Super multi-view three-dimensional display with small light intensity ripple and high spatial resolution

2017 ◽  
Author(s):  
Li Liu ◽  
Xinzhu Sang ◽  
Xunbo Yu ◽  
Binbin Yan ◽  
Boyang Liu ◽  
...  
Keyword(s):  
Light Intensity ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Three Dimensional ◽  
Three Dimensional Display

scholarly journals The developement of red mud flood environmental information system and the methodology for the spatial analysis of the degraded area

2015 ◽  
Vol 9 (1) ◽  
pp. 1-11
Author(s):  
Gábor Bakó ◽  
Gábor Kovács ◽  
Zsolt Molnár ◽  
Judit Kirisics ◽  
Eszter Góber ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Spatial Resolution ◽  
Red Mud ◽  
High Spatial Resolution ◽  
Three Dimensional ◽  
Environmental Information ◽  
Evaluation Methodology ◽  
Aerial Photogrammetry ◽  
Impact Area ◽  
The Impact

The red mud disaster occurred on 4th October 2010 in Hungary has raised the necessity of rapid intervention and drew attention to the long-term monitoring of such threat. Both the condition assessment and the change monitoring indispensably required the prompt and detailed spatial survey of the impact area. It was conducted by several research groups - independently - with different recent surveying methods. The high spatial resolution multispectral aerial photogrammetry is the spatially detailed (high resolution) and accurate type of remote sensing. The hyperspectral remote sensing provides more information about material quality of pollutants, with less spatial details and lower spatial accuracy, while LIDAR ensures the three-dimensional shape and terrain models. The article focuses on the high spatial resolution, multispectral electrooptical method and the evaluation methodology of the deriving high spatial resolution ortho image map, presenting the derived environmental information database

scholarly journals Bathymetry Time Series Using High Spatial Resolution Satellite Images

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 531 ◽  
Author(s):  
Manuel Erena ◽  
José A. Domínguez ◽  
Joaquín F. Atenza ◽  
Sandra García-Galiano ◽  
Juan Soria ◽  
...  
Keyword(s):  
High Precision ◽  
Spatial Resolution ◽  
Satellite Images ◽  
Environmental Variability ◽  
High Spatial Resolution ◽  
Numerical Models ◽  
Three Dimensional ◽  
Satellite System ◽  
Precision Data ◽  
Mar Menor

The use of the new generation of remote sensors, such as echo sounders and Global Navigation Satellite System (GNSS) receivers with differential correction installed in a drone, allows the acquisition of high-precision data in areas of shallow water, as in the case of the channel of the Encañizadas in the Mar Menor lagoon. This high precision information is the first step to develop the methodology to monitor the bathymetry of the Mar Menor channels. The use of high spatial resolution satellite images is the solution for monitoring many hydrological changes and it is the basis of the three-dimensional (3D) numerical models used to study transport over time, environmental variability, and water ecosystem complexity.

Chemical Nano-tomography of Self-assembled Ge-Si:Si(001) Islands from Quantitative High Resolution Transmission Electron Microscopy

2009 ◽  
Vol 1184 ◽  
Author(s):  
Luciano Andrey Montoro ◽  
Marina Leite ◽  
Daniel Biggemann ◽  
Fellipe Grillo Peternella ◽  
Kees Joost Batenburg ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Three Dimensional ◽  
Precise Knowledge ◽  
Transmission Electron ◽  
Self Consistent ◽  
Chemical Distribution

AbstractThe knowledge of composition and strain with high spatial resolution is highly important for the understanding of the chemical and electronic properties of alloyed nanostructures. Several applications require a precise knowledge of both composition and strain, which can only be extracted by self-consistent methodologies. Here, we demonstrate the use of a quantitative high resolution transmission electron microscopy (QHRTEM) technique to obtain two-dimensional (2D) projected chemical maps of epitaxially grown Ge-Si:Si(001) islands, with high spatial resolution, at different crystallographic orientations. By a combination of these data with an iterative simulation, it was possible infer the three-dimensional (3D) chemical arrangement on the strained Ge-Si:Si(001) islands, showing a four-fold chemical distribution which follows the nanocrystal shape/symmetry. This methodology can be applied for a large variety of strained crystalline systems, such as nanowires, epitaxial islands, quantum dots and wells, and partially relaxed heterostructures.

scholarly journals 757 Cardio-TC role in patients selection for transcatheter edge to edge tricuspid repair

2021 ◽  
Vol 23 (Supplement_G) ◽  
Author(s):  
Edoardo Nobile ◽  
Valeria Cammalleri ◽  
Domenico De Stefano ◽  
Luka Vitez ◽  
Aurelio De Filippis ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Tricuspid Valve ◽  
High Spatial Resolution ◽  
Three Dimensional ◽  
Vena Cava ◽  
Endocardial Border ◽  
Centroid Distance ◽  
Study Population ◽  
Regurgitant Orifice Area ◽  
The Right

Abstract Aims Anatomic knowledge of the tricuspid valve (TV) is the first step in the management of patients with tricuspid regurgitation (TR) who are candidates for transcatheter tricuspid valve intervention (TTVI). Echocardiography is undoubtedly the first approach in assessing the aetiology and severity of TR and the size and function of the right chambers. Computed tomography (CT) provides a detailed morphological visualization of the cardiac structures owing to acquisition of 3D data with high spatial resolution. These findings may undoubtedly help in decision-making progress for novel transcatheter therapies. The purpose of the present study was to assess the geometrical changes of the TV complex using CT images, in patients suffering from functional TR and lead-induced TR. Methods The study population consisted of 21 consecutive patients with symptomatic severe TR referred to Policlinico Universitario Campus Biomedico between November 2020 and October 2021. Patients were prospectively included in the study only if they presented severe TR, diagnosed by echocardiography and underwent cardiac CT study dedicated to the right-chambers. The reconstructions were transferred to an external workstation for off-line image analysis. The following measurements were reported: tricuspid annulus area, perimeter, septal–lateral and antero-posterior diameters. Commissures were identified as antero-septal (AS), postero-septal (PS) and anteroposterior (AP). Were measured the inferior vena cava ostium to tricuspid valve centroid distance, anatomic regurgitant orifice area (AROA) and its position respect to the centroid, and the right chambers. Results All 21 patients underwent CT scan using Siemens SOMATOM Definition AS 128 Slice CT Machine. The measurements were calculated off-line using the 3mensio workstation. In our study population, the annulus resulted enlarged in the annulus area, perimeter, septal-lateral and anterior-posterior dimensions. Measurements did not differ significantly, except for the septal-lateral diameter that was smaller in systole (52.80 ± 7.28 mm vs. 47.83 ± 6.83 mm (P=0.027). Also, distances between the commissures were similar except for the AP-AS distance that was shorter in systole (45.26 ± 3.48 mm vs. 42.13 ± 3.73, P=0.007). The AROA resulted to be central in 7 patients, the IVC ostium to TV centroid distance was 23±3 mm. Right chambers and IVC resulted very enlarged in all patients. Conclusions CT provides a complete morphologic imaging of the heart structures, thanks to a high spatial resolution with excellent capacity to define the endocardial border and allows acquisition of three-dimensional data with high spatial resolution of the TV and provides valuable information about the geometric variations of the tricuspid complex in patients with TR. Image quality for analysis should be optimized with specific CT acquisition protocols that focus on the right ventricles.

scholarly journals High-spatial-resolution Three-dimensional CT Angiography for Acute Surgery of Cerebral Aneurysms

2013 ◽  
Vol 41 (2) ◽  
pp. 130-136
Author(s):  
Yoshitsugu OIWA ◽  
Hirotaka OKUMURA ◽  
Yoko HIROHATA ◽  
Ryohei TANAKA ◽  
Hiroo YAMAGA ◽  
...  
Keyword(s):  
Ct Angiography ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Three Dimensional ◽  
Cerebral Aneurysms ◽  
Acute Surgery

scholarly journals Embedded Micro-detectors for EUV Exposure Control in FinFET CMOS Technology

2022 ◽  
Vol 17 (1) ◽  
Author(s):  
Chien-Ping Wang ◽  
Burn Jeng Lin ◽  
Pin-Jiun Wu ◽  
Jiaw-Ren Shih ◽  
Yue-Der Chih ◽  
...  
Keyword(s):  
Light Intensity ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Cmos Technology ◽  
Exposure Control ◽  
Storage Node ◽  
Cmos Compatibility ◽  
Time And Energy ◽  
Non Destructive

AbstractAn on-wafer micro-detector for in situ EUV (wavelength of 13.5 nm) detection featuring FinFET CMOS compatibility, 1 T pixel and battery-less sensing is demonstrated. Moreover, the detection results can be written in the in-pixel storage node for days, enabling off-line and non-destructive reading. The high spatial resolution micro-detectors can be used to extract the actual parameters of the incident EUV on wafers, including light intensity, exposure time and energy, key to optimization of lithographic processes in 5 nm FinFET technology and beyond.

Research on the method of three-dimensional surface displacements of Tianjin area based on combined multi-source measurements

2020 ◽  
Vol 14 (1) ◽  
pp. 83-94
Author(s):  
Nannan Guo ◽  
Wei Zhan
Keyword(s):  
Velocity Field ◽  
Spatial Resolution ◽  
Displacement Field ◽  
High Spatial Resolution ◽  
Weighted Least Squares ◽  
Three Dimensional ◽  
Large Displacement ◽  
Gps Measurements ◽  
Large Spatial Scale ◽  
Surface Time

AbstractCombining multi-source measurements can improve the accuracy and the spatial resolution of the three-dimensional (3-D) displacements field. Few researches have been conducted to integrate InSAR, GPS and leveling data of Tianjin in the recent three years to get the 3-D large displacement velocity field. How to effectively combine multi-source measurements and obtain the accurate 3-D large displacement field in high spatial resolution is worth studying. In this paper, the optimal method for acquiring 3-D displacement field by combining InSAR, leveling and GPS measurements is obtained by comparing the different methods. Then we realize the combining InSAR, leveling and GPS measurements to obtain the high-precision 3-D displacement field in Tianjin (China) from 2016 to 2018. Compared with different methods, we integrate InSAR, GPS and leveling measurements and use the weighted least squares method to estimate the 3-D displacement field with the highest accuracy. Although the accuracy of the horizontal displacement field obtained by this method has not been greatly improved, the vertical accuracy is obviously better than the other methods. The introduction of leveling measurements is beneficial to improve the accuracy of the vertical displacement field. Compared with independent GPS measurements, the standard deviations of 3-D displacements velocity field estimated by optimal solution method is 2.6 mm/yr, 2.1 mm/yr and 2.7 mm/yr in the vertical, eastern and northern directions, respectively. These results indicate that this method effectively utilizes the advantages of GPS, InSAR and leveling measurements, and extends the limitations of a single technical in describing surface-time scale applications. And the 3-D displacements information with a large spatial scale and high spatial resolution provides a reliable data basis for studying the crustal movement and its dynamic mechanism in China.

Sign in / Sign up

Export Citation Format

Share Document