Development and Test of Liquefied Gas Leakage Rate Measurement Device for Limited Aperture Release

2020 ◽  
Author(s):  
Cenfan Liu ◽  
Fang Ji ◽  
Linlin Duan ◽  
Sheng Chen ◽  
Liang Sun
Keyword(s):  
Real Time ◽  
Gas Discharge ◽  
Leakage Rate ◽  
Rate Measurement ◽  
Flow Meter ◽  
Measurement Device ◽  
New Device ◽  
Gas Leakage ◽  
Before And After ◽  
Liquefied Gas

Abstract The liquefied gas has been widely used in modern chemical, energy and environment protection industries. To support the integrity management and risk assessment of liquefied gas storage tanks, it is necessary to study the leakage process of liquefied gas with limited holes. There are few researches about the liquefied gas leakage rate from the crack. At present, most measurement methods used to measure leakage rate are flow meter or weighing before and after discharge, which are not suitable for liquefied gas discharge. The discharge of liquefied gas can easily form a two-phase flow in the crack and cannot be measured by the flow meter. However, the method of weighing before and after discharge cannot measure the leakage rate in real time. To realize the leakage rate real-time, online measurement, the new liquefied gas leakage rate measurement device was set up in this study. And the detachable crack leakage modules with different diameters were designed and manufactured. Using R134a refrigerant as leakage experiment medium, the relationship between crack morphology, size, pressure and leakage rate of liquefied gas was studied on the liquefied gas leakage measurement device. The new device can be used as an experimental test platform for evaluating the consequences of different liquefied gas discharge accidents or optimizing the leakage flow coefficient of the specific leakage situation, so as to better simulate the liquefied gas discharge accidents.

scholarly journals Influence of extracorporeal membrane oxygenation on serum microRNA expression

2019 ◽  
Vol 47 (12) ◽  
pp. 6109-6119
Author(s):  
M. Scettri ◽  
H. Seeba ◽  
D. L. Staudacher ◽  
S. Robinson ◽  
D. Stallmann ◽  
...  
Keyword(s):  
Extracorporeal Membrane Oxygenation ◽  
Real Time ◽  
Underlying Disease ◽  
Real Time Quantitative Pcr ◽  
Membrane Oxygenation ◽  
Serum Microrna ◽  
Clinical Biomarkers ◽  
Differentially Expressed Mirnas ◽  
Before And After ◽  
Medical Intensive Care

Objective To date, no biomarkers have been established to predict haematological complications and outcomes of extracorporeal membrane oxygenation (ECMO). The aim of this study was to investigate the expression of a panel of microRNAs (miRNAs), which are promising biomarkers in many clinical fields, in patients before and after initiating ECMO. Methods Serum miRNA levels from 14 patients hospitalized for acute respiratory failure and supported with ECMO in our medical intensive care unit were analysed before and 24 hours after ECMO. In total, 179 serum-enriched miRNAs were profiled by using a real-time PCR panel. For validation, differentially expressed miRNAs were individually quantified with conventional real-time quantitative PCR at 0, 24, and 72 hours. Results Under ECMO support, platelet count significantly decreased by 65 × 103/µL (25th percentile = 154.3 × 103/µL; 75th percentile = 33 × 103/µL). Expression of the 179 miRNAs investigated in this study did not change significantly throughout the observational period. Conclusions According to our data, the expression of serum miRNAs was not altered by ECMO therapy itself. We conclude that ECMO does not limit the application of miRNAs as specific clinical biomarkers for the patients’ underlying disease.

scholarly journals Real-Time High-Level Acute Pain Detection Using a Smartphone and a Wrist-Worn Electrodermal Activity Sensor

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3956
Author(s):  
Youngsun Kong ◽  
Hugo F. Posada-Quintero ◽  
Ki H. Chon
Keyword(s):  
Real Time ◽  
Electrodermal Activity ◽  
Smartphone Application ◽  
Real Time Processing ◽  
Pain Stimulation ◽  
Significant Difference ◽  
Before And After ◽  
Electrical Pulses ◽  
Pain Detection ◽  
High Level

The subjectiveness of pain can lead to inaccurate prescribing of pain medication, which can exacerbate drug addiction and overdose. Given that pain is often experienced in patients’ homes, there is an urgent need for ambulatory devices that can quantify pain in real-time. We implemented three time- and frequency-domain electrodermal activity (EDA) indices in our smartphone application that collects EDA signals using a wrist-worn device. We then evaluated our computational algorithms using thermal grill data from ten subjects. The thermal grill delivered a level of pain that was calibrated for each subject to be 8 out of 10 on a visual analog scale (VAS). Furthermore, we simulated the real-time processing of the smartphone application using a dataset pre-collected from another group of fifteen subjects who underwent pain stimulation using electrical pulses, which elicited a VAS pain score level 7 out of 10. All EDA features showed significant difference between painless and pain segments, termed for the 5-s segments before and after each pain stimulus. Random forest showed the highest accuracy in detecting pain, 81.5%, with 78.9% sensitivity and 84.2% specificity with leave-one-subject-out cross-validation approach. Our results show the potential of a smartphone application to provide near real-time objective pain detection.

scholarly journals SURG-03. IMMERSIVE VIRTUAL REALITY APPLICATIONS IN NEUROSURGICAL ONCOLOGY

2020 ◽  
Vol 22 (Supplement_3) ◽  
pp. iii461-iii461
Author(s):  
Andrea Carai ◽  
Angela Mastronuzzi ◽  
Giovanna Stefania Colafati ◽  
Paul Voicu ◽  
Nicola Onorini ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Real Time ◽  
New Technologies ◽  
Young Patients ◽  
Spatial Relationship ◽  
3D Models ◽  
Immersive Virtual Reality ◽  
Global Improvement ◽  
3D Rendering ◽  
Before And After

Abstract Tridimensional (3D) rendering of volumetric neuroimaging is increasingly been used to assist surgical management of brain tumors. New technologies allowing immersive virtual reality (VR) visualization of obtained models offer the opportunity to appreciate neuroanatomical details and spatial relationship between the tumor and normal neuroanatomical structures to a level never seen before. We present our preliminary experience with the Surgical Theatre, a commercially available 3D VR system, in 60 consecutive neurosurgical oncology cases. 3D models were developed from volumetric CT scans and MR standard and advanced sequences. The system allows the loading of 6 different layers at the same time, with the possibility to modulate opacity and threshold in real time. Use of the 3D VR was used during preoperative planning allowing a better definition of surgical strategy. A tailored craniotomy and brain dissection can be simulated in advanced and precisely performed in the OR, connecting the system to intraoperative neuronavigation. Smaller blood vessels are generally not included in the 3D rendering, however, real-time intraoperative threshold modulation of the 3D model assisted in their identification improving surgical confidence and safety during the procedure. VR was also used offline, both before and after surgery, in the setting of case discussion within the neurosurgical team and during MDT discussion. Finally, 3D VR was used during informed consent, improving communication with families and young patients. 3D VR allows to tailor surgical strategies to the single patient, contributing to procedural safety and efficacy and to the global improvement of neurosurgical oncology care.

Reducing Culture Reporting Errors in the Microbiology Laboratory

2019 ◽  
Vol 152 (Supplement_1) ◽  
pp. S131-S132
Author(s):  
Kathryn Hogan ◽  
Beena Umar ◽  
Mohamed Alhamar ◽  
Kathleen Callahan ◽  
Linoj Samuel
Keyword(s):  
Real Time ◽  
Error Rate ◽  
Reporting System ◽  
Error Rates ◽  
Tracking Errors ◽  
Corrective Measures ◽  
Safety Awareness ◽  
Before And After ◽  
Set Up ◽  
System Errors

Abstract Objectives There are few papers that characterize types of errors in microbiology laboratories and scant research demonstrating the effects of interventions on microbiology lab errors. This study aims to categorize types of culture reporting errors found in microbiology labs and to document the error rates before and after interventions designed to reduce errors and improve overall laboratory quality. Methods To improve documentation of error incidence, a self-reporting system was changed to an automatic reporting system. Errors were categorized into five types Gram stain (misinterpretations), identification (incorrect analysis), set up labeling (incorrect patient labels), procedures (not followed), and miscellaneous. Error rates were tracked according to technologist, and technologists were given real-time feedback by a manager. Error rates were also monitored in the daily quality meeting and frequently detected errors were discussed at staff meetings. Technologists attended a year-end review with a manager to improve their performance. To maintain these changes, policies were developed to monitor technologist error rate and to define corrective measures. If a certain number of errors per month was reached, technologists were required to undergo retraining by a manager. If a technologist failed to correct any error according to protocol, they were also potentially subject to corrective measures. Results In 2013, we recorded 0.5 errors per 1,000 tests. By 2018, we recorded only 0.1 errors per 1,000 tests, an 80% decrease. The yearly culture volume from 2013 to 2018 increased by 32%, while the yearly error rate went from 0.05% per year to 0.01% per year, a statistically significant decrease (P = .0007). Conclusion This study supports the effectiveness of the changes implemented to decrease errors in culture reporting. By tracking errors in real time and using a standardized process that involved timely follow-up, technologists were educated on error prevention. This practice increased safety awareness in our micro lab.

Electrostatic Sensor for Real–Time Mass Flow Rate Measurement of Particle Conveying in Pneumatic Pipeline

2012 ◽  
Author(s):  
Mohd. Fua’ad Rahmat ◽  
Wee Lee Yaw
Keyword(s):  
Real Time ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Cross Correlation ◽  
High Accuracy ◽  
Industrial Processes ◽  
Rate Measurement ◽  
Flow Rate Measurement ◽  
Controlled Flow

This paper discussed the electrostatic sensors that have been constructed for real–time mass flow rate measurement of particle conveying in a Pneumatic pipeline. Many industrial processes require continuous, smooth, and consistent delivery of solids materials with a high accuracy of controlled flow rate. This requirement can only be achieved by installing a proper measurement system. Electrostatic sensor offers the most inexpensive and simplest means of measuring solids flows in pipes. Key words: Electrostatic sensor, cross-correlation, peripheral velocity

Sign in / Sign up

Export Citation Format

Share Document