Computational Analysis of Noise Sources Inside the High Speed Flow Over a Bump

2007 ◽  
Author(s):  
Kentaro Okamoto ◽  
Taku Nonomura ◽  
Kozo Fujii
Keyword(s):  
Boundary Layer ◽  
Flow Field ◽  
High Speed ◽  
Three Dimensional ◽  
Aerodynamic Noise ◽  
Stream Line ◽  
Noise Sources ◽  
Bump Height ◽  
Speed Flow ◽  
Low Pass

The aerodynamic noise sources around the three dimensional bump are studied. In this search, pressure fluctuation on the wall which effects interior noise is searched using ILES. The ratio of the bump diameter (D) and height (H) is D/H = 4. In front of the bump, the boundary layer thickness is half of the bump height. Reynolds number based on the bump height was 65000 and the free stream Mach number is 0.1. In flow boundary layer profile is given by using rescaling method and the laminar boundary layer is changed into turbulent boundary layer. Sixth-order-accurate compact scheme is used to represent spatial derivatives and six-order low pass spatial filtering procedure is utilized for removing numerical oscillations. First, instantaneous flow field is discussed. Second, characteristics of time average flow field, such as Cp distribution and stream line topology, are discussed. Third, spanwise velocity fluctuation and sound pressure level on the wall are discussed.

scholarly journals Characteristics and Mechanism Analysis of Aerodynamic Noise Sources for High-Speed Train in Tunnel

Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-19 ◽  
Author(s):  
Xiao-Ming Tan ◽  
Hui-fang Liu ◽  
Zhi-Gang Yang ◽  
Jie Zhang ◽  
Zhong-gang Wang ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Flow Field ◽  
Sound Source ◽  
High Speed ◽  
Spectral Characteristics ◽  
Oscillation Mode ◽  
Scale Model ◽  
Aerodynamic Noise ◽  
High Speed Train ◽  
Noise Sources

We aim to study the characteristics and mechanism of the aerodynamic noise sources for a high-speed train in a tunnel at the speeds of 50 m/s, 70 m/s, 83 m/s, and 97 m/s by means of the numerical wind tunnel model and the nonreflective boundary condition. First, the large eddy simulation model was used to simulate the fluctuating flow field around a 1/8 scale model of a high-speed train that consists of three connected vehicles with bogies in the tunnel. Next, the spectral characteristics of the aerodynamic noise source for the high-speed train were obtained by performing a Fourier transform on the fluctuating pressure. Finally, the mechanism of the aerodynamic noise was studied using the sound theory of cavity flow and the flow field structure. The results show that the spectrum pattern of the sound source energy presented broadband and multipeak characteristics for the high-speed train. The dominant distribution frequency range is from 100 Hz to 4 kHz for the high-speed train, accounting for approximately 95.1% of the total sound source energy. The peak frequencies are 400 Hz and 800 Hz. The sound source energy at 400 Hz and 800 Hz is primarily from the bogie cavities. The spectrum pattern of the sound source energy has frequency similarity for the bottom structure of the streamlined part of the head vehicle. The induced mode of the sound source energy is probably the dynamic oscillation mode of the cavity and the resonant oscillation mode of the cavity for the under-car structure at 400 Hz and 800 Hz, respectively. The numerical computation model was checked by the wind tunnel test results.

Effects of Inlet Distortion on the Flow Field in a Transonic Compressor Rotor

1996 ◽  
Author(s):  
Chunill Hah ◽  
Douglas C. Rabe ◽  
Thomas J. Sullivan ◽  
Aspi R. Wadia
Keyword(s):  
Boundary Layer ◽  
Flow Field ◽  
Viscous Flow ◽  
Total Pressure ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Aerodynamic Loss ◽  
Transonic Compressor ◽  
Inlet Distortion ◽  
Compressor Rotor

The effects of circumferential distortions in inlet total pressure on the flow field in a low-aspect-ratio, high-speed, high-pressure-ratio, transonic compressor rotor are investigated in this paper. The flow field was studied experimentally and numerically with and without inlet total pressure distortion. Total pressure distortion was created by screens mounted upstream from the rotor inlet. Circumferential distortions of 8 periods per revolution were investigated at two different rotor speeds. The unsteady blade surface pressures were measured with miniature pressure transducers mounted in the blade. The flow fields with and without inlet total pressure distortion were analyzed numerically by solving steady and unsteady forms of the Reynolds-averaged Navier-Stokes equations. Steady three-dimensional viscous flow calculations were performed for the flow without inlet distortion while unsteady three-dimensional viscous flow calculations were used for the flow with inlet distortion. For the time-accurate calculation, circumferential and radial variations of the inlet total pressure were used as a time-dependent inflow boundary condition. A second-order implicit scheme was used for the time integration. The experimental measurements and the numerical analysis are highly complementary for this study because of the extreme complexity of the flow field. The current investigation shows that inlet flow distortions travel through the rotor blade passage and are convected into the following stator. At a high rotor speed where the flow is transonic, the passage shock was found to oscillate by as much as 20% of the blade chord, and very strong interactions between the unsteady passage shock and the blade boundary layer were observed. This interaction increases the effective blockage of the passage, resulting in an increased aerodynamic loss and a reduced stall margin. The strong interaction between the passage shock and the blade boundary layer increases the peak aerodynamic loss by about one percent.

The Effects of Inlet Boundary Layer Condition and Periodically Incoming Wakes on Secondary Flow in a Low Pressure Turbine Cascade

2020 ◽  
Author(s):  
Tobias Schubert ◽  
Silvio Chemnitz ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Secondary Flow ◽  
High Speed ◽  
Low Pressure ◽  
Experimental Investigations ◽  
Turbine Cascade ◽  
Flow Conditions ◽  
Low Pressure Turbine ◽  
Speed Flow ◽  
Unsteady Inflow

Abstract A particular turbine cascade design is presented with the goal of providing a basis for high quality investigations of endwall flow at high-speed flow conditions and unsteady inflow. The key feature of the design is an integrated two-part flat plate serving as a cascade endwall at part-span, which enables a variation of the inlet endwall boundary layer conditions. The new design is applied to the T106A low pressure turbine cascade for endwall flow investigations in the High-Speed Cascade Wind Tunnel of the Institute of Jet Propulsion at the Bundeswehr University Munich. Measurements are conducted at realistic flow conditions (M2th = 0.59, Re2th = 2·105) in three cases of different endwall boundary layer conditions with and without periodically incoming wakes. The endwall boundary layer is characterized by 1D-CTA measurements upstream of the blade passage. Secondary flow is evaluated by Five-hole-probe measurements in the turbine exit flow. A strong similarity is found between the time-averaged effects of unsteady inflow conditions and the effects of changing inlet endwall boundary layer conditions regarding the attenuation of secondary flow. Furthermore, the experimental investigations show, that all design goals for the improved T106A cascade are met.

scholarly journals Numerical and Experimental Study of Flow Field between the Main Hull and Demi-Hull of a Trimaran

2020 ◽  
Vol 8 (12) ◽  
pp. 975
Author(s):  
Cong Sun ◽  
Chunyu Guo ◽  
Chao Wang ◽  
Lianzhou Wang ◽  
Jianfeng Lin
Keyword(s):  
Flow Field ◽  
High Speed ◽  
Light Transmission ◽  
Transmission Rate ◽  
Laser Sheet ◽  
Three Dimensional ◽  
Wake Flow ◽  
Navier Stokes ◽  
Unsteady Wake ◽  
Real Flow

The interactions between the main hull and demi-hull of trimarans have been arousing increasing attention, and detailed circumferential flow fields greatly influence trimaran research. In this research, the unsteady wake flow field of a trimaran was obtained by Reynolds-Averaged Navier-Stokes (RANS) equations on the basis of the viscous flow principles with consideration of the heaving and pitching of the trimaran. Then, we designed an experimental method based on particle-image velocimetry (PIV) and obtained a detailed flow field between the main hull and demi-hull of the trimaran. A trimaran model with one demi-hull made of polycarbonate material with 90% light transmission rate and a refractive index 1.58 (close to that of water 1.33) was manufactured as the experiment sample. Using polycarbonate material, the laser-sheet light-source transmission and high-speed camera recording problems were effectively rectified. Moreover, a nonstandard calibration was added into the PIV flow field measurement system. Then, we established an inverse three-dimensional (3D) distortion coordinate system and obtained the corresponding coordinates by using optics calculations. Further, the PIV system spatial mapping was corrected, and the real flow field was obtained. The simulation results were highly consistent with the experimental data, which showed the methods established in this study provided a strong reference for obtaining the detailed flow field information between the main hull and demi-hull of trimarans.

scholarly journals Numerical simulation of the dimensional transformation of atomization in a supersonic aerodynamic atomization dust-removing nozzle based on transonic speed compressible flow

2020 ◽  
Vol 7 (3) ◽  
pp. 597-610 ◽  
Author(s):  
Tian Zhang ◽  
Deji Jing ◽  
Shaocheng Ge ◽  
Jiren Wang ◽  
Xiangxi Meng ◽  
...  
Keyword(s):  
Flow Field ◽  
Axisymmetric Flow ◽  
Three Dimensional ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Three Dimensional Model ◽  
Speed Flow ◽  
Complex Process ◽  
Study Results ◽  
Laval Nozzles

Abstract To simulate the transonic atomization jet process in Laval nozzles, to test the law of droplet atomization and distribution, to find a method of supersonic atomization for dust-removing nozzles, and to improve nozzle efficiency, the finite element method has been used in this study based on the COMSOL computational fluid dynamics module. The study results showed that the process cannot be realized alone under the two-dimensional axisymmetric, three-dimensional and three-dimensional symmetric models, but it can be calculated with the transformation dimension method, which uses the parameter equations generated from the two-dimensional axisymmetric flow field data of the three-dimensional model. The visualization of this complex process, which is difficult to measure and analyze experimentally, was realized in this study. The physical process, macro phenomena and particle distribution of supersonic atomization are analyzed in combination with this simulation. The rationality of the simulation was verified by experiments. A new method for the study of the atomization process and the exploration of its mechanism in a compressible transonic speed flow field based on the Laval nozzle has been provided, and a numerical platform for the study of supersonic atomization dust removal has been established.

Boundary Layers and Skin Friction in High-Speed Flow

1951 ◽  
Vol 55 (485) ◽  
pp. 285-302 ◽  
Author(s):  
A. D. Young
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
High Speed ◽  
Scale Effects ◽  
Practical Interest ◽  
High Speed Flow ◽  
High Speeds ◽  
Speed Flow ◽  
The Subject ◽  
Small Disturbances

SummaryIn this paper an attempt is made to review present knowledge of the subject of boundary layers at high speeds, without delving too deeply into the theory, and to draw attention to the results of practical interest. The introductory remarks describe broadly the special features of boundary layers in compressible flow, namely the existence of both thermal and velocity layers and their interdependence, the sensitivity of the external flow to the layers, and their inter-action with shock waves. The results of importance arising from the theory of the laminar boundary layer and of its stability to small disturbances are then discussed, followed by a summary of the present inadequate state of knowledge of turbulent boundary layer characteristics. It is noted that progress in the latter must await the production of more experimental data. The paper concludes with a discussion of scale effects and the allied problem of boundary layer—shock wave inter-action.

Darryl E. Metzger Memorial Session Paper: Comparison of Calculated and Measured Heat Transfer Coefficients for Transonic and Supersonic Boundary-Layer Flows

1995 ◽  
Vol 117 (2) ◽  
pp. 248-254 ◽  
Author(s):  
C. Hu¨rst ◽  
A. Schulz ◽  
S. Wittig
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Reynolds Number ◽  
High Speed ◽  
Three Dimensional ◽  
Supersonic Boundary Layer ◽  
Nozzle Wall ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Three Dimensional Finite Element

The present study compares measured and computed heat transfer coefficients for high-speed boundary layer nozzle flows under engine Reynolds number conditions (U∞=230 ÷ 880 m/s, Re* = 0.37 ÷ 1.07 × 106). Experimental data have been obtained by heat transfer measurements in a two-dimensional, nonsymmetric, convergent–divergent nozzle. The nozzle wall is convectively cooled using water passages. The coolant heat transfer data and nozzle surface temperatures are used as boundary conditions for a three-dimensional finite-element code, which is employed to calculate the temperature distribution inside the nozzle wall. Heat transfer coefficients along the hot gas nozzle wall are derived from the temperature gradients normal to the surface. The results are compared with numerical heat transfer predictions using the low-Reynolds-number k–ε turbulence model by Lam and Bremhorst. Influence of compressibility in the transport equations for the turbulence properties is taken into account by using the local averaged density. The results confirm that this simplification leads to good results for transonic and low supersonic flows.

Sign in / Sign up

Export Citation Format

Share Document