The Effects of Soil Properties on the Fracture Speeds of Propagating Axial Cracks in Line Pipe Steels

2006 ◽  
Author(s):  
D. Rudland ◽  
G. Wilkowski ◽  
B. Rothwell
Keyword(s):  
Moisture Content ◽  
Ductile Fracture ◽  
Soil Type ◽  
Small Diameter ◽  
Valuable Insight ◽  
Total Density ◽  
Pipe Material ◽  
Pipe Steels ◽  
Line Pipe ◽  
Fracture Arrest

The ductile fracture resistance of newer line pipe steels is of concern for higher grade/strength steels and higher-pressure pipeline designs. Although there have been several attempts to make improved ductile fracture arrest models, the model that is still used most frequently is the Battelle Two-Curve Ductile Fracture Arrest Model, which incorporates the gas-decompression behavior with the fracture toughness of the pipe material to predict the minimum Charpy energy required for crack arrest. For this model, the effect of backfill on the propagating crack fracture speeds is lumped into one empirically based “backfill coefficient,” which does not distinguish different soil types or strengths. Some modifications to this backfill coefficient have been proposed for frozen soil as a function of moisture content, and for water backfill for offshore applications, but no attempt has been made to quantify the effects of soil type, total density or strength on the fracture speeds of propagating cracks in line pipe steels. This paper presents the results from a series of small diameter pipe burst tests that were conducted with different soil backfills. The soils’ moisture content, density, and strength were fully characterized in situ and in the laboratory. In addition, fracture speed data in both unbackfilled and backfilled conditions were recorded. The comparison of the change in fracture speed as a function of soil type, moisture and strength gives valuable insight into the effects of soil on the arrest of running ductile fractures in line pipe materials.

Effects of Soil Cohesiveness and Depth on Dynamic Ductile Fracture Speeds

2008 ◽  
Author(s):  
D. Rudland ◽  
D.-J. Shim ◽  
G. M. Wilkowski ◽  
S. Kawaguchi ◽  
N. Hagiwara ◽  
...  
Keyword(s):  
Ductile Fracture ◽  
Large Scale ◽  
Soil Depth ◽  
Crack Arrest ◽  
Small Scale ◽  
Total Density ◽  
Pipe Material ◽  
Pipe Steels ◽  
Line Pipe ◽  
Fracture Arrest

The ductile fracture resistance of newer line pipe steels is of concern for high grade/strength steels and higher-pressure pipeline designs. Although there have been several attempts to make improved ductile fracture arrest models, the model that is still used most frequently is the Battelle Two-Curve Method (TCM). This analysis incorporates the gas-decompression behavior with the fracture toughness of the pipe material to predict the minimum Charpy energy required for crack arrest. For this analysis, the influence of the backfill is lumped into one empirically developed “soil” coefficient which is not specific to soil type, density or strength. No attempt has been made to quantify the effects of soil depth, type, total density or strength on the fracture speeds of propagating cracks in line pipe steels. In this paper, results from small-scale and large-scale burst tests with well-controlled backfill conditions are presented and analyzed to determine the effects of soil depth and cohesiveness on the fracture speeds. Combining this data with the past full-scale burst data used in generating the original backfill coefficient provides additional insight into the effects of the soil properties on the fracture speeds and the arrest of running ductile fractures in line pipe materials.

Brittle Fracture Arrest in High Charpy Energy Steels: Comparisons With Some Existing Data

2014 ◽  
Author(s):  
G. Wilkowski ◽  
D-J. Shim ◽  
Y. Hioe ◽  
S. Kalyanam ◽  
M. Uddin
Keyword(s):  
Brittle Fracture ◽  
Pipe Steels ◽  
Shelf Energy ◽  
Line Pipe ◽  
Pipe Burst ◽  
Sensitivity Studies ◽  
Shear Area ◽  
Fracture Arrest ◽  
Pipeline Design ◽  
Very High

Current line-pipe steels have significantly higher Charpy upper-shelf energy than older steels. Many newer line-pipe steels have Charpy upper-shelf energy in the 300 to 500J range, while older line-pipe steels (pre-1970) had values between 30 and 60J. With this increased Charpy energy comes two different and important aspects of how to predict the brittle fracture arrestability for these new line-pipe steels. The first aspect of concern is that the very high Charpy energy in modern line-pipe steels frequently produces invalid results in the standard pressed-notch DWTT specimen. Various modified DWTT specimens have been used in an attempt to address the deficiencies seen in the PN-DWTT procedure. In examining fracture surfaces of various modified DWTT samples, it has been found that using the steady-state fracture regions with similitude to pipe burst test (regions with constant shear lips) rather than the entire API fracture area, results collapse to one shear area versus temperature curve for all the various DWTT specimens tested. Results for several different materials will be shown. The difficulty with this fracture surface evaluation is that frequently the standard pressed-notch DWTT only gives valid transitional fracture data up to about 20-percent shear area, and then suddenly goes to 100-percent shear area. The second aspect is that with the much higher Charpy energy, the pipe does not need as much shear area to arrest a brittle fracture. Some analyses of past pipe burst tests have been recently shown and some additional cases will be presented. This new brittle fracture arrest criterion means that one does not necessarily have to specify 85-percent shear area in the DWTT all the time, but the shear area needed for brittle fracture arrest depends on the pipeline design conditions (diameter, hoop stress) and the Charpy upper-shelf energy of the steel. Sensitivity studies and examples will be shown.

Mechanical and Metallurgical Aspects of the Resistance to Ductile Fracture Propagation in the New Generation of Gas Pipelines

2014 ◽  
Author(s):  
Igor Pyshmintsev ◽  
Alexey Gervasyev ◽  
Victor Carretero Olalla ◽  
Roumen Petrov ◽  
Andrey Arabey
Keyword(s):  
Ductile Fracture ◽  
Mechanical Test ◽  
Fracture Propagation ◽  
Rolling Plane ◽  
Full Scale ◽  
Charpy Test ◽  
Line Pipe ◽  
Surface Separation ◽  
Fracture Arrest ◽  
New Generation

The microstructure and fracture behavior of the base metal of different X80 steel line pipe lots from several pipeline projects were analyzed. The resistance of the pipes to ductile fracture propagation was determined by the full-scale burst tests. The high intensity of fracture surface separation (secondary brittle cracks parallel to the rolling plane of the plate) appeared to be the main factor reducing the specific fracture energy of ductile crack propagation. A method for quantitative analysis of microstructure allowing estimation of the steel’s tendency to form separations is proposed. The procedure is based on the EBSD data processing and results in Cleavage Morphology Clustering (CMC) parameter evaluation which correlates with full-scale and laboratory mechanical test results. Two special laboratory mechanical test types utilizing SENT and Charpy test concepts for prediction of ductile fracture arrest/propagation in a pipe were developed and included into Gazprom specifications.

Modified West Jefferson Burst Test for Assessment of Brittle Fracture Arrest in Thick-Wall TMCP Line-Pipe Steel With High Charpy Energy

2016 ◽  
Author(s):  
S. Igi ◽  
T. Sakimoto ◽  
J. Kondo ◽  
Y. Hioe ◽  
G. Wilkowski
Keyword(s):  
Transition Temperature ◽  
Brittle Fracture ◽  
Ductile Fracture ◽  
Base Metal ◽  
The Other ◽  
Line Pipe ◽  
Burst Test ◽  
Seam Weld ◽  
Shear Area ◽  
Fracture Arrest

Three partial gas pipe burst tests were conducted to assess the brittle-to-ductile transition temperature and brittle fracture arrestability of a heavy-walled TMCP line-pipe steel. This steel had a very high Charpy energy (400 J) which is typical of many modern line-pipe steels. In standard pressed-notch DWTT specimen tests this material exhibited abnormal fracture appearance (ductile fracture from the pressed notch prior to brittle fracture starting) that occurs with many high Charpy energy steels. Such behavior gives an invalid test by API RP 5L3, which makes the transition temperature difficult to determine. The first burst test was conducted in a manner that is typical of a traditional West Jefferson (partial gas vessel) burst tests. The crack was initiated in the center of the cooled vessel (with a partial air gap), but an unusual result occurred. In this test a ductile fracture just barely started from each crack tip, but one of the endcaps blew off. The pipe rocketed into the wall of a containment building. The opposite endcap impacted the wall of the building and brittle fractures started there with one coming back to the center of the vessel. The implication from this test was that perhaps initiation of the brittle fracture in the base metal gives different results than if the initial crack came from a brittle location. The second burst test used a modified West-Jefferson Burst Test procedure. The modification involved cutting a short length of pipe at the center of the vessel and rotating the seam weld to the line of crack propagation. The HAZ of the axial seam weld had a higher dynamic transition temperature. The initiation flaw was across one of the center girth welds so that one side of the initial through-wall crack had the crack tip in the base metal while the other side initiated in the seam weld HAZ. On the base metal side, the crack had about 220 mm of crack growth before reaching steady-state shear area, i.e., the shear area gradually decreased as the fracture speed was increasing. On the other side, a brittle fracture was started in the HAZ as expected, and once it crossed the other central girth weld into the base metal, the fracture immediately transformed to a lower shear area percent. These results along with those from the first burst test suggest that the DWTT specimen should have a brittle weld metal in the starter notch region to ensure the arrestability of the material. The final burst test was at a warmer temperature. There was a short length of crack propagation with higher shear area percent, which quickly turned to ductile fracture and arrested. In addition various modified DWTTs were conducted and results were analyzed using an alternative brittle fracture arrest criterion to predict pipe brittle fracture arrestability.

When Old Line Pipes Initiates Fracture in a Ductile Manner

2006 ◽  
Author(s):  
G. Wilkowski ◽  
D. Rudland ◽  
D. Rider ◽  
P. Mincer ◽  
W. Sloterdijk
Keyword(s):  
Transition Temperature ◽  
Ductile Fracture ◽  
Static Loading ◽  
Crack Depth ◽  
Temperature Shift ◽  
Charpy Impact ◽  
Pipe Material ◽  
Line Pipe ◽  
Strain Rate Effects ◽  
Constraint Effects

This paper presents a procedure to determine the lowest temperature that a ductile fracture will initiate in old (or new) pipe that behaves in a brittle manner (by Charpy testing). Over the last decade, much work has been done to assess constraint effects on the crack-driving force for specimens and cracks in pipes. The material’s transition temperature where the fracture process changes from ductile tearing to cleavage fracture at crack initiation is affected by the constraint conditions, but is a material property that cannot be determined analytically. This paper presents a methodology to account for constraint effects to predict the lowest temperature where ductile fracture initiation occurs and relates that temperature back to Charpy impact data for X60 and lower grades, particularly for older vintage linepipe materials. The method involves a series of transition temperature shifts to account for thickness effects, strain-rate effects, and constraint effects to give a master curve of transition temperatures from Charpy data to through-wall-cracked or surface-cracked pipes (with various surface-crack depth values) under quasi-static loading. These transition temperature shifts were based on hundreds of pipe tests and thousands of specimen tests over several decades of work by numerous investigators. Conducting tests on 1927 and 1948 vintage line-pipe steels subsequently validated this method. In addition, data were developed on the 1927 vintage pipe material to assess the effect of the bluntness of a corrosion flaw on the lowest temperature where ductile fracture will still occur under quasi-static loading. An addition transition temperature shift occurs as a function of the bluntness of the flaw.

Investigation Into the Use of a Single Specimen for the Determination of Dynamic Steady State Propagation Resistance in High Toughness Line-Pipe Steels

2002 ◽  
Author(s):  
David L. Rudland ◽  
Gery Wilkowski ◽  
Yong-Yi Wang ◽  
David Horsley ◽  
Brian Rothwell ◽  
...  
Keyword(s):  
Steady State ◽  
Fracture Energy ◽  
Ductile Fracture ◽  
Opening Angle ◽  
Single Specimen ◽  
Pipe Steels ◽  
Line Pipe ◽  
Propagation Resistance ◽  
High Toughness ◽  
Dynamic Ductile Fracture

This paper summarizes efforts funded by TransCanada PipeLine Limited on improving the methodology for predicting a true measure of the dynamic steady-state fracture toughness of line-pipe steels using a single mill test specimen. In the past, ductile fracture methodologies generally involved using the Charpy V-notch test to empirically quantify the material dynamic ductile fracture propagation resistance. However, due to its geometry, the use of the Charpy test has proven to be unreliable for high-toughness materials, for materials that have rising-shelf energies, and for higher-grade steels (relative to those for which correlations were originally established). An improved methodology for characterizing the dynamic ductile fracture resistance is to utilize the energy from a full-thickness impact specimen, of which the Drop-Weight Tear Test (DWTT) specimen is the most frequently used type. It has been demonstrated that the total energy from a DWTT-type specimen includes; (1) the energy associated with initiation of the crack (including indentation energy and yielding of the specimen), (2) the energy for transient crack growth from initiation to reaching steady-state fracture, (3) steady-state fracture energy, and (4) a non-steady-state fracture energy region at the end of the test. During the steady-state fracture region it was observed that both the crack velocity and constant crack-tip-opening angle (CTOA) remained constant. This paper presents the results of an investigation aimed at identifying a single specimen that will capture only the steady-state fracture energy present in standard DWTT specimens. Detailed experiments and three-dimensional finite element analyses were used to verify various procedures for eliminating the initiation energy and the residual energy at the end of the tests. A non-instrumented modified specimen, the back-slotted, static-precracked DWTT (BS-SPC-DWTT) specimen, has been developed from the results of these analyses. Energy results from this specimen, for a variety of line-pipe steels, are presented. A correlation between these energies and the propagation energy from standard DWTT specimen is presented. This correlation will aid in the methodology for predicting axial crack arrest in line-pipe steels having higher toughness, a rising upper shelf, or a higher grade.

The Misconception of Employing CVN Toughness as Key-Measure in Ductile Crack Arrest Prediction for Modern Line-Pipe Steels

2014 ◽  
Author(s):  
Alexander Völling ◽  
Christoph Kalwa ◽  
Marion Erdelen-Peppler
Keyword(s):  
Ductile Fracture ◽  
Data Base ◽  
Model Calibration ◽  
Crack Arrest ◽  
Full Scale ◽  
Small Scale ◽  
Material Strength ◽  
Original Material ◽  
Pipe Steels ◽  
Line Pipe

Since the late 1960s’ the Battelle Two-curve (BTC) model is the standard method applied in setting up design requirements with regard to the prevention of long-running ductile fracture in pipelines. It is a straightforward tool employing Charpy-V notch (CVN) toughness as key-measure for material resistance against crack propagation. On basis of pipe dimensions, material strength, and under consideration of decompression behavior of the transferred media, it enables to set up requirements for a minimum CVN toughness level to achieve crack arrest. Overall applicability of the BTC model is based on calibration of the underlying equations to a sound data-base, including both full-scale burst test results and small-scale laboratory testing data involving typical line-pipe grades at that period, i.e. up to grade X70 steels with below 100 J upper-shelf CVN toughness. Now over the last decades, mechanical behavior of line-pipe steels was improved significantly. Responding to market demands, higher grades were designed and also toughness levels were raised as outcome of R&D efforts within the steel industry. Unfortunately, stepping outside the original material data-base from BTC model calibration, this method did forfeit its reliability. At the beginning, mispredictions were mainly related to higher grade steels and elevated operating pressures. But more recent full-scale tests did reveal discrepancies in application of the BTC model also for so-called new vintage steels, i.e. grades actually being inside the original data base for model calibration but from current production routes. With regard to applicability/reliability of BTC model based predictions for crack arrest, the origin of uncertainty has particularly been traced back to the involved material toughness measure. Nowadays, it is common sense that the CVN upper-shelf toughness value inadequately describes the resistance against running ductile fracture. More recent thoughts coherently argue towards closer involving stress-strain response and plastic deformation capacities of the material. On basis of results for grades X65, X80 and X100, the general relation between ductility and toughness is discussed. Finally, an elastic-plastic fracture mechanics related analytical approach is introduced which enables to quantify the resistance against ductile fracture propagation. The objective is to provide a reliable procedure for crack arrest prediction in line-pipe steels.

Fracture Arrest Assessment of Low Toughness Pipelines

2006 ◽  
Author(s):  
Mark Stephens ◽  
Mark Fuglem ◽  
Wytze Sloterdijk
Keyword(s):  
Probabilistic Approach ◽  
Evaluation Process ◽  
Operating Conditions ◽  
Pipe Material ◽  
Additional Material ◽  
Line Pipe ◽  
Propagation Resistance ◽  
Scenario Evaluation ◽  
Sample Data ◽  
Fracture Arrest

In support of the development of Fracture Control Plans for older pipelines, a probabilistic approach has been developed for evaluating the susceptibility of these potentially low toughness lines to ductile and/or brittle propagating fractures. In characterizing the fracture arrest capability of these lines, the methodology explicitly accounts for the uncertainties associated with imperfect fracture arrest models, the inherent variability in line pipe material properties, and the added uncertainty associated with estimates based on limited amounts of sample data. A PC-based software implementation of this methodology has been developed that can be used to first prescribe a fracture arrest criterion in terms of a target proportion of arrest joints, and to then estimate the likelihood that a given pipeline segment will meet this target value based on the available line-specific material toughness data. Where the prescribed fracture arrest criterion is not met, a scenario evaluation process can be employed to assess the value of collecting additional material toughness data. The scenario evaluation process involves estimating the likelihood that similar additional sample data will reduce the effects of sample size uncertainty to the point where the chosen fracture arrest criterion is satisfied. The results of this type of propagation susceptibility analysis are useful in assessing the implications of a possible line failure from both a business/financial perspective as well as a life safety perspective. The approach can be used to demonstrate that older existing lines satisfy the intent of current codes with regard to propagation resistance, or to determine the change in operating conditions necessary to achieve a target level of fracture propagation resistance.

Metallurgical Design and Development of High Deformable X100 Line Pipe Steels Suitable for Strain-Based Design

2008 ◽  
Author(s):  
Takuya Hara ◽  
Yoshio Terada ◽  
Yasuhiro Shinohara ◽  
Hitoshi Asahi ◽  
Naoki Doi
Keyword(s):  
Low Temperature ◽  
High Strength ◽  
Pipe Material ◽  
Pipe Steels ◽  
Design And Development ◽  
Long Distance ◽  
Line Pipe ◽  
The World ◽  
Low Temperature Toughness ◽  
Transmission Pipelines

The demand for natural gas using pipelines and LNG to supply the world gas markets is increasing substituting for oil and coal. The use of high strength line pipe steels provides the reduction of cost of gas transmission pipelines by enabling high-pressure transmission of large volumes of gas. In particular, high strength line pipe materials with a yield strength of X80 or higher have been developed over the last few decades around the world. Long distance gas transmission pipelines from remote areas sometimes pass through discontinuous permafrost, and are subject to ground movements by repeated thaw subsidence and frost heave. In this case, strain-based design has been applied as well as stress-based design. Therefore, high deformable line pipe is required for strain-based design in order to prevent the pipeline from fracturing. Nippon steel has also developed high deformable high strength line pipe material suitable for strain-based design. In recent years, demand for high strength line pipe steels has emerged in which the molybdenum content is reduced because of the high cost of molybdenum. Conventionally, high strength line pipe steel with Mo addition has been developed in order to control the microstructure and to obtain pipe properties such as strength and low temperature toughness. This paper describes the metallurgical design and development of high deformable high strength X100 line pipe with lower Mo content suitable for strain-based design. High deformable X100 line pipe with 16 mm wall thickness as well as good low temperature toughness and seam weld toughness has been developed.

Sign in / Sign up

Export Citation Format

Share Document