Probabilistic Condition Assessment of Aging Equipment Considering the Effect of Operating Conditions and Maintenance

2012 ◽  
Author(s):  
Pedro A. Pérez Ramírez ◽  
Roy Johnsen ◽  
Ingrid B. Utne
Keyword(s):  
Technical Condition ◽  
Remaining Useful Life ◽  
Operating Conditions ◽  
Physical Models ◽  
Life Extension ◽  
Degradation Mechanisms ◽  
Reliable Assessment ◽  
Proposed Model ◽  
Useful Life ◽  
Operational Data

Assessing the technical condition and remaining useful life of aging equipment is crucial for the life extension of O&G facilities. In order to perform a reliable assessment, models describing the degradation of the equipment are necessary. However, the use of accurate physical models for this purpose may be challenging. Some reasons are that the equipment can be exposed to various degradation mechanisms, which may be influenced by different operating conditions, and that the operational data may be scarce. This paper presents a systematic approach for modelling different degradation mechanisms, assessing the technical condition of a component, and quantifying the expected remaining useful life. The quantification is performed using a Bayesian network. Finally, the application of the proposed model is illustrated with the analysis of a fire water pump.

Prognostics and RUL Estimations of SAC305, SAC105 and SnAg Solders Under Temperature and Vibration Using Long Short-Term Memory (LSTM) Deep Learning

2021 ◽  
Author(s):  
Pradeep Lall ◽  
Tony Thomas ◽  
Ken Blecker
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Short Term Memory ◽  
Remaining Useful Life ◽  
Operating Conditions ◽  
Short Term ◽  
Term Memory ◽  
Rectangular Pattern ◽  
Useful Life ◽  
Long Short Term Memory

Abstract Prognostics and Remaining Useful Life (RUL) estimations of complex systems are essential to operational safety, increased efficiency, and help to schedule maintenance proactively. Modeling the remaining useful life of a system with many complexities is possible with the rapid development in the field of deep learning as a computational technique for failure prediction. Deep learning can adapt to multivariate parameters complex and nonlinear behavior, which is difficult using traditional time-series models for forecasting and prediction purposes. In this paper, a deep learning approach based on Long Short-Term Memory (LSTM) network is used to predict the remaining useful life of the PCB at different conditions of temperature and vibration. This technique can identify the different underlying patterns in the time series that can predict the RUL. This study involves feature vector identification and RUL estimations for SAC305, SAC105, and Tin Lead solder PCBs under different vibration levels and temperature conditions. The acceleration levels of vibration are fixed at 5g and 10g, while the temperature levels are 55°C and 100°C. The test board is a multilayer FR4 configuration with JEDEC standard dimensions consists of twelve packages arranged in a rectangular pattern. Strain signals are acquired from the backside of the PCB at symmetric locations to identify the failure of all the packages during vibration. The strain signals are resistance values that are acquired simultaneously during the experiment until the failure of most of the packages on the board. The feature vectors are identified from statistical analysis on the strain signals frequency and instantaneous frequency components. The principal component analysis is used as a data reduction technique to identify the different patterns produced from the four strain signals with failures of the packages during vibration. LSTM deep learning method is used to model the RUL of the packages at different individual operating conditions of vibration for all three solder materials involved in this study. A combined model for RUL prediction for a material that can take care of the changes in the operating conditions is also modeled for each material.

scholarly journals Transfer Learning with Deep Recurrent Neural Networks for Remaining Useful Life Estimation

2018 ◽  
Vol 8 (12) ◽  
pp. 2416 ◽  
Author(s):  
Ansi Zhang ◽  
Honglei Wang ◽  
Shaobo Li ◽  
Yuxin Cui ◽  
Zhonghao Liu ◽  
...  
Keyword(s):  
Neural Networks ◽  
Transfer Learning ◽  
Recurrent Neural Networks ◽  
Prediction Models ◽  
Learning Algorithm ◽  
Remaining Useful Life ◽  
Operating Conditions ◽  
Training Data ◽  
Good Prediction ◽  
Useful Life

Prognostics, such as remaining useful life (RUL) prediction, is a crucial task in condition-based maintenance. A major challenge in data-driven prognostics is the difficulty of obtaining a sufficient number of samples of failure progression. However, for traditional machine learning methods and deep neural networks, enough training data is a prerequisite to train good prediction models. In this work, we proposed a transfer learning algorithm based on Bi-directional Long Short-Term Memory (BLSTM) recurrent neural networks for RUL estimation, in which the models can be first trained on different but related datasets and then fine-tuned by the target dataset. Extensive experimental results show that transfer learning can in general improve the prediction models on the dataset with a small number of samples. There is one exception that when transferring from multi-type operating conditions to single operating conditions, transfer learning led to a worse result.

scholarly journals Remaining Useful Life Prediction for Rotating Machinery Based on Optimal Degradation Indicator

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Aisong Qin ◽  
Qinghua Zhang ◽  
Qin Hu ◽  
Guoxi Sun ◽  
Jun He ◽  
...  
Keyword(s):  
Health Management ◽  
Rotating Machinery ◽  
Remaining Useful Life ◽  
Programming Algorithm ◽  
Wiener Model ◽  
New Approach ◽  
Degradation Modeling ◽  
Proposed Model ◽  
Useful Life ◽  
Degradation Indicator

Remaining useful life (RUL) prediction can provide early warnings of failure and has become a key component in the prognostics and health management of systems. Among the existing methods for RUL prediction, the Wiener-process-based method has attracted great attention owing to its favorable properties and flexibility in degradation modeling. However, shortcomings exist in methods of this type; for example, the degradation indicator and the first predicting time (FPT) are selected subjectively, which reduces the prediction accuracy. Toward this end, this paper proposes a new approach for predicting the RUL of rotating machinery based on an optimal degradation indictor. First, a genetic programming algorithm is proposed to construct an optimal degradation indicator using the concept of FPT. Then, a Wiener model based on the obtained optimal degradation indicator is proposed, in which the sensitivities of the dimensionless parameters are utilized to determine the FPT. Finally, the expectation of the predicted RUL is calculated based on the proposed model, and the estimated mean degradation path is explicitly derived. To demonstrate the validity of this model, several experiments on RUL prediction are conducted on rotating machinery. The experimental results indicate that the method can effectively improve the accuracy of RUL prediction.

scholarly journals A Hybrid Remaining Useful Life Prediction Method for Cutting Tool Considering the Wear State

2022 ◽  
Author(s):  
Yifan Li ◽  
Yongyong Xiang ◽  
Baisong Pan ◽  
Luojie Shi
Keyword(s):  
Tool Wear ◽  
High Speed ◽  
Cutting Tool ◽  
Bayesian Framework ◽  
Remaining Useful Life ◽  
Physical Models ◽  
Data Driven ◽  
Support Vector ◽  
Wear Model ◽  
Useful Life

Abstract Accurate cutting tool remaining useful life (RUL) prediction is of significance to guarantee the cutting quality and minimize the production cost. Recently, physics-based and data-driven methods have been widely used in the tool RUL prediction. The physics-based approaches may not accurately describe the time-varying wear process due to a lack of knowledge for underlying physics and simplifications involved in physical models, while the data-driven methods may be easily affected by the quantity and quality of data. To overcome the drawbacks of these two approaches, a hybrid prognostics framework considering tool wear state is developed to achieve an accurate prediction. Firstly, the mapping relationship between the sensor signal and tool wear is established by support vector regression (SVR). Then, the tool wear statuses are recognized by support vector machine (SVM) and the results are put into a Bayesian framework as prior information. Thirdly, based on the constructed Bayesian framework, parameters of the tool wear model are updated iteratively by the sliding time window and particle filter algorithm. Finally, the tool wear state space and RUL can be predicted accordingly using the updating tool wear model. The validity of the proposed method is demonstrated by a high-speed machine tool experiment. The results show that the presented approach can effectively reduce the uncertainty of tool wear state estimation and improve the accuracy of RUL prediction.

scholarly journals Deep learning-based anomaly-onset aware remaining useful life estimation of bearings

2021 ◽  
Vol 7 ◽  
pp. e795
Author(s):  
Pooja Vinayak Kamat ◽  
Rekha Sugandhi ◽  
Satish Kumar
Keyword(s):  
Deep Learning ◽  
Anomaly Detection ◽  
Short Term Memory ◽  
Rotating Machinery ◽  
Remaining Useful Life ◽  
Operating Conditions ◽  
Learning Models ◽  
Vibration Data ◽  
Degradation Data ◽  
Useful Life

Remaining Useful Life (RUL) estimation of rotating machinery based on their degradation data is vital for machine supervisors. Deep learning models are effective and popular methods for forecasting when rotating machinery such as bearings may malfunction and ultimately break down. During healthy functioning of the machinery, however, RUL is ill-defined. To address this issue, this study recommends using anomaly monitoring during both RUL estimator training and operation. Essential time-domain data is extracted from the raw bearing vibration data, and deep learning models are used to detect the onset of the anomaly. This further acts as a trigger for data-driven RUL estimation. The study employs an unsupervised clustering approach for anomaly trend analysis and a semi-supervised method for anomaly detection and RUL estimation. The novel combined deep learning-based anomaly-onset aware RUL estimation framework showed enhanced results on the benchmarked PRONOSTIA bearings dataset under non-varying operating conditions. The framework consisting of Autoencoder and Long Short Term Memory variants achieved an accuracy of over 90% in anomaly detection and RUL prediction. In the future, the framework can be deployed under varying operational situations using the transfer learning approach.

Methods for Diagnosing the Technical Condition of Spacecraft Electric Pump Units and Predicting Their Remaining Useful Life

2020 ◽  
Vol 63 (4) ◽  
pp. 561-567
Author(s):  
S. A. Matveev ◽  
N. A. Testoedov ◽  
D. V. Vasil’kov ◽  
O. V. Shirobokov ◽  
M. I. Nadezhin
Keyword(s):  
Technical Condition ◽  
Remaining Useful Life ◽  
Electric Pump ◽  
Useful Life

Fitness-for-Service and Remaining Useful Life Assessment of a Steam Drum

2003 ◽  
Author(s):  
Raymond K. Yee
Keyword(s):  
Power Plant ◽  
Small Sample ◽  
Analysis Procedure ◽  
Remaining Useful Life ◽  
Operating Conditions ◽  
Life Assessment ◽  
Life Evaluation ◽  
Useful Life ◽  
Size Evaluation ◽  
Steam Drum

A steam drum in a typical power plant has experienced in-service cracking. Nondestructive examinations (NDE) were performed and a small sample was collected from the drum to evaluate the extent of the cracking that had occurred in the drum shell. Fitness-for-service and remaining useful life analyses of the drum were performed based on the NDE results and operating conditions. In this paper, the fitness-for-service analyses of the steam drum are described. The analysis procedure, material property determination, stress analysis, limiting flaw size evaluation, and remaining useful life evaluation for the drum are discussed. Recommendations for appropriate action are also presented.

Sign in / Sign up

Export Citation Format

Share Document