Revised Guidance on Residual Stresses in BS7910

2011 ◽  
Author(s):  
John Sharples ◽  
Peter Gill ◽  
Liwu Wei ◽  
Steve Bate
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Welded Joints ◽  
Stress Distributions ◽  
Metallic Structures ◽  
British Standard ◽  
Major Revision ◽  
Weld Residual Stress ◽  
Stress Profiles

A major revision of the British Standard BS7910 on “Guide to Methods for Assessing the Acceptability of Flaws in Metallic Structures” is being planned for issue in 2012. This paper provides an overview of the proposed revised guidance in relation to recommended weld residual stress profiles. As such, the paper is focussed on the proposed revised Annex Q of BS7910 which deals with residual stress distributions in as-welded joints.

On the Mechanics of Residual Stresses in Girth Welds

2006 ◽  
Vol 129 (3) ◽  
pp. 345-354 ◽  
Author(s):  
P. Dong
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Relative Importance ◽  
Stress Distributions ◽  
Unified Framework ◽  
Joint Geometry ◽  
Weld Residual Stress ◽  
Girth Welds ◽  
Welding Procedure

In this paper, some of the important controlling parameters governing weld residual stress distributions are presented for girth welds in pipe and vessel components, based on a large number of residual stress solutions available to date. The focus is placed upon the understanding of some of the overall characteristics in through-wall residual stress distributions and their generalization for vessel and pipe girth welds. In doing so, a unified framework for prescribing residual stress distributions is outlined for fitness-for-service assessment of vessel and pipe girth welds. The effects of various joint geometry and welding procedure parameters on through thickness residual stress distributions are also demonstrated in the order of their relative importance.

On the Mechanics of Residual Stresses in Girth Welds

2004 ◽  
Author(s):  
P. Dong
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Relative Importance ◽  
Stress Distributions ◽  
Unified Framework ◽  
Joint Geometry ◽  
Weld Residual Stress ◽  
Girth Welds ◽  
Welding Procedure

In this paper, some of the important controlling parameters in governing weld residual stress distributions are presented for girth welds in pipe and vessel components, based on a large number of residual stress solutions available to date. The focus is placed upon the understanding of some of the overall characteristics in through-wall residual stress distributions and their generalization for vessel and pipe girth welds. In doing so, a unified framework for prescribing residual stress distributions is then outlined for fitness-for-service assessment of vessel and pipe girth welds. The effects of various joint geometry and welding procedure parameters on through thickness residual stress distributions are also demonstrated in the order of their relative importance.

Measurement of Welding Residual Stress in Reactor Components

2011 ◽  
Author(s):  
Adrian T. DeWald ◽  
Michael R. Hill
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Stress Measurement ◽  
The United States ◽  
Welding Residual Stress ◽  
Contour Method ◽  
Two Dimensional ◽  
Stress Distributions ◽  
Weld Residual Stress ◽  
Metal Weld

Welding residual stresses can significantly impact the performance of structural components. Tensile residual stresses are of particular concern due to their ability to cause significant degradation to the PWSCC resistance of structural materials. The contour method is a residual stress measurement technique capable of generating two dimensional maps of residual stress, which is particularly useful when applied to welds due to the complex residual stress distributions that generally result. The two-dimensional capability of the contour method enables detailed visualization of complex weld residual stress fields. This data can be used to identify locations and magnitude of tensile residual stress hot-spots. This paper provides a summary of the contour method and presents detailed results of contour method measurements made on the dissimilar metal weld region of pressurizer relief nozzles removed from the cancelled WNP-3 plant in the United States as part of the NRC/EPRI weld residual stress (WRS) program [1].

Measurement of Welding Residual Stress in Dissimilar Metal Welds Using the Contour Method

2011 ◽  
Author(s):  
Adrian T. DeWald ◽  
Michael R. Hill ◽  
Eric Willis
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Stress Measurement ◽  
The United States ◽  
Welding Residual Stress ◽  
Contour Method ◽  
Two Dimensional ◽  
Stress Distributions ◽  
Dissimilar Metal ◽  
Weld Residual Stress

Welding residual stresses can significantly impact the performance of structural components. Tensile residual stresses are of particular concern due to their ability to cause significant degradation to the PWSCC resistance of structural materials. The contour method is a residual stress measurement technique capable of generating two dimensional maps of residual stress, which is particularly useful when applied to welds due to the complex residual stress distributions that generally result. The two-dimensional capability of the contour method enables detailed visualization of complex weld residual stress fields. This data can be used to identify locations and magnitude of tensile residual stress hot-spots. This paper provides a summary of the contour method and presents detailed results of contour method measurements made on the dissimilar metal weld region of pressurizer relief nozzles removed from the cancelled WNP-3 plant in the United States as part of the NRC/EPRI weld residual stress (WRS) program [1].

Local Stress Variations at Bead Interruptions in Austenitic Multi-Pass Groove Welds

2009 ◽  
Author(s):  
Christopher M. Gill ◽  
Paul Hurrell ◽  
John Francis ◽  
Mark Turski
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Neutron Diffraction ◽  
Residual Stresses ◽  
Good Practice ◽  
304 Stainless Steel ◽  
Stress Profile ◽  
Stress Distributions ◽  
Fe Modelling ◽  
Stress Profiles

This paper presents finite element analyses of residual stress in an austenitic multi-pass groove weld. The aim was to establish the effect upon the residual stress of stop-start interruptions during the deposition of weld beads. Comparison of measured residual stress profiles with the residual stress distributions predicted by finite element (FE) modelling aimed to validate the FE method for predicting residual stresses around stop-start features. This paper presents a comparison of measured and modelled residual stress distributions in a series of simple welded 304 stainless steel plates. The plates were machined with a v-groove designed to be filled using eight weld passes. Samples which included interrupted weld beads contained two stop-start features in the fifth pass. In the first feature the welding power was ramped down over 15 seconds; this represented normal welding good practice. The second feature investigated was an abrupt stop, where the welding power was removed instantaneously; this represented an extreme stop. Three welded plates were considered. One contained five weld passes, such that the final pass contained stop-start features and resulted in partially filling the weld groove. Two welds plates each containing eight passes have also been considered; one contained stop-start features in the fifth pass and the other contained no stop-start features. This allowed a comparison of the effect of stop-start features and the effect that subsequent beads have upon any perturbations in the residual stresses produced. Residual stress measurements have been performed using neutron diffraction. 3D weld modelling has been carried out using VFT and the Abaqus finite element package. Results from the welding FE analyses were compared with the neutron diffraction measurements. Good agreement between the modelled and measured residual stresses is achieved in the uninterrupted 8-pass sample and after deposition of the bead containing stop-start features in the 5-pass sample. Following deposition of subseqeunt beads perturbations in the residual stress profile are retained in the neutron diffraction measurements, but all perturbations are removed from the residual stress profiles predicted using both VFT and Sysweld. This work suggests that modelling welding stop-start features is only necessary in the final weld capping passes, if residual stresses over a short length scale are of interest.

Instability Parameter for Machined Parts

1983 ◽  
Vol 105 (3) ◽  
pp. 133-136 ◽  
Author(s):  
A. Israeli ◽  
J. Benedek
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Single Point ◽  
Machining Parameters ◽  
Machining Processes ◽  
Etching Technique ◽  
Parametric Relationship ◽  
Machined Parts ◽  
Instability Parameter ◽  
Stress Profiles

The production of precision parts requires manufacturing processes which produce low residual stresses. This study was designed to investigate the parametric relationship between machining processes and residual stress distribution. Sets of steel specimens were single point turned at different feeds. The residual stress profiles of these specimens were monitored, using a continuous etching technique. A “Specific Instability Potential” parameter, derived from the strain energy of the residual stresses, was found to relate directly to the machining parameters. It is suggested that the Specific Instability Potential can be used as a parameter for specifying processing operations.

Finite Element Analyses of Residual Stresses in Typical Welded Joints Used in Nuclear Power Plants and Comparisons With Experiments

2010 ◽  
Author(s):  
Dean Deng ◽  
Kazuo Ogawa ◽  
Nobuyoshi Yanagida ◽  
Koichi Saito
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Residual Stresses ◽  
Welded Joints ◽  
Nuclear Power ◽  
Power Plants ◽  
Butt Joint ◽  
Welding Residual Stress ◽  
Dissimilar Metal ◽  
Water Reactors

Recent discoveries of stress corrosion cracking (SCC) at nickel-based metals in pressurized water reactors (PWRs) and boiling water reactors (BWRs) have raised concerns about safety and integrity of plant components. It has been recognized that welding residual stress is an important factor causing the issue of SCC in a weldment. In this study, both numerical simulation technology and experimental method were employed to investigate the characteristics of welding residual stress distribution in several typical welded joints, which are used in nuclear power plants. These joints include a thick plate butt-welded Alloy 600 joint, a dissimilar metal J-groove set-in joint and a dissimilar metal girth-butt joint. First of all, numerical simulation technology was used to predict welding residual stresses in these three joints, and the influence of heat source model on welding residual stress was examined. Meanwhile, the influence of other thermal processes such as cladding, buttering and heat treatment on the final residual stresses in the dissimilar metal girth-butt joint was also clarified. Secondly, we also measured the residual stresses in three corresponding mock-ups. Finally, the comparisons of the simulation results and the measured data have shed light on how to effectively simulate welding residual stress in these typical joints.

scholarly journals Residual Stress State of X65 Pipeline Girth Welds Before and After Local and Furnace Post Weld Heat Treatment

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Yao Ren ◽  
Anna Paradowska ◽  
Bin Wang ◽  
Elvin Eren ◽  
Yin Jin Janin
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Residual Stresses ◽  
Outer Surface ◽  
Post Weld Heat Treatment ◽  
Pipe Length ◽  
Stress Profiles ◽  
Girth Welds ◽  
Welded Pipe ◽  
Weld Heat

This research investigated the effects of global (in other words, furnace-based) and local post weld heat treatment (PWHT) on residual stress (RS) relaxation in API 5L X65 pipe girth welds. All pipe spools were fabricated using identical pipeline production procedures for manufacturing multipass narrow gap welds. Nondestructive neutron diffraction (ND) strain scanning was carried out on girth welded pipe spools and strain-free comb samples for the determination of the lattice spacing. All residual stress measurements were carried out at the KOWARI strain scanning instrument at the Australian Nuclear Science and Technology Organization (ANSTO). Residual stresses were measured on two pipe spools in as-welded condition and two pipe spools after local and furnace PWHT. Measurements were conducted through the thickness in the weld material and adjacent parent metal starting from the weld toes. Besides, three line-scans along pipe length were made 3 mm below outer surface, at pipe wall midthickness, and 3 mm above the inner surface. PWHT was carried out for stress relief; one pipe was conventionally heat treated entirely in an enclosed furnace, and the other was locally heated by a flexible ceramic heating pad. Residual stresses measured after PWHT were at exactly the same locations as those in as-welded condition. Residual stress states of the pipe spools in as-welded condition and after PWHT were compared, and the results were presented in full stress maps. Additionally, through-thickness residual stress profiles and the results of one line scan (3 mm below outer surface) were compared with the respective residual stress profiles advised in British Standard BS 7910 “Guide to methods for assessing the acceptability of flaws in metallic structures” and the UK nuclear industry's R6 procedure. The residual stress profiles in as-welded condition were similar. With the given parameters, local PWHT has effectively reduced residual stresses in the pipe spool to such a level that it prompted the thought that local PWHT can be considered a substitute for global PWHT.

Surface Modification Analysis after Shot Peening of AA 7075 in Different States

2013 ◽  
Vol 768-769 ◽  
pp. 519-525 ◽  
Author(s):  
Sebastjan Žagar ◽  
Janez Grum
Keyword(s):  
Residual Stress ◽  
Surface Layer ◽  
Residual Stresses ◽  
Aluminium Alloy ◽  
Shot Peening ◽  
Fatigue Testing ◽  
Stress Profile ◽  
Treatment Conditions ◽  
Stress Profiles ◽  
Compressive Residual Stresses

The paper deals with the effect of different shot peening (SP) treatment conditions on the ENAW 7075-T651 aluminium alloy. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. The objective of the research was to establish the optimal parameters of the shot peening treatment of the aluminium alloy in different precipitation hardened states with regard to residual stress profiles in dynamic loading. Main deformations and main residual stresses were calculated on the basis of electrical resistance. The resulting residual stress profiles reveal that stresses throughout the thin surface layer of all shot peened specimens are of compressive nature. The differences can be observed in the depth of shot peening and the profile of compressive residual stresses. Under all treatment conditions, the obtained maximum value of compressive residual stress ranges between -200 MPa and -300 MPa at a depth between 250 μm and 300 μm. Comparison of different temperature-hardened aluminium alloys shows that changes in the Almen intensity values have greater effect than coverage in the depth and profile of compressive residual stresses. Positive stress ratio of R=0.1 was selected. Wöhler curves were determined in the areas of maximum bending loads between 30 - 65 % of material's tensile strength, measured at thinner cross-sections of individual specimens. The results of material fatigue testing differ from the level of shot peening on the surface layer.

Residual stresses in Al2O3/Y-TZP Ceramic Laminates Fabricated by Tape and Slip Casting

2008 ◽  
Vol 571-572 ◽  
pp. 327-332 ◽  
Author(s):  
Jesus Ruiz-Hervias ◽  
Giovanni Bruno ◽  
Jonas Gurauskis ◽  
A.J. Sanchez-Herencia ◽  
C. Baudin
Keyword(s):  
Residual Stress ◽  
Neutron Diffraction ◽  
Residual Stresses ◽  
Volume Fraction ◽  
Tape Casting ◽  
Slip Casting ◽  
Ceramic Composites ◽  
Processing Route ◽  
Alumina Matrix ◽  
Stress Profiles

Residual stress profiles were measured by neutron diffraction in Al2O3/Y-TZP ceramic composites containing 5 and 40 vol.% Y-TZP fabricated by conventional slip casting and by a novel tape casting route. Residual stresses in the zirconia are tensile and increase as its volume fraction decreases. For the alumina matrix, residual stress is compressive and increases with the zirconia volume fraction. In the composite with 5 vol.% zirconia, the processing route does not have an influence on residual stresses. However, in the composite with 40 vol.% zirconia, residual stresses are different in the samples obtained by both processing routes.

Sign in / Sign up

Export Citation Format

Share Document