An Integrated Approach to Geological Disposal of UK Wastes Containing Carbon-14

Author(s):  
Sarah Vines ◽  
David Lever

Carbon-14 is a key radionuclide in the assessment of the safety of a geological disposal facility for radioactive waste because of the calculated assessment of the radiological consequences of gaseous carbon-14 bearing species [i]. It may be that such calculations are based on overly conservative assumptions and that better understanding could lead to considerably reduced assessment of the radiological consequences from these wastes. Alternatively, it may be possible to mitigate the impact of these wastes through alternative treatment, packaging or design options. The Radioactive Waste Management Directorate of the UK’s Nuclear Decommissioning Authority (NDA RWMD) has established an integrated project team in which the partners are working together to develop a holistic approach to carbon-14 management in the disposal system [ii]. For a waste stream containing carbon-14 to be an issue: • There must be a significant inventory of carbon-14 in the waste stream; AND • That waste stream has to generate carbon-14 bearing gas; AND • A bulk gas phase has to entrain the carbon-14 bearing gas: AND • These gases must migrate through the engineered barriers in significant quantities; AND • These gases must migrate through the overlying geological environment (either as a distinct gas phase or as dissolved gas); AND • These gases must interact with materials in the biosphere (i.e. plants) in a manner that leads to significant doses and risks to exposed groups or potentially exposed groups. The project team has developed and used this “AND” approach to structure and prioritise the technical work and break the problem down in a manageable way. We have also used it to develop our approach to considering alternative treatment, packaging and design options. For example, it may be possible to pre-treat some wastes to remove some of the inventory or to segregate other wastes so that they are removed from any bulk gas phase which might facilitate migration through the geosphere. Initially, the project team has undertaken a six month programme of work to examine the current understanding of these aspects and has captured this in the Phase 1 report [ii], in a modelling basis spreadsheet and in scoping assessments, which help us better understand the potential significance of carbon-14. Using the current modelling basis, but ignoring any potential benefits from the geosphere in retarding or preventing gas from reaching the surface, the calculated release of carbon-14 is dominated by: corrosion of irradiated reactive metals (in the operational and early post-closure time frame); corrosion of irradiated stainless steel and leaching of irradiated graphite (in the longer term). The Phase 1 work has shown that there is considerable scope for reducing the calculated radiological consequence for these wastes and a roadmap has been developed for a second Phase of work.

Radiocarbon ◽  
2018 ◽  
Vol 60 (6) ◽  
pp. 1649-1656
Author(s):  
Simon Norris ◽  
Manuel Capouet

ABSTRACTThe European Commission CAST project (CArbon-14 Source Term) aimed to develop understanding of the potential release mechanisms of carbon-14 (radiocarbon, 14C) from radioactive waste materials under conditions relevant to waste packaging and disposal to underground geological disposal facilities. The project focused on the release of carbon-14 as dissolved and gaseous species from irradiated metals (steels, Zircaloys), from spent ion-exchange materials and from irradiated graphites. This paper provides an overview of the CAST project and its output. It also acts as an introduction and scene-setter to the other papers in this special edition of Radiocarbon.


Radiocarbon ◽  
2018 ◽  
Vol 60 (6) ◽  
pp. 1671-1681 ◽  
Author(s):  
Eva de Visser-Týnová ◽  
Stephen W Swanton ◽  
Stephen J Williams ◽  
Marcel P Stijkel ◽  
Alison J Walker ◽  
...  

ABSTRACTRadiocarbon (14C or carbon-14, half-life 5730 yr) is a key radionuclide in the assessment of the safety of a geological disposal facility (GDF) for radioactive waste. In particular, the radiological impact of gaseous carbon-14 bearing species has been recognized as a potential issue. Irradiated steels are one of the main sources of carbon-14 in the United Kingdom’s radioactive waste inventory. However, there is considerable uncertainty about the chemical form(s) in which the carbon-14 will be released. The objective of the work was to measure the rate and speciation of carbon-14 release from irradiated 316L(N) stainless steel on leaching under high-pH anoxic conditions, representative of a cement-based near field for low-heat generating wastes. Periodic measurements of carbon-14 releases to both the gas phase and to solution were made in duplicate experiments over a period of up to 417 days. An initial fast release of carbon-14 from the surface of the steel is observed during the first week of leaching, followed by a drop in the rate of release at longer times. Carbon-14 is released primarily to the solution phase with differing fractions released to the gas phase in the two experiments: about 1% of the total release in one and 6% in the other. The predominant dissolved carbon-14 releases are in inorganic form (as 14C-carbonate) but also include organic species. The predominant gas-phase species are hydrocarbons with a smaller fraction of 14CO (which may include some volatile oxygen-containing carbon-species). The experiments are continuing, with final sampling and termination planned after leaching for a total of two years.


2015 ◽  
Vol 79 (6) ◽  
pp. 1641-1650 ◽  
Author(s):  
David Lever ◽  
Sarah Vines

AbstractCarbon-14 is a key radionuclide in the assessment of the safety of a geological disposal facility because of the calculated assessment of the radiological consequences of gaseous carbon-14-bearing species. Radioactive Waste Management Limited has established an Integrated Project Team (IPT) in which partners are working together to develop an holistic approach to carbon-14 management in the disposal system. We have used an 'AND' approach to structure and prioritize our technical work. For a waste stream to be of concern, there has to be a significant inventory, AND carbon-14-bearing gas has to be generated, AND this gas has to be entrained by bulk gas, AND it has to migrate through the engineered barriers, AND it has to migrate through the overlying geological environment (either as gas or in solution), AND there have to be consequences in the biosphere. We are also using this approach to consider alternative treatment, packaging and design options.


2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Abdul Hasan Saragih

This classroom research was conducted on the autocad instructions to the first grade of mechinary class of SMK Negeri 1 Stabat aiming at : (1) improving the student’ archievementon autocad instructional to the student of mechinary architecture class of SMK Negeri 1 Stabat, (2) applying Quantum Learning Model to the students of mechinary class of SMK Negeri 1 Stabat, arising the positive response to autocad subject by applying Quantum Learning Model of the students of mechinary class of SMK Negeri 1 Stabat. The result shows that (1) by applying quantum learning model, the students’ achievement improves significantly. The improvement ofthe achievement of the 34 students is very satisfactory; on the first phase, 27 students passed (70.59%), 10 students failed (29.41%). On the second phase 27 students (79.41%) passed and 7 students (20.59%) failed. On the third phase 30 students (88.24%) passed and 4 students (11.76%) failed. The application of quantum learning model in SMK Negeri 1 Stabat proved satisfying. This was visible from the activeness of the students from phase 1 to 3. The activeness average of the students was 74.31% on phase 1,81.35% on phase 2, and 83.63% on phase 3. (3) The application of the quantum learning model on teaching autocad was very positively welcome by the students of mechinary class of SMK Negeri 1 Stabat. On phase 1 the improvement was 81.53% . It improved to 86.15% on phase 3. Therefore, The improvement ofstudent’ response can be categorized good.


1981 ◽  
Author(s):  
David C Stump ◽  
Donald E Macfarlane

Epinephrine induces platelet aggregation, potentiates aggregation by other agents, and blocks the stimulation of the adenylate cyclase by prostaglandins. Synthetic α-adrenergic agents have not been shown to induce aggregation. The effects of clonidine, an α2-agonist, and ρ-aminoclonidine on platelets were examined. Clonidine potentiated aggregation induced by 0.5μM ADP by 1.4-fold (1/2 max 0.5μM). It did not induce significant aggregation itself, and it inhibited aggregation induced by 5μM epinephrine (1/2 max lμM). It inhibited cyclic AMP accumulation induced by PGE1 by a maximum of 25% (1/2 max O.lμM) and it blocked inhibition by epinephrine. No significant specific binding of [3H] clonidine was observed to intact platelets. ρ-Aminoclonidine induced aggregation with delayed second phase (1/2 max 0.2μM), and potentiated ADP aggregation by 2-fold (1/2 max 0.2μM). Aggregation induced by epinephrine was more rapid, and was partially inhibited by ρ-aminoclonidine. It inhibited cyclic AMP accumulation by 50% max (1/2 max O.lμM) and attenuated epinephrine’s effect to the same level. The direct effects of ρ-aminoclonidine were blocked by lμM yohimbine, a selective α2-antagonist. Both clonidine and ρ—aminoclonidine blocked the specific binding of [3H]yohimbine (1/2 max 0.5μM). These results suggest that the platelet bears an α2-receptor with affinity for epinephrine, ρ-aminoclonidine and clonidine as agonists but that these agents display differing intrinsic activity and/or receptor reserve.


1997 ◽  
Vol 119 (19) ◽  
pp. 4525-4534 ◽  
Author(s):  
Anna Troiani ◽  
Francesco Gasparrini ◽  
Felice Grandinetti ◽  
Maurizio Speranza
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document