Influence of Surface Topography on the Tribo-Characteristics of an Eccentric-Tappet Pair

2012 ◽  
Author(s):  
J. Wang ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Surface Topography ◽  
Pressure Fluctuations ◽  
Theoretical Simulation ◽  
Temperature Distributions ◽  
Minimum Film Thickness ◽  
Overall Performance ◽  
Complete Fracture ◽  
Exhaust Valves ◽  
Surface Generate

The cam-tappet pair is one of the most important components in an engine and determines the overall performance of the motor. Compared with modern car engines using rolling-sliding tappets for the transmission of the rapid up-down lifting motion of the cam to open and close the engine’s inlet and exhaust valves, the flat-tappets are often subject to fatigue failure. Upon stripping down a damaged motor, the tappets are invariably found to be heavily pitted. This study performs a theoretical simulation of the surface topography influence on the tribo-characteristics of an eccentric-tappet pair. The asperities on the flat-tappet surface generate fluctuations of the pressure, film thickness and temperature distributions. The pressure fluctuations result in alternative stresses in the metal. The periodical variations of pressure, minimum film thickness and thermal rise are investigated by changing the eccentricity and roughness wavelength. The results suggest an explanation for the rapid occurrence of cracks or even complete fracture in the cam and flat-tappet pair.

Influence of Scratches on the Performance of a Partial Journal Bearing

2008 ◽  
Author(s):  
Mihai B. Dobrica ◽  
Michel Fillon
Keyword(s):  
Film Thickness ◽  
Thermal Effects ◽  
Journal Bearing ◽  
Friction Torque ◽  
Maximum Pressure ◽  
Relative Depth ◽  
Performance Loss ◽  
Minimum Film Thickness ◽  
Overall Performance ◽  
Bearing Damage

In this paper, the influence of circumferential scratches on the thermohydrodynamic performance of a partial (lobe) journal bearing is studied. The bearing damage is characterized by four factors: the area of the scratched region, the density of the scratches within the affected area, the relative position of the scratched region and the relative depth of the wear defects. The bearing performance is characterized by minimum film thickness, average oil temperature, maximum pressure, friction torque etc., at imposed magnitude and direction of the load. A numerical hydrodynamic model with global thermal effects is used for studying the influence of the different wear related parameters on the bearing performance. The results permit to predict the overall performance loss due to the circumferential wear marks, for different wear profiles. The types of wear profiles that can lead to the bearing destruction (characterized by a critical minimum film thickness) are also investigated.

Roughness Amplitude Reduction Under Non-Newtonian EHL Conditions

2005 ◽  
Author(s):  
A. D. Chapkov ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Pressure Fluctuations ◽  
Elastohydrodynamic Lubrication ◽  
Operating Conditions ◽  
Quantitative Prediction ◽  
Point Contacts ◽  
Minimum Film Thickness ◽  
Roughness Amplitude ◽  
Average Film Thickness ◽  
Ehl Contact

The influence of surface roughness on the performance of bearings and gears operating under ElastoHydrodynamic Lubrication (EHL) conditions has become increasingly important over the last decade, as the average film thickness decreased due to various influences. Surface features can reduce the minimum film thickness and thus increase the wear. They can also increase the temperature and the pressure fluctuations, which directly affects the component life. In order to describe the roughness geometry inside an EHL contact, the amplitude reduction of harmonic waviness has been studied over the last ten years. This theory currently allows a quantitative prediction of the waviness amplitude and includes the influence of wavelength and contact operating conditions. However, the model assumes a Newtonian behaviour of the lubricant. The current paper makes a first contribution to the extension of the roughness amplitude reduction for EHL point contacts including non-Newtonian effects.

Temperature Measurements in Sliding Elastohydrodynamic Point Contacts

1974 ◽  
Vol 96 (3) ◽  
pp. 464-469 ◽  
Author(s):  
V. Turchina ◽  
D. M. Sanborn ◽  
W. O. Winer
Keyword(s):  
Film Thickness ◽  
Surface Temperature ◽  
Infrared Radiation ◽  
Point Contact ◽  
Mineral Oil ◽  
Temperature Measurements ◽  
Point Contacts ◽  
Oil Film ◽  
Temperature Distributions ◽  
Minimum Film Thickness

Techniques using the infrared radiation emitted by a sliding EHD point contact to measure oil film and surface temperature are discussed. Temperature distributions in the EHD contact are presented for a naphthenic mineral oil at 1.04 × 109 N/m2 (150,000 psi) Hertz pressure and several sliding velocities. Film temperatures as high as 360 C are reported at locations near the points of minimum film thickness in the contact side lobes.

Predictive tool for frictional performance of piston ring-pack/liner conjunction

2019 ◽  
Vol 13 (3) ◽  
pp. 5513-5527
Author(s):  
J. W. Tee ◽  
S. H. Hamdan ◽  
W. W. F. Chong
Keyword(s):  
Film Thickness ◽  
Mathematical Models ◽  
Piston Ring ◽  
Published Data ◽  
Predictive Tool ◽  
Frictional Losses ◽  
Fundamental Understanding ◽  
Minimum Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

Fundamental understanding of piston ring-pack lubrication is essential in reducing engine friction. This is because a substantial portion of engine frictional losses come from piston-ring assembly. Hence, this study investigates the tribological impact of different piston ring profiles towards engine in-cylinder friction. Mathematical models are derived from Reynolds equation by using Reynolds’ boundary conditions to generate the contact pressure distribution along the complete piston ring-pack/liner conjunction. The predicted minimum film thickness is then used to predict the friction generated between the piston ring-pack and the engine cylinder liner. The engine in-cylinder friction is predicted using Greenwood and Williamson’s rough surface contact model. The model considers both the boundary friction and the viscous friction components. These mathematical models are integrated to simulate the total engine in-cylinder friction originating from the studied piston ring-pack for a complete engine cycle. The predicted minimum film thickness and frictional properties from the current models are shown to correlate reasonably with the published data. Hence, the proposed mathematical approach prepares a simplistic platform in predicting frictional losses of piston ring-pack/liner conjunction, allowing for an improved fundamental understanding of the parasitic losses in an internal combustion engine.

Sinusoidal Three-Lobe Bearings—Optimization and Stability Charts

1980 ◽  
Vol 102 (4) ◽  
pp. 416-424 ◽  
Author(s):  
W. E. ten Napel ◽  
R. Bosma
Keyword(s):  
Film Thickness ◽  
Stability Parameters ◽  
Stability Regions ◽  
Damping Coefficients ◽  
Optimum Position ◽  
Minimum Film Thickness ◽  
Stiffness And Damping

In contradistinction to the commonly used segmented three-lobe bearing, another type of bearing, i.e., the sinusoidal three-lobe bearing has been investigated in this paper. The main advantage of this bearing is that it can very easily be manufactured. Special attention has been paid to problems of optimization with regard to minimum film thickness and friction, respectively. Stiffness and damping coefficients have been calculated as well as stability regions and stability parameters. Additionally, the optimum position of the oil grooves has been investigated.

Dynamic Analysis of Tilting-Pad Journal Bearing—Influence of Pad Deformations

1994 ◽  
Vol 116 (3) ◽  
pp. 621-627 ◽  
Author(s):  
H. Desbordes ◽  
M. Fillon ◽  
C. Chan Hew Wai ◽  
J. Frene
Keyword(s):  
Film Thickness ◽  
Pressure Field ◽  
Journal Bearing ◽  
Maximum Pressure ◽  
Tilting Pad ◽  
Minimum Film Thickness ◽  
Dimensional Finite Element ◽  
The One ◽  
Tilting Pad Journal Bearing ◽  
Tilting Pad Journal Bearings

A theoretical nonlinear analysis of tilting-pad journal bearings is presented for small and large unbalance loads under isothermal conditions. The radial displacements of internal pad surface due to pressure field are determined by a two-dimensional finite element method in order to define the actual film thickness. The influence of pad deformations on the journal orbit, on the minimum film thickness and on the maximum pressure is studied. The effects of pad displacements are to decrease the minimum film thickness and to increase the maximum pressure. The orbit amplitude is also increased by 20 percent for the large unbalance load compared to the one obtained for rigid pad.

Influence of Surface Waviness on the Thermal Elastohydrodynamic Lubrication of an Eccentric-Tappet Pair

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
J. Wang ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Surface Waviness ◽  
Film Pressure ◽  
Oil Film ◽  
Working Cycle ◽  
Temperature Oscillations ◽  
Minimum Film Thickness ◽  
Traction Coefficient ◽  
Oil Film Pressure

The effect of single-sided and double-sided harmonic surface waviness on the film thickness, pressure, and temperature oscillations in an elastohydrodynamically lubricated eccentric-tappet pair has been investigated in relation to the eccentricity and the waviness wavelength. The results show that, during one working cycle, the waviness causes significant fluctuations of the oil film, pressure, and temperature, as well as a reduction in minimum film thickness. Smaller wavelength causes more dramatic variations in oil film. The fluctuations of the pressure, film thickness, temperature, and traction coefficient caused by double-sided waviness are nearly the same compared with the single-sided waviness, but the variations are less intense.

An Accurate Solution of the Gas Lubricated, Flat Sector Thrust Bearing

1977 ◽  
Vol 99 (1) ◽  
pp. 82-88 ◽  
Author(s):  
I. Etsion ◽  
D. P. Fleming
Keyword(s):  
Film Thickness ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Thickness Distribution ◽  
Maximum Load ◽  
Accurate Solution ◽  
Operating Conditions ◽  
Thrust Bearings ◽  
Practical Design ◽  
Minimum Film Thickness

A flat sector shaped pad geometry for gas lubricated thrust bearings is analyzed considering both pitch and roll angles of the pad and the true film thickness distribution. Maximum load capacity is achieved when the pad is tilted so as to create a uniform minimum film thickness along the pad trailing edge. Performance characteristics for various geometries and operating conditions of gas thrust bearings are presented in the form of design curves. A comparison is made with the rectangular slider approximation. It is found that this approximation is unsafe for practical design, since it always overestimates load capacity.

Film thickness in elastohydrodynamically lubricated slender elliptic contacts: Part I – numerical studies of central film thickness

2021 ◽  
pp. 135065012110477
Author(s):  
Marius Wolf ◽  
Sergey Solovyev ◽  
Fatemi Arshia
Keyword(s):  
Film Thickness ◽  
State Of The Art ◽  
Experimental Studies ◽  
Elastohydrodynamic Lubrication ◽  
Large Parameter ◽  
Numerical Studies ◽  
Minimum Film Thickness ◽  
Subsequent Publication ◽  
New Formula ◽  
Increasing Load

In this paper, analytical equations for the central film thickness in slender elliptic contacts are investigated. A comparison of state-of-the-art formulas with simulation results of a multilevel elastohydrodynamic lubrication solver is conducted and shows considerable deviation. Therefore, a new film thickness formula for slender elliptic contacts with variable ellipticity is derived. It incorporates asymptotic solutions, which results in validity over a large parameter domain. It captures the behaviour of increasing film thickness with increasing load for specific very slender contacts. The new formula proves to be significantly more accurate than current equations. Experimental studies and discussions on minimum film thickness will be presented in a subsequent publication.

scholarly journals Analytical Formula for the Ratio of Central to Minimum Film Thickness in a Circular EHL Contact

Lubricants ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 80 ◽  
Author(s):  
Petr Sperka ◽  
Ivan Krupka ◽  
Martin Hartl
Keyword(s):  
Experimental Data ◽  
Film Thickness ◽  
Analytical Formula ◽  
Numerical Calculations ◽  
Constant Ratio ◽  
Viscosity Coefficients ◽  
Wide Range ◽  
Minimum Film Thickness ◽  
Film Parameter ◽  
Ehl Contact

Prediction of minimum film thickness is often used in practice for calculation of film parameter to design machine operation in full film regime. It was reported several times that majority of prediction formulas cannot match experimental data in terms of minimum film thickness. These standard prediction formulas give almost constant ratio between central and minimum film thickness while numerical calculations show ratio which spans from 1 to more than 3 depending on M and L parameters. In this paper, an analytical formula of this ratio is presented for lubricants with various pressure–viscosity coefficients. The analytical formula is compared with optical interferometry measurements and differences are discussed. It allows better prediction, compared to standard formulas, of minimum film thickness for wide range of M and L parameters.

Sign in / Sign up

Export Citation Format

Share Document