The effect of the atomic incident angle upon the microstructure of thick beryllium deposits produced by physical vapor deposition

1982 ◽  
Vol 21 (4) ◽  
pp. 980-985 ◽  
Author(s):  
T. G. Nieh ◽  
R. F. Karlak ◽  
A. E. Vidoz
Keyword(s):  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Incident Angle

Kinetic Monte Carlo Study of Void Distribution in Nickel Thin Film by Physical Vapor Deposition

2007 ◽  
Vol 121-123 ◽  
pp. 1153-1156
Author(s):  
Xiao Dong He ◽  
Ying Chun Shan ◽  
Ming Wei Li
Keyword(s):  
Thin Film ◽  
Monte Carlo ◽  
Substrate Temperature ◽  
Deposition Rate ◽  
Vapor Deposition ◽  
Critical Incident ◽  
Physical Vapor Deposition ◽  
Kinetic Monte Carlo ◽  
Incident Angle ◽  
Void Distribution

2D kinetic Monte Carlo simulation has been used to study the void distribution of nickel thin film prepared by physical vapor deposition, and embedded atom method (EAM) was used to represent the interatomic interaction. Packing density and surface roughness were studied as the functions of deposition rate, substrate temperature and incident angle. The results reveal the existence of critical substrate temperature and critical incident angle, and higher substrate temperature, lower deposition rate and appropriate incident angle are advantaged to prepare the compact thin film with excellent mechanical properties.

TEM characterization of WSix films

1994 ◽  
Vol 52 ◽  
pp. 848-849
Author(s):  
V. C. Kannan ◽  
S. M. Merchant ◽  
R. B. Irwin ◽  
A. K. Nanda ◽  
M. Sundahl ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Vapor Deposition ◽  
High Purity ◽  
Physical Vapor Deposition ◽  
Thermal Treatments ◽  
Rapid Thermal Anneal ◽  
Tungsten Silicide ◽  
Tem Characterization ◽  
Metal Silicides

Metal silicides such as WSi2, MoSi2, TiSi2, TaSi2 and CoSi2 have received wide attention in recent years for semiconductor applications in integrated circuits. In this study, we describe the microstructures of WSix films deposited on SiO2 (oxide) and polysilicon (poly) surfaces on Si wafers afterdeposition and rapid thermal anneal (RTA) at several temperatures. The stoichiometry of WSix films was confirmed by Rutherford Backscattering Spectroscopy (RBS). A correlation between the observed microstructure and measured sheet resistance of the films was also obtained.WSix films were deposited by physical vapor deposition (PVD) using magnetron sputteringin a Varian 3180. A high purity tungsten silicide target with a Si:W ratio of 2.85 was used. Films deposited on oxide or poly substrates gave rise to a Si:W ratio of 2.65 as observed by RBS. To simulatethe thermal treatments of subsequent processing procedures, wafers with tungsten silicide films were subjected to RTA (AG Associates Heatpulse 4108) in a N2 ambient for 60 seconds at temperatures ranging from 700° to 1000°C.

scholarly journals Noble Metals for Modern Implant Materials: MOCVD of Film Structures and Cytotoxical, Antibacterial, and Histological Studies

Biomedicines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 851
Author(s):  
Svetlana I. Dorovskikh ◽  
Evgeniia S. Vikulova ◽  
Elena V. Chepeleva ◽  
Maria B. Vasilieva ◽  
Dmitriy A. Nasimov ◽  
...  
Keyword(s):  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Noble Metals ◽  
Mononuclear Cells ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Ti Alloy ◽  
Peripheral Blood Mononuclear ◽  
Histological Studies

This work is aimed at developing the modification of the surface of medical implants with film materials based on noble metals in order to improve their biological characteristics. Gas-phase transportation methods were proposed to obtain such materials. To determine the effect of the material of the bottom layer of heterometallic structures, Ir, Pt, and PtIr coatings with a thickness of 1.4–1.5 μm were deposited by metal–organic chemical vapor deposition (MOCVD) on Ti6Al4V alloy discs. Two types of antibacterial components, namely, gold nanoparticles (AuNPs) and discontinuous Ag coatings, were deposited on the surface of these coatings. AuNPs (11–14 nm) were deposited by a pulsed MOCVD method, while Ag films (35–40 nm in thickness) were obtained by physical vapor deposition (PVD). The cytotoxic (24 h and 48 h, toward peripheral blood mononuclear cells (PBMCs)) and antibacterial (24 h) properties of monophase (Ag, Ir, Pt, and PtIr) and heterophase (Ag/Pt, Ag/Ir, Ag/PtIr, Au/Pt, Au/Ir, and Au/PtIr) film materials deposited on Ti-alloy samples were studied in vitro and compared with those of uncoated Ti-alloy samples. Studies of the cytokine production by PBMCs in response to incubation of the samples for 24 and 48 h and histological studies at 1 and 3 months after subcutaneous implantation in rats were also performed. Despite the comparable thickness of the fibrous capsule after 3 months, a faster completion of the active phase of encapsulation was observed for the coated implants compared to the Ti alloy analogs. For the Ag-containing samples, growth inhibition of S. epidermidis, S. aureus, Str. pyogenes, P. aeruginosa, and Ent. faecium was observed.

Synthesis of lead oxide thin films by using physical vapor deposition technique

2021 ◽  
Vol 42 ◽  
pp. 2752-2755
Author(s):  
Ahmed F. Abdulrahman ◽  
Raghad Y. Mohammed ◽  
Sabah M. Ahmed ◽  
Samir M. Hamad
Keyword(s):  
Thin Films ◽  
Vapor Deposition ◽  
Lead Oxide ◽  
Physical Vapor Deposition ◽  
Deposition Technique ◽  
Oxide Thin Films ◽  
Vapor Deposition Technique ◽  
Physical Vapor Deposition Technique

scholarly journals Characterization of Thin Chromium Coatings Produced by PVD Sputtering for Optical Applications

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 215
Author(s):  
Andreia A. Ferreira ◽  
Francisco J. G. Silva ◽  
Arnaldo G. Pinto ◽  
Vitor F. C. Sousa
Keyword(s):  
Automotive Industry ◽  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Early Stage ◽  
Chemical Vapor ◽  
Experimental Tests ◽  
Scratch Test ◽  
Industrial Sectors ◽  
Deposition Processes ◽  
Optical Applications

PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significance in the last two decades with the mandatory shift from electrodeposition processes to clean deposition processes due to environmental, public safety, and health concerns. Due to the frequent use of coatings in several industrial sectors, the importance of studying the chromium coating processes through PVD–sputtering can be realized, investing in a real alternative to electroplated hexavalent chromium, usually denominated by chromium 6, regularly applied in electrodeposition processes of optical products in the automotive industry. At an early stage, experimental tests were carried out to understand which parameters are most suitable for obtaining chromium coatings with optical properties. To study the coating in a broad way, thickness and roughness analysis of the coatings obtained using SEM and AFM, adhesion analyzes with the scratch-test and transmittance by spectrophotometry were carried out. It was possible to determine that the roughness and transmittance decreased with the increase in the number of layers, the thickness of the coating increased linearly, and the adhesion and resistance to climatic tests remained positive throughout the study. Thus, this study allows for the understanding that thin multilayered Cr coatings can be applied successfully to polymeric substrates regarding optical applications in the automotive industry.

Sign in / Sign up

Export Citation Format

Share Document