Coupled Aero-Thermal Modeling of a Rotating Cavity With Radial Inflow

2015 ◽  
Author(s):  
Zixiang Sun ◽  
Dario Amirante ◽  
John W. Chew ◽  
Nicholas J. Hills
Keyword(s):  
Response Times ◽  
Thermal Response ◽  
Turbulence Models ◽  
Cfd Modelling ◽  
Sector Model ◽  
Eddy Simulation ◽  
Cfd Models ◽  
Rotating Cavity ◽  
Blade Clearance ◽  
Coupled Solution

Flow and heat transfer in an aero-engine compressor disc cavity with radial inflow has been studied using computational fluid dynamics (CFD), large eddy simulation (LES) and coupled fluid/solid modelling. Standalone CFD investigations were conducted using a set of popular turbulence models along with 0.2° axisymmetric and a 22.5° discrete sector CFD models. The overall agreement between the CFD predictions is good, and solutions are comparable to an established integral method solution in the major part of the cavity. The LES simulation demonstrates that flow unsteadiness in the cavity due to the unstable thermal stratification is largely suppressed by the radial inflow. Steady flow CFD modelling using the axisymmetric sector model and the Spalart-Allmaras turbulence model was coupled with a finite element (FE) thermal model of the rotating cavity. Good agreement was obtained between the coupled solution and rig test data in terms of metal temperature. Analysis confirms that use of a small radial bleed flow in compressor cavities is effective in reducing thermal response times for the compressor discs and that this could be applied in management of compressor blade clearance.

Coupled Aerothermal Modeling of a Rotating Cavity With Radial Inflow

2015 ◽  
Vol 138 (3) ◽  
Author(s):  
Zixiang Sun ◽  
Dario Amirante ◽  
John W. Chew ◽  
Nicholas J. Hills
Keyword(s):  
Response Times ◽  
Thermal Response ◽  
Turbulence Models ◽  
Cfd Modeling ◽  
Sector Model ◽  
Eddy Simulation ◽  
Cfd Models ◽  
Rotating Cavity ◽  
Blade Clearance ◽  
Coupled Solution

Flow and heat transfer in an aero-engine compressor disk cavity with radial inflow has been studied using computational fluid dynamics (CFD), large eddy simulation (LES), and coupled fluid/solid modeling. Standalone CFD investigations were conducted using a set of popular turbulence models along with 0.2 deg axisymmetric and a 22.5 deg discrete sector CFD models. The overall agreement between the CFD predictions is good, and solutions are comparable to an established integral method solution in the major part of the cavity. The LES simulation demonstrates that flow unsteadiness in the cavity due to the unstable thermal stratification is largely suppressed by the radial inflow. Steady flow CFD modeling using the axisymmetric sector model and the Spalart–Allmaras turbulence model was coupled with a finite element (FE) thermal model of the rotating cavity. Good agreement was obtained between the coupled solution and rig test data in terms of metal temperature. Analysis confirms that using a small radial bleed flow in compressor cavities is effective in reducing thermal response times for the compressor disks and that this could be applied in management of compressor blade clearance.

Evaluation and application of advanced CFD models for rotating disc flows

2021 ◽  
pp. 095440622110138
Author(s):  
Feng Gao ◽  
John W Chew
Keyword(s):  
Large Eddy Simulation ◽  
Turbulence Models ◽  
Published Data ◽  
Complex Flows ◽  
Rotating Disc ◽  
Eddy Simulation ◽  
Cfd Models ◽  
Turbulent Transition ◽  
Large Eddy ◽  
Buoyancy Driven Convection

This paper addresses limitations of widely used Reynolds-averaged turbulence models (RANS) for prediction of gas turbine internal air systems. Results from direct numerical simulation (DNS), wall-resolved large-eddy simulation (LES), wall-modelled large-eddy simulation (WMLES), and RANS for benchmark test cases are compared. For rotor-stator disc cavity flows results for mean velocities, velocity fluctuations, rotor torque and laminar-turbulent transition are considered and compared with published data. For cavities between co-rotating discs attention is focused on buoyancy-driven convection in the centrifugal force field. It is concluded that WMLES is suitable for application in engine conditions, offering better accuracy than RANS in some critical applications. This confirms recently published results for turbine rim sealing and is further illustrated by application to convection in a sealed cavity at higher Rayleigh number than is practical with DNS or wall-resolved LES. The results show that the approximate near-wall treatment gives reasonable results for complex flows and extend previous studies to higher speed rig conditions where Eckert number effects become significant.

scholarly journals Comparative Study of Different Turbulence Models for Cavitational Flows around NACA0012 Hydrofoil

2021 ◽  
Vol 9 (7) ◽  
pp. 742
Author(s):  
Minsheng Zhao ◽  
Decheng Wan ◽  
Yangyang Gao
Keyword(s):  
Angle Of Attack ◽  
Large Angle ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Specific Information ◽  
Cloud Cavitation ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Shedding Frequency ◽  
Reynolds Average

The present work focuses on the comparison of the numerical simulation of sheet/cloud cavitation with the Reynolds Average Navier-Stokes and Large Eddy Simulation(RANS and LES) methods around NACA0012 hydrofoil in water flow. Three kinds of turbulence models—SST k-ω, modified SST k-ω, and Smagorinsky’s model—were used in this paper. The unstable sheet cavity and periodic shedding of the sheet/cloud cavitation were predicted, and the simulation results, namelycavitation shape, shedding frequency, and the lift and the drag coefficients of those three turbulence models, were analyzed and compared with each other. The numerical results above were basically in accordance with experimental ones. It was found that the modified SST k-ω and Smagorinsky turbulence models performed better in the aspects of cavitation shape, shedding frequency, and capturing the unsteady cavitation vortex cluster in the developing and shedding period of the cavitation at the cavitation number σ = 0.8. At a small angle of attack, the modified SST k-ω model was more accurate and practical than the other two models. However, at a large angle of attack, the Smagorinsky model of the LES method was able to give specific information in the cavitation flow field, which RANS method could not give. Further study showed that the vortex structure of the wing is the main cause of cavitation shedding.

scholarly journals Large Eddy Simulation of Film Cooling Involving Compound Angle Holes: Comparative Study of LES and RANS

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 198
Author(s):  
Seung Il Baek ◽  
Joon Ahn
Keyword(s):  
Large Eddy Simulation ◽  
Film Cooling ◽  
Orientation Angle ◽  
Turbulence Models ◽  
Film Cooling Effectiveness ◽  
Injection Angle ◽  
Blowing Ratio ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Compound Angle

A large eddy simulation (LES) was performed for film cooling in the gas turbine blade involving spanwise injection angles (orientation angles). For a streamwise coolant injection angle (inclination angle) of 35°, the effects of the orientation angle were compared considering a simple angle of 0° and 30°. Two ratios of the coolant to main flow mass flux (blowing ratio) of 0.5 and 1.0 were considered and the experimental conditions of Jung and Lee (2000) were adopted for the geometry and flow conditions. Moreover, a Reynolds averaged Navier–Stokes simulation (RANS) was performed to understand the characteristics of the turbulence models compared to those in the LES and experiments. In the RANS, three turbulence models were compared, namely, the realizable k-ε, k-ω shear stress transport, and Reynolds stress models. The temperature field and flow fields predicted through the RANS were similar to those obtained through the experiment and LES. Nevertheless, at a simple angle, the point at which the counter-rotating vortex pair (CRVP) collided on the wall and rose was different from that in the experiment and LES. Under the compound angle, the point at which the CRVP changed to a single vortex was different from that in the LES. The adiabatic film cooling effectiveness could not be accurately determined through the RANS but was well reflected by the LES, even under the compound angle. The reattachment of the injectant at a blowing ratio of 1.0 was better predicted by the RANS at the compound angle than at the simple angle. The temperature fluctuation was predicted to decrease slightly when the injectant was supplied at a compound angle.

scholarly journals Measurement of flow velocity profiles in tank structures using the prototype device OCM Pro LR

2011 ◽  
Vol 64 (1) ◽  
pp. 263-270 ◽  
Author(s):  
K. Klepiszewski ◽  
M. Teufel ◽  
S. Seiffert ◽  
E. Henry
Keyword(s):  
Flow Velocity ◽  
Large Scale ◽  
Fluid Dynamic ◽  
Waste Water Treatment ◽  
Transport Processes ◽  
Treatment Efficiency ◽  
Cleaning Efficiency ◽  
Cfd Modelling ◽  
Ultrasonic Signals ◽  
Cfd Models

Generally, studies investigating the treatment efficiency of tank structures for storm water or waste water treatment observe pollutant flows in connection with conditions of hydraulic loading. Further investigations evaluate internal processes in tank structures using computational fluid dynamic (CFD) modelling or lab scale tests. As flow paths inside of tank structures have a considerable influence on the treatment efficiency, flow velocity profile (FVP) measurements can provide a possibility to calibrate CFD models and contribute to a better understanding of pollutant transport processes in these structures. This study focuses on tests carried out with the prototype FVP measurement device OCM Pro LR by NIVUS in a sedimentation tank with combined sewer overflow (CSO) situated in Petange, Luxembourg. The OCM Pro LR measurement system analyses the echo of ultrasonic signals of different flow depths to get a detailed FVP. A comparison of flow velocity measured by OCM Pro LR with a vane measurement showed good conformity. The FVPs measured by OCM Pro LR point out shortcut flows within the tank structure during CSO events, which could cause a reduction of the cleaning efficiency of the structure. The results prove the applicability of FVP measurements in large-scale structures.

Large Eddy Simulations of a Hydrocyclone

2002 ◽  
Author(s):  
Francisco Jose´ de Souza ◽  
Aristeu Silveira Neto
Keyword(s):  
Turbulence Models ◽  
Fluid Flows ◽  
Scale Model ◽  
Staggered Grid ◽  
Subgrid Scale ◽  
Step Method ◽  
Fractional Step Method ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Subgrid Scale Modeling

Subgrid-scale modeling, which characterizes Large Eddy Simulation (LES), has been used to predict the behavior of a water-fed hydrocyclone operating without an air core. The governing equations were solved by a fractional step method on a staggered grid. The Smagorinsky subgrid-scale model was employed to account for turbulent effects. Numerical results actually capture the main features of the flow pattern and agree reasonably well with experiments, suggesting that LES represents an interesting alternative to classical turbulence models when applied to the numerical solution of fluid flows within hydrocyclones.

scholarly journals An Arbitrary Hybrid Turbulence Modeling Approach for Efficient and Accurate Automotive Aerodynamic Analysis and Design Optimization

Fluids ◽  
2021 ◽  
Vol 6 (11) ◽  
pp. 407
Author(s):  
Saule Maulenkul ◽  
Kaiyrbek Yerzhanov ◽  
Azamat Kabidollayev ◽  
Bagdaulet Kamalov ◽  
Sagidolla Batay ◽  
...  
Keyword(s):  
Flow Field ◽  
Design Optimization ◽  
Automotive Industry ◽  
Turbulence Modeling ◽  
Turbulence Models ◽  
Analysis And Design ◽  
Eddy Simulation ◽  
Gradient Based ◽  
Automotive Aerodynamics ◽  
Single Flow

The demand in solving complex turbulent fluid flows has been growing rapidly in the automotive industry for the last decade as engineers strive to design better vehicles to improve drag coefficients, noise levels and drivability. This paper presents the implementation of an arbitrary hybrid turbulence modeling (AHTM) approach in OpenFOAM for the efficient simulation of common automotive aerodynamics with unsteady turbulent separated flows such as the Kelvin–Helmholtz effect, which can also be used as an efficient part of aerodynamic design optimization (ADO) tools. This AHTM approach is based on the concept of Very Large Eddy Simulation (VLES), which can arbitrarily combine RANS, URANS, LES and DNS turbulence models in a single flow field depending on the local mesh refinement. As a result, the design engineer can take advantage of this unique and highly flexible approach to tailor his grid according to his design and resolution requirements in different areas of the flow field over the car body without sacrificing accuracy and efficiency at the same time. This paper presents the details of the implementation and careful validation of the AHTM method using the standard benchmark case of the Ahmed body, in comparison with some other existing models, such as RANS, URANS, DES and LES, which shows VLES to be the most accurate among the five examined. Furthermore, the results of this study demonstrate that the AHTM approach has the flexibility, efficiency and accuracy to be integrated with ADO tools for engineering design in the automotive industry. The approach can also be used for the detailed study of highly complex turbulent phenomena such as the Kelvin–Helmholtz instability commonly found in automotive aerodynamics. Currently, the AHTM implementation is being integrated with the DAFoam for gradient-based multi-point ADO using an efficient adjoint solver based on a Sparse Nonlinear optimizer (SNOPT).

Large Eddy Simulation of the Heat Transfer Due to Swirling and Non-Swirling Jet Impingement

2008 ◽  
Author(s):  
Naseem Uddin ◽  
S. O. Neumann ◽  
B. Weigand
Keyword(s):  
Heat Transfer ◽  
Turbulence Models ◽  
Jet Impingement ◽  
Impinging Jet ◽  
Test Case ◽  
Complex Flow ◽  
Free Jet ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Target Wall

Turbulent impinging jet is a complex flow phenomenon involving free jet, impingement and subsequent wall jet development zones; this makes it a difficult test case for the evaluation of new turbulence models. The complexity of the jet impingement can be further amplified by the addition of the swirl. In this paper, results of Large Eddy Simulations (LES) of swirling and non-swirling impinging jet are presented. The Reynolds number of the jet based on bulk axial velocity is 23000 and target-to-wall distance (H/D) is two. The Swirl numbers (S) of the jet are 0,0.2, 0.47. In swirling jets, the heat transfer at the geometric stagnation zone deteriorates due to the formation of conical recirculation zone. It is found numerically that the addition of swirl does not give any improvement for the over all heat transfer at the target wall. The LES predictions are validated by available experimental data.

Evaluation of Turbulence Models Using Direct Numerical and Large-Eddy Simulation Data

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Hassan Raiesi ◽  
Ugo Piomelli ◽  
Andrew Pollard
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Eddy Viscosity ◽  
Predictive Accuracy ◽  
Turbulence Models ◽  
Special Treatment ◽  
Two Dimensional ◽  
Square Duct ◽  
Eddy Simulation ◽  
Large Eddy

The performance of some commonly used eddy-viscosity turbulence models has been evaluated using direct numerical simulation (DNS) and large-eddy simulation (LES) data. Two configurations have been tested, a two-dimensional boundary layer undergoing pressure-driven separation, and a square duct. The DNS and LES were used to assess the k−ε, ζ−f, k−ω, and Spalart–Allmaras models. For the two-dimensional separated boundary layer, anisotropic effects are not significant and the eddy-viscosity assumption works well. However, the near-wall treatment used in k−ε models was found to have a critical effect on the predictive accuracy of the model (and, in particular, of separation and reattachment points). None of the wall treatments tested resulted in accurate prediction of the flow field. Better results were obtained with models that do not require special treatment in the inner layer (ζ−f, k−ω, and Spalart–Allmaras models). For the square duct calculation, only a nonlinear constitutive relation was found to be able to capture the secondary flow, giving results in agreement with the data. Linear models had significant error.

scholarly journals Prediction of flow and dispersion in cross–ventilated buildings

2019 ◽  
Vol 128 ◽  
pp. 05002
Author(s):  
Ali Cemal Benim ◽  
Michael Diederich ◽  
Ali Nahavandi
Keyword(s):  
Computational Analysis ◽  
Turbulence Models ◽  
Reynolds Stress Model ◽  
Turbulence Structure ◽  
Detached Eddy Simulation ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Large Eddy ◽  
The Mean ◽  
Grid Independence

The present paper presents a detailed computational analysis of flow and dispersion in a generic isolated single–zone buildings. First, a grid generation strategy is discussed, that is inspired by a previous computational analysis and a grid independence study. Different turbulence models are appliedincluding two-equation turbulence models, the differential Reynolds Stress Model, Detached Eddy Simulation and Zonal Large Eddy Simulation. The mean velocity and concentration fields are calculated and compared with the measurements. A satisfactory agreement with the experiments is not observed by any of the modelling approaches, indicating the highly demanding flow and turbulence structure of the problem.

Sign in / Sign up

Export Citation Format

Share Document