Flow and Temperature Fields Measurement Inside Rod Bundle by the Combined Use of PIV and LIF Technique

2018 ◽  
Author(s):  
Xing Li ◽  
Sichao Tan ◽  
Zhengpeng Mi ◽  
Peiyao Qi ◽  
Yunlong Huang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Great Influence ◽  
Reactor Core ◽  
Transfer Characteristic ◽  
Index Of Refraction ◽  
Temperature Fields ◽  
Spacer Grid ◽  
Rod Bundle ◽  
Combined Use

Thermal hydraulic research of reactor core is important in nuclear energy applications, the flow and heat transfer characteristics of coolant in reactor fuel assembly has a great influence on the performance and safety of nuclear power plants. Particle image velocimetry (PIV) and Laser induced fluorescence (LIF) are the instantaneous, non-intrusive, whole-field fluid mechanics measuring method. In this study, the simultaneous measurement of flow field and temperature field for a rod bundle was conducted using PIV and LIF technique. A facility system, utilizing the matching index of refraction approach, has been designed and constructed for the measurement of velocity and temperature in the rod bundle. In order for further study on complex heat and mass transfer characteristic of rod bundle, the single-phase experiments on the heating conditions are performed. One of unique characteristics of the velocity and temperature distribution downstream the spacer grid was obtained. The experimental results show that the combined use of PIV and LIF technique is applied to the measurement of multi-physical field in a rod bundle is feasible, the measuring characteristics of non-intrusive ensured accuracy of whole field data. The whole field experimental data obtained in rod bundle benefits the design of spacer grid geometry.

Expectations for Inservice Testing Programs at New Nuclear Power Plants

2017 ◽  
Author(s):  
Thomas G. Scarbrough
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Reactor Core ◽  
Nuclear Regulatory Commission ◽  
Lessons Learned ◽  
Mechanical Equipment ◽  
American Society ◽  
Regulatory Commission ◽  
Safety Systems

In a series of Commission papers, the U.S. Nuclear Regulatory Commission (NRC) described its policy for inservice testing (IST) programs to be developed and implemented at nuclear power plants licensed under 10 CFR Part 52. This paper discusses the expectations for IST programs based on those Commission policy papers as applied in the NRC staff review of combined license (COL) applications for new reactors. For example, the design and qualification of pumps, valves, and dynamic restraints through implementation of American Society of Mechanical Engineers (ASME) Standard QME-1-2007, “Qualification of Active Mechanical Equipment Used in Nuclear Power Plants,” as accepted in NRC Regulatory Guide (RG) 1.100 (Revision 3), “Seismic Qualification of Electrical and Active Mechanical Equipment and Functional Qualification of Active Mechanical Equipment for Nuclear Power Plants,” will enable IST activities to assess the operational readiness of those components to perform their intended functions. ASME has updated the Operation and Maintenance of Nuclear Power Plants (OM Code) to improve the IST provisions for pumps, valves, and dynamic restraints that are incorporated by reference in the NRC regulations with applicable conditions. In addition, lessons learned from performance experience and testing of motor-operated valves (MOVs) will be implemented as part of the IST programs together with application of those lessons learned to other power-operated valves (POVs). Licensee programs for the Regulatory Treatment of Non-Safety Systems (RTNSS) will be implemented for components in active nonsafety-related systems that are the first line of defense in new reactors that rely on passive systems to provide reactor core and containment cooling in the event of a plant transient. This paper also discusses the overlapping testing provisions specified in ASME Standard QME-1-2007; plant-specific inspections, tests, analyses, and acceptance criteria; the applicable ASME OM Code as incorporated by reference in the NRC regulations; specific license conditions; and Initial Test Programs as described in the final safety analysis report and applicable RGs. Paper published with permission.

The analysis of emergency situations related to fires at nuclear power plants

2021 ◽  
Vol 30 (5) ◽  
pp. 66-75
Author(s):  
S. A. Titov ◽  
N. M. Barbin ◽  
A. M. Kobelev
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Emergency Situations ◽  
The Usa ◽  
Large Fires ◽  
Short Circuits ◽  
Nuclear Reactor Core

Introduction. The article provides a system and statistical analysis of emergency situations associated with fires at nuclear power plants (NPPs) in various countries of the world for the period from 1955 to 2019. The countries, where fires occurred at nuclear power plants, were identified (the USA, Great Britain, Switzerland, the USSR, Germany, Spain, Japan, Russia, India and France). Facilities, exposed to fires, are identified; causes of fires are indicated. The types of reactors where accidents and incidents, accompanied by large fires, have been determined.The analysis of major emergency situations at nuclear power plants accompanied by large fires. During the period from 1955 to 2019, 27 large fires were registered at nuclear power plants in 10 countries. The largest number of major fires was registered in 1984 (three fires), all of them occurred in the USSR. Most frequently, emergency situations occurred at transformers and cable channels — 40 %, nuclear reactor core — 15 %, reactor turbine — 11 %, reactor vessel — 7 %, steam pipeline systems, cooling towers — 7 %. The main causes of fires were technical malfunctions — 33 %, fires caused by the personnel — 30 %, fires due to short circuits — 18 %, due to natural disasters (natural conditions) — 15 % and unknown reasons — 4 %. A greater number of fires were registered at RBMK — 6, VVER — 5, BWR — 3, and PWR — 3 reactors.Conclusions. Having analyzed accidents, involving large fires at nuclear power plants during the period from 1955 to 2019, we come to the conclusion that the largest number of large fires was registered in the USSR. Nonetheless, to ensure safety at all stages of the life cycle of a nuclear power plant, it is necessary to apply such measures that would prevent the occurrence of severe fires and ensure the protection of personnel and the general public from the effects of a radiation accident.

scholarly journals Assessment of water hammer effects on boiling water nuclear reactor core dynamics

2007 ◽  
Vol 22 (1) ◽  
pp. 18-33 ◽  
Author(s):  
Anis Bousbia-Salah
Keyword(s):  
Pressure Wave ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Water Hammer ◽  
Pressure Wave Amplitude ◽  
Sensitivity Studies ◽  
Rapid Transients ◽  
Complex Phenomena

Complex phenomena, as water hammer transients, occurring in nuclear power plants are still not very well investigated by the current best estimate computational tools. Within this frame work, a rapid positive reactivity addition into the core generated by a water hammer transient is considered. The numerical simulation of such phenomena was carried out using the coupled RELAP5/PARCS code. An over all data comparison shows good agreement between the calculated and measured core pressure wave trends. However, the predicted power response during the excursion phase did not correctly match the experimental tendency. Because of this, sensitivity studies have been carried out in order to identify the most influential parameters that govern the dynamics of the power excursion. After investigating the pressure wave amplitude and the void feed back responses, it was found that the disagreement between the calculated and measured data occurs mainly due to the RELAP5 low void condensation rate which seems to be questionable during rapid transients. .

scholarly journals A modern data measurement system to study and test thermionic heat to electricity converters

2018 ◽  
Vol 4 (3) ◽  
pp. 179-183
Author(s):  
Andrey Kirillov ◽  
Valeriy Yarygin
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Test System ◽  
Temperature Fields ◽  
Test Facility ◽  
Measurement Systems ◽  
Data Measurement ◽  
Functional Capabilities ◽  
Thermionic Nuclear Power ◽  
A Current

Studies and tests are conducted to determine the performance of thermionic nuclear power plants (TNPP) a stage in which is pre-irradiation testing of laboratory thermionic converters (TIC) with flat and cylindrically shaped electrodes using test facilities fitted with automated data measurement systems (DMS). The TIC volt-ampere characteristics (VAC) are measured in the DMS jointly with the measured test section and experimental test facility temperature fields. The structure and the characteristics of a DMS based on products from ICP DAS Co., Ltd are presented. A developed VAC measurement program providing the operator with a convenient graphic interface and enabling adjustment of the measurement parameters has been considered. The VAC recording errors in the process of measurements have been determined using TIC simulators. The error in the VAC diffusion portion on a simulator (with a current of less than 3 A) is not more than 1%. Thanks to the use of modern components, the developed DMS offers extended functional capabilities for measuring the thermocouple signals in an experimental electrophysical test facility. The DMS structure provides for the convenience of scaling (through a larger number of measuring channels) and makes it possible to add modules from other manufacturers. The experience of operating this DMS will be used to develop the DMS for an in-pile test system designed for similar functions.

scholarly journals Analysis of numerical studies on the thermal-hydraulic and neutronic thermal-hydraulic stability of supercritical water reactors

2021 ◽  
Vol 7 (4) ◽  
pp. 311-318
Author(s):  
Artavazd M. Sujyan ◽  
Viktor I. Deev ◽  
Vladimir S. Kharitonov
Keyword(s):  
Supercritical Water ◽  
Nuclear Power ◽  
Power Plants ◽  
Negative Impact ◽  
Reactor Core ◽  
Resistance Coefficient ◽  
Coolant Flow ◽  
Water Reactor ◽  
Hydraulic Stability ◽  
Supercritical Water Reactor

The paper presents a review of modern studies on the potential types of coolant flow instabilities in the supercritical water reactor core. These instabilities have a negative impact on the operational safety of nuclear power plants. Despite the impressive number of computational works devoted to this topic, there still remain unresolved problems. The main disadvantages of the models are associated with the use of one simulated channel instead of a system of two or more parallel channels, the lack consideration for neutronic feedbacks, and the problem of choosing the design ratios for the heat transfer coefficient and hydraulic resistance coefficient under conditions of supercritical water flow. For this reason, it was decided to conduct an analysis that will make it possible to highlight the indicated problems and, on their basis, to formulate general requirements for a model of a nuclear reactor with a light-water supercritical pressure coolant. Consideration is also given to the features of the coolant flow stability in the supercritical water reactor core. In conclusion, the authors note the importance of further computational work using complex models of neutronic thermal-hydraulic stability built on the basis of modern achievements in the field of neutron physics and thermal physics.

Power Maximization of Fully Passive Lead-Bismuth Eutectic Cooled Small Modular Reactor

2014 ◽  
Author(s):  
Jaehyun Cho ◽  
Yong-Hoon Shin ◽  
Il Soon Hwang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Natural Circulation ◽  
Reactor Core ◽  
Design Stage ◽  
Pressurized Water ◽  
Small Modular Reactor ◽  
Power Maximization ◽  
Lead Bismuth Eutectic ◽  
Water Reactors

Although the current Pressurized Water Reactors (PWRs) have significantly contributed to the global energy supply, PWRs have not been considered as a trustworthy energy solution owing to its several problems; spent nuclear fuels (SNFs), nuclear safety, and nuclear economy. In order to overcome these problems, lead-bismuth eutectic (LBE) fully passive cooling Small Modular Reactor (SMR) system is suggested. It is possible to not only provide the solution of the problem of SNFs through the transmutation feature of LBE coolant, but also increase the safety and economy through the concepts of the natural circulation cooling SMRs. It is necessary to maximize the advantages (safety and economy) of this type of Nuclear Power Plants for several applications in future. Accordingly, objective of the study is to maximize the reactor core power while the limitations of shipping size, materials endurance, long-burning criticality as well as safety under Beyond Design Basis Events must be satisfied. Design limitations of natural circulating LBE-cooling SMRs are researched and power maximization method is developed based on obtained design limitations. It is expected that the results are contributed to reactor design stage with providing several insights to designers as well as the methods for design optimization of other type of SMRs.

A Nodal Dynamic Model for Control System Simulation of the HTR-PM Reactor Core

2010 ◽  
Author(s):  
Zhe Dong ◽  
Xiaojin Huang ◽  
Liangju Zhang
Keyword(s):  
Control System ◽  
High Temperature ◽  
Power Distribution ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Pebble Bed ◽  
Nodal Model ◽  
High Temperature Gas

The modular high-temperature gas-cooled nuclear reactor (MHTGR) is seen as one of the best candidates for the next generation of nuclear power plants. China began to research the MHTGR technology at the end of the 1970s, and a 10 MWth pebble-bed high temperature reactor HTR-10 has been built. On the basis of the design and operation of the HTR-10, the high temperature gas-cooled reactor pebble-bed module (HTR-PM) project is proposed. One of the main differences between the HTR-PM and HTR-10 is that the ratio of height to diameter corresponding to the core of the HTR-PM is much larger than that of the HTR-10. Therefore it is not proper to use the point kinetics based model for control system design and verification. Motivated by this, a nodal neutron kinetics model for the HTR-PM is derived, and the corresponding nodal thermal-hydraulic model is also established. This newly developed nodal model can reflect not only the total or average information but also the distribution information such as the power distribution as well. Numerical simulation results show that the static precision of the new core model is satisfactory, and the trend of the transient responses is consistent with physical rules.

Experimental and Numerical Simulation on Hydraulic Behavior of Molten Flow in the Lower Part in Reactor Core

2016 ◽  
Author(s):  
Kota Matsuura ◽  
Hideaki Monji ◽  
Susumu Yamashita ◽  
Hiroyuki Yoshida
Keyword(s):  
Numerical Simulation ◽  
Liquid Film ◽  
High Speed ◽  
Nuclear Power ◽  
Power Plants ◽  
Flow Behavior ◽  
Reactor Core ◽  
Video Camera ◽  
Working Fluid ◽  
Simulation Code

In the decommissioning work of nuclear power plants, it is important to grasp the sedimentation place of molten materials. However, the technique to grasp exactly sedimentation place is not established now. Therefore, the detailed and phenomenological numerical simulation code named JUPITER for predicting the molten core behavior is developed. In the study, visualization experiment and numerical simulation were performed to validate the applicability of the JUPITER to the hydraulic relocation behavior in core internals. The test section used in this experiment simulated the structure of the core internals, such as a control rod and a fuel support piece, simply. The working fluid is water under the atmospheric pressure. The experiment uses a high-speed video camera to visualize the flow behavior. The behavior and the speed of the liquid film in a narrow flow channel is obtained. For the numerical analysis carried out prior to the experiment, the behavior of flow down liquid was shown. The typical behavior was also observed that the tip of a liquid film flowing down splits into.

scholarly journals Neutron flux simulation of a one-dimensional reactor zone taking into account xenon generation

Energetika ◽  
2020 ◽  
Vol 65 (4) ◽  
Author(s):  
Zsófia Tóth ◽  
Dániel Péter Kis
Keyword(s):  
Numerical Methods ◽  
Neutron Flux ◽  
Nuclear Power ◽  
Power Plants ◽  
Research Work ◽  
Reactor Core ◽  
Time And Space ◽  
One Dimensional ◽  
Safety And Reliability ◽  
The One

The energy in nuclear power plants is produced by thermal fission. It is extremely important to be able to monitor the processes in the reactor to ensure the safety and reliability of the power plant. One of the main traits of the reactor core is neutron flux. It changes in time and space therefore it is crucial to be able to simulate its changes with computer codes. In the research work a program code was established in the Matlab software with which the neutron flux of a one-dimensional zone can be simulated with homogenous and heterogenic zone parameters as well. The code is written using the one-group one-dimensional time- and space-dependent diffusion equation. The equation of an average delayed neutron group and xenon and iodine distributions was also included in the system to give a more precise look on the problem. The main innovation in the code is that numerical methods were used to solve the problem: the finite difference approach was applied for the place-dependent and for the time-dependent solution. The advantage of this code compared to other ones is that one-dimensional zones can be simulated in a really short time and it still gives a precise solution because of the complex numerical methods used.

Extensions to SCDAP/RELAP5/ATHENA for Analysis of HTGRs

2004 ◽  
Author(s):  
Edwin A. Harvego ◽  
Larry J. Siefken
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Molecular Diffusion ◽  
Natural Circulation ◽  
Reactor Core ◽  
Heat Sinks ◽  
Block Type ◽  
Flow Losses ◽  
Decay Heat ◽  
Extended Code

The SCDAP/RELAP5/ATHENA code was extended to enable the code to perform transient analyses of two leading candidates for the next generation of nuclear power plants, namely the Pebble Bed and Block-Type (prismatic) High Temperature Gas Reactors (PB-HTGRs and BT-HTGRs). Models in five areas of reactor behavior were implemented into the code. First, models were implemented to calculate the transfer of decay heat by conduction and radiation from the center of the heterogeneous cores of these reactors to their outer surfaces. Second, models were implemented to calculate the transfer of decay heat from the outer surfaces of these reactor cores to ultimate heat sinks such as the atmosphere. Third, models were implemented to calculate the flow losses and convective heat transfer in the core of a PB-HTGR. Fourth, models were implemented to calculate the oxidation of graphite due to the ingress of air. Fifth, a model was implemented to calculate the ingress of air into the reactor core by molecular diffusion from the point of break in the coolant system. The extended code was applied to the analysis of conduction cooldown accident in a BT-HTGR. The analysis indicated that the new models in SCDAP/RELAP5/ATHENA are properly interfaced with the previously developed and assessed fluid behavior models in the code. Preliminary results indicate that post-shutdown decay heat can be adequately removed from BT-HTGRs by natural circulation of air from the atmosphere.

Sign in / Sign up

Export Citation Format

Share Document