Flow ◽  
Labyrinth Seals ◽  
Leakage Flow Rate ◽  
Empirical Coefficients

Abstract Labyrinth seals are widely applied in turbomachinery for gas and liquid sealing. A series of labyrinth seal leakage equations so far have been proposed for compressible gas, but few equations for incompressible liquid. Based on the flow conserving governing equations, this paper originally presents semi-empirical analytic equations of the leakage flow rate and tooth-clearance pressure for liquid-phase flow in the straight-through labyrinth seal. The equations indicate that the leakage and pressure are closely related to the inlet pressure, outlet pressure, seal geometrical parameters and four empirical coefficients, whilst no relation to the temperature and compressibility effects compared to the common gas equations. The empirical coefficients include the velocity compensation coefficient, friction coefficient, jet contraction coefficient and resistance coefficient. Particularly, the velocity compensation coefficient is determined through an optimization by the genetic algorithm, while others are referred from previous research. Ultimately, taking the sealing of deeply subcooled liquid nitrogen within the spindle of the cryogenic cooling machine tool as a case, the accuracy of proposed equations is evaluated under various pressure ratios and geometry conditions using the numerical approach, whose numerical model has been validated by the experimental data in the literature. The results show that errors between calculation and simulation are generally within the limit of ±5%, except for the pressure values at the first two teeth. This work provides a theoretical basis for further studies on the liquid leakage equations in other labyrinth seal types.

scholarly journals Leakage Characteristic Identification of Labyrinth Seals on Reciprocating Piston through Transient Simulations

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Lingzi Wang ◽  
Jianmei Feng ◽  
Mingfeng Wang ◽  
Zenghui Ma ◽  
Xueyuan Peng
Keyword(s):  
Flow Rate ◽  
Pressure Ratio ◽  
Piston Compressor ◽  
Pressure Change ◽  
Labyrinth Seal ◽  
Relative Molecular Mass ◽  
Geometrical Parameters ◽  
Leakage Flow ◽  
Reciprocating Motion ◽  
Leakage Flow Rate

In the reciprocating labyrinth piston compressor, the characteristic of the internal leakage is crucial for the leakage management and performance improvement of the compressor. However, most of the published studies investigated the rotor-stator system, and those who study the reciprocating piston-cylinder system basically focus on the effects of the geometrical parameters. These conclusions could not directly be applied to predict the real-time leakage flow rate through the labyrinth seal because of the fast reciprocating motion of the piston, which will cause continually pressure change in two compression chambers, and then the pressure fluctuation will affect the flow through the labyrinth seal. A transient simulation model employing the multiscale dynamic mesh, which considers the effect of the reciprocating motion of the piston in the cylinder, is established to identify the characteristics of the internal leakage. This model was verified by a specially designed compressor, and the influence of various parameters was analyzed in detail. The sealing performance decreased linearly with the increase in the pressure ratio, and higher pressure inlet leads to higher leakage flow under the same pressure ratio. The labyrinth seal performance positively correlated to the increase of the rotational speed. Leakage characteristics of five working mediums were carried out, and the results indicated that the relative leakage decreased with an increase in the relative molecular mass. From this study, the realistic internal leakage flow rate under different operating parameters in the reciprocating labyrinth piston compressor could be predicated.

A CFD Study on the Dynamic Coefficients of Labyrinth Seals

2012 ◽  
Author(s):  
Donghui Zhang ◽  
Chester Lee ◽  
Michael Cave
Keyword(s):  
High Speed ◽  
Fluid Dynamic ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Labyrinth Seals ◽  
Dynamic Coefficients ◽  
Rotating Impeller ◽  
Coupling Stiffness ◽  
Direct Stiffness ◽  
Compressor Efficiency

Labyrinth seals are widely used in gas compressors to reduce internal leakage and increase the compressor efficiency. Due to the eccentricity between the rotating impeller and the stationary part as *well as the shaft whirling motion, forces are generated when the leakage flow passing through the cavities and the seals. For a lot of applications with high speed and pressure, these forces can drive the system unstable. Thus, predicting the forces accurately become a very important for compressor rotordynamic designs. A lot of research and studies has been done to the seals itself, including bulk flow method, computational fluid dynamic (CFD) and test measurement. The seal and leakage flow interaction forces can be predicted relatively accurate. But very few research treat the seal and cavities as one component interacting with the leakage flow and produce the forces. This paper presents results of CFD investigations on the dynamic coefficients of one typical impeller eye seal and front cavity. The CFD results show that large forces are generated in the front cavity due to circumferential uniform pressure distribution, which caused by the downstream labyrinth seal. The forces generated in the front cavity are more than in the front seal. It was found that the inertia, damping, and stiffness are proportional to average pressure. The cross-coupling stiffness increases with speed with power of 2 while the direct stiffness increases with speed with power of about 1.7.

Numerical Comparison of Leakage Flow and Rotordynamic Characteristics for Two Types of Labyrinth Seals With Baffles

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Yuanqiao Zhang ◽  
Jun Li ◽  
Zhigang Li ◽  
Xin Yan
Keyword(s):  
Rotational Speed ◽  
Flow Resistance ◽  
Labyrinth Seal ◽  
Leakage Flow ◽  
Numerical Comparison ◽  
Vibration Frequencies ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Brush Seal ◽  
Swirl Intensity

Abstract Cavity separation baffles can decrease the circumferential swirl intensity of labyrinth seals and increase the seals' rotordynamic characteristics. Compared with conventional baffles, the bristle packs of brush seal baffles can contact the rotor directly, thereby further reducing the swirl intensity of the seal cavity. This paper, using the numerical model combining a multifrequency elliptical whirling orbit model, a porous medium model, and transient Reynolds-averaged Navier–Stokes (RANS) solutions, compares the leakage flow and rotordynamic characteristics of a labyrinth seal with brush-seal baffles (LSBSB) and a labyrinth seal with conventional baffles (LSCB). Ideal air flows into the seal at an inlet preswirl velocity of 0 m/s (or 60 m/s or 100 m/s), total pressure of 690 kPa, and temperature of 14 °C. The outlet static pressure is 100 kPa and the rotational speed is 7500 r/min (surface speed of 66.8 m/s) or 15,000 r/min (surface speed of 133.5 m/s). Numerical results show that the LSBSB possesses the slightly less leakage flow rate than the LSCB due to the flow resistance of the bristle pack to the fluid. Compared with the LSCB, the LSBSB shows a higher positive effective stiffness (Keff) at all considered vibration frequencies and a higher effective damping (Ceff) for most vibration frequencies. What is more, the crossover frequency (fc0) of the LSBSB is significantly lower than that of the LSCB, which means that the LSBSB has a wider frequency range offering positive effective damping. The increasing inlet preswirl velocity and rotational speed only slightly affect the Keff for both seals. The Ceff of two seals decreases as the inlet preswirl velocity rises, especially for the LSCB. The Ceff of the LSCB slightly decreases because of the increasing rotational speed. In contrast, the Ceff of the LSBSB is not sensitive to the changes in rotational speed. In a word, the LSBSB possesses superior rotordynamic performance to the LSCB. Note that this work also investigates the leakage flow and rotordynamic characteristics a labyrinth seal with inclined baffles (LSIB) under the condition of u0 = 60 m/s and n = 15,000 r/min. The inclined baffles of the LSIB are same as the backing plates of LSBSB baffles. The LSIB has rotordynamic coefficients almost equal to the LSCB. Hence, the reason why the LSBSB possesses better rotordynamic performance than that of the LSCB is the flow resistance of bristle packs of brush seal baffles, not the inclination direction variation of baffles.

Effects of Labyrinth Fin Wear on Aerodynamic Performance of Turbine Stages: Part I — Bending Damages

2019 ◽  
Author(s):  
Xin Yan ◽  
Xinbo Dai
Keyword(s):  
Labyrinth Seal ◽  
Flow Fields ◽  
Aerodynamic Performance ◽  
Leakage Flow ◽  
Original Design ◽  
Labyrinth Seals ◽  
Sealing Performance ◽  
Forward Bending ◽  
Design Case ◽  
Isentropic Efficiency

Abstract Labyrinth seals are widely applied in turbo machines because of their geometrical simplicity, convenient installation, reliable operation and excellent sealing performance. However, in realistic operation process, they usually encounter transient conditions (starting-up, shutting down, etc.) and unavoidable vibrations, which may cause wear in the labyrinth fins. After rubbing, the sealing performance of labyrinth seal will be varied in contrast to the original design. Correspondingly, the aerodynamic efficiency of the turbine stage will be affected by the variation of leakage flow in rubbing process. However, in published literature with respect to the labyrinth seal wear, most of the attention has been paid on revealing sealing performance degradation of labyrinth seal itself. Few studies have been concentrated on the influence of labyrinth seal wear on aerodynamic performance of turbine stages. In such background, the present paper utilizes the numerical methods to investigate the effects of labyrinth seal bending damages on aerodynamic performance of turbine stages. Firstly, under several assumptions, the bending geometrical model was established to describe different degrees of bending damages. Secondly, using three-dimensional RANS simulations, the effects of effective clearance variation due to bending on leakage flow and flow fields in turbine stages were investigated. The overall performance of the turbine stages with teeth-bending damages was also compared with the original design case. The influence of the forward bending and backward bending of labyrinth seals were analyzed and compared with each other. The total-total isentropic efficiency of turbine stages, leakage rates, outlet flow angles, reaction degrees and profile static pressure distributions, entropic distributions and flow fields in seals were obtained and compared to the original design case. The results indicate that the leakage rates in the worn labyrinth seal are quite relevant to the effective clearance, especially for the backward bending damages. As the effective clearances in backward bending cases are increased by 0.2–0.6mm, the isentropic efficiency of turbine stages is decreased by about 1–2%. However, for the forward bending damages, the aerodynamic performance and leakage rates in turbine stages are not sensitive to the effective clearance.

Sign in / Sign up

Export Citation Format

Share Document