A Study on Leakage Flow Induced Vibration From Engineering Viewpoint

2015 ◽  
Author(s):  
Fumio Inada
Keyword(s):  
Damping Ratio ◽  
Axial Flow ◽  
Engineering System ◽  
Dimensional System ◽  
Leakage Flow ◽  
Fluid Inertia ◽  
Flow Induced Vibration ◽  
One Dimensional ◽  
Annular Gap ◽  
Excited Vibration

Leakage-flow-induced vibration for a relatively short gap is studied analytically to provide useful information to design structures that include a leakage flow. The relationship between the analysis of a one-dimensional system and that of an annular gap is explained first. Then, the mechanism of flutter-type instability is reproduced from previous study after correcting an error. Finally, the self-excited vibration potential of an engineering system is shown from sample calculations. It is shown that an axial flow becomes dominant in the short-gap approximation, and in this case, the analysis of a one-dimensional flow can be expanded to that of an annular flow. The result that negative damping can occur in the case of a divergent passage owing to the delay induced by fluid inertia was obtained from a previous study. It was suggested analytically that the damping ratio could become negative and its absolute value could become more than 10% in a system that is frequently encountered in a plant, if the natural frequency decreases. The value could be sufficient to generate self-excited vibration.

Axial Leakage Flow-Induced Vibration of a Thin Cylindrical Shell With Respect to Axisymmetric Vibration

2003 ◽  
Vol 125 (2) ◽  
pp. 151-157 ◽  
Author(s):  
Katsuhisa Fujita ◽  
Atsuhiko Shintani ◽  
Masakazu Ono
Keyword(s):  
Cylindrical Shell ◽  
Axial Flow ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Axisymmetric Vibration ◽  
Thin Cylindrical Shell ◽  
Flow Induced Vibration ◽  
Navier Stokes Equation ◽  
Coupled Equations ◽  
Stiffness Matrices

In this paper, the stability of a thin cylindrical shell subjected to axial leakage flow is discussed. In this paper, the first part of a study of the axial leakage flow-induced vibration of a thin cylindrical shell, we focus on axisymmetric vibration, that is, the ringlike vibration of a shell. The coupled equations between a shell and a fluid are obtained by using the Donnell’s shell theory and the Navier-Stokes equation. The added mass, added damping and added stiffness matrices in the coupled equations are described by utilizing unsteady fluid forces on a shell. The influence of the axial flow velocity on the unstable phenomena is clarified concerning axisymmetric vibration mode of shell. The numerical calculations are performed taking the dimensions of shell and fluid as parameters.

Stabilization of Dominant Structures in an Ionic Reaction-Diffusion System

1998 ◽  
Vol 63 (6) ◽  
pp. 761-769 ◽  
Author(s):  
Roland Krämer ◽  
Arno F. Münster
Keyword(s):  
Reaction Diffusion ◽  
Dominant Mode ◽  
Reaction Diffusion System ◽  
Diffusion System ◽  
Local Perturbation ◽  
Dimensional System ◽  
One Dimensional ◽  
Brusselator Model ◽  
The One ◽  
Dominant Structure

We describe a method of stabilizing the dominant structure in a chaotic reaction-diffusion system, where the underlying nonlinear dynamics needs not to be known. The dominant mode is identified by the Karhunen-Loeve decomposition, also known as orthogonal decomposition. Using a ionic version of the Brusselator model in a spatially one-dimensional system, our control strategy is based on perturbations derived from the amplitude function of the dominant spatial mode. The perturbation is used in two different ways: A global perturbation is realized by forcing an electric current through the one-dimensional system, whereas the local perturbation is performed by modulating concentrations of the autocatalyst at the boundaries. Only the global method enhances the contribution of the dominant mode to the total fluctuation energy. On the other hand, the local method leads to simple bulk oscillation of the entire system.

scholarly journals Topological phase transition between a normal insulator and a topological metal state in a quasi-one-dimensional system

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Milad Jangjan ◽  
Mir Vahid Hosseini
Keyword(s):  
Phase Transition ◽  
Dimensional System ◽  
Inversion Symmetry ◽  
Topological Phase ◽  
Edge States ◽  
Zero Energy ◽  
One Dimensional ◽  
Topological Phase Transition ◽  
Metal State ◽  
Topological Metal

AbstractWe theoretically report the finding of a new kind of topological phase transition between a normal insulator and a topological metal state where the closing-reopening of bandgap is accompanied by passing the Fermi level through an additional band. The resulting nontrivial topological metal phase is characterized by stable zero-energy localized edge states that exist within the full gapless bulk states. Such states living on a quasi-one-dimensional system with three sublattices per unit cell are protected by hidden inversion symmetry. While other required symmetries such as chiral, particle-hole, or full inversion symmetry are absent in the system.

scholarly journals AdS2 × S2 × CY2 solutions in Type IIB with 8 supersymmetries

2021 ◽  
Vol 2021 (4) ◽  
Author(s):  
Yolanda Lozano ◽  
Carlos Nunez ◽  
Anayeli Ramirez
Keyword(s):  
Quantum Mechanics ◽  
Riemann Surface ◽  
Central Charge ◽  
Global Solutions ◽  
Infinite Family ◽  
Dimensional System ◽  
One Dimensional

Abstract We present a new infinite family of Type IIB supergravity solutions preserving eight supercharges. The structure of the space is AdS2 × S2 × CY2 × S1 fibered over an interval. These solutions can be related through double analytical continuations with those recently constructed in [1]. Both types of solutions are however dual to very different superconformal quantum mechanics. We show that our solutions fit locally in the class of AdS2 × S2 × CY2 solutions fibered over a 2d Riemann surface Σ constructed by Chiodaroli, Gutperle and Krym, in the absence of D3 and D7 brane sources. We compare our solutions to the global solutions constructed by Chiodaroli, D’Hoker and Gutperle for Σ an annulus. We also construct a cohomogeneity-two family of solutions using non-Abelian T-duality. Finally, we relate the holographic central charge of our one dimensional system to a combination of electric and magnetic fluxes. We propose an extremisation principle for the central charge from a functional constructed out of the RR fluxes.

scholarly journals Topological correlators and surface defects from equivariant cohomology

2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
Rodolfo Panerai ◽  
Antonio Pittelli ◽  
Konstantina Polydorou
Keyword(s):  
Quantum Mechanics ◽  
Equivariant Cohomology ◽  
Surface Defects ◽  
Star Product ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Dimensional System ◽  
The Novel ◽  
One Dimensional ◽  
Dual Quantum

Abstract We find a one-dimensional protected subsector of $$ \mathcal{N} $$ N = 4 matter theories on a general class of three-dimensional manifolds. By means of equivariant localization we identify a dual quantum mechanics computing BPS correlators of the original model in three dimensions. Specifically, applying the Atiyah-Bott-Berline-Vergne formula to the original action demonstrates that this localizes on a one-dimensional action with support on the fixed-point submanifold of suitable isometries. We first show that our approach reproduces previous results obtained on S3. Then, we apply it to the novel case of S2× S1 and show that the theory localizes on two noninteracting quantum mechanics with disjoint support. We prove that the BPS operators of such models are naturally associated with a noncom- mutative star product, while their correlation functions are essentially topological. Finally, we couple the three-dimensional theory to general $$ \mathcal{N} $$ N = (2, 2) surface defects and extend the localization computation to capture the full partition function and BPS correlators of the mixed-dimensional system.

scholarly journals Effects of Tip Leakage Flow on the Aerodynamic Performance and Stability of an Axial-Flow Transonic Compressor Stage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4168
Author(s):  
Botao Zhang ◽  
Xiaochen Mao ◽  
Xiaoxiong Wu ◽  
Bo Liu
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Transonic Compressor

To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.

scholarly journals Finite Element Analysis of Thermoelastic Contact Stability

1994 ◽  
Vol 61 (4) ◽  
pp. 919-922 ◽  
Author(s):  
Taein Yeo ◽  
J. R. Barber
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Steady State ◽  
Eigenvalue Problem ◽  
Linear Perturbation ◽  
Dimensional System ◽  
The Finite Element Method ◽  
One Dimensional ◽  
Thermoelastic Contact ◽  
Element Method

When heat is conducted across an interface between two dissimilar materials, theimoelastic distortion affects the contact pressure distribution. The existence of a pressure-sensitive thermal contact resistance at the interface can cause such systems to be unstable in the steady-state. Stability analysis for thermoelastic contact has been conducted by linear perturbation methods for one-dimensional and simple two-dimensional geometries, but analytical solutions become very complicated for finite geometries. A method is therefore proposed in which the finite element method is used to reduce the stability problem to an eigenvalue problem. The linearity of the underlying perturbation problem enables us to conclude that solutions can be obtained in separated-variable form with exponential variation in time. This factor can therefore be removed from the governing equations and the finite element method is used to obtain a time-independent set of homogeneous equations in which the exponential growth rate appears as a linear parameter. We therefore obtain a linear eigenvalue problem and stability of the system requires that all the resulting eigenvalues should have negative real part. The method is discussed in application to the simple one-dimensional system of two contacting rods. The results show good agreement with previous analytical investigations and give additional information about the migration of eigenvalues in the complex plane as the steady-state heat flux is varied.

Sign in / Sign up

Export Citation Format

Share Document