Investigating the effects of compressional and elastic photoacoustic waves to predict transcranial photoacoustic image quality for guidance of minimally invasive neurosurgeries

2021 ◽  
Author(s):  
Michelle Graham ◽  
Reese Dunne ◽  
Muyinatu Bell
Keyword(s):  
Image Quality ◽  
Minimally Invasive

Current Image-Guided Interventions in Pediatric Surgery

2020 ◽  
Vol 30 (02) ◽  
pp. 164-171
Author(s):  
Nathan S. Rubalcava ◽  
Marcus D. Jarboe
Keyword(s):  
Image Quality ◽  
Surgical Technique ◽  
Minimally Invasive ◽  
Pediatric Surgery ◽  
Image Guidance ◽  
Surgical Intervention ◽  
Surgical Approaches ◽  
Current Image ◽  
Image Guided ◽  
Invasive Management

AbstractTraditionally, surgical technique has not included imaging modalities. Image guidance had largely been left to radiology specialties. However, in recent years, tremendous advances in imaging have taken place with improvements in image quality, portability, and accessibility. With these advances, surgeons have begun to realize the benefits of fusing image guidance with traditional surgical approaches. Subsequently, many novel surgical approaches utilizing image guidance have been developed that allow for precise, safe, and minimally invasive management of conditions that previously required open surgical intervention.

Progress In The Practical Application Of Automated Image Analysis To Tem Negatives

1977 ◽  
Vol 35 ◽  
pp. 214-217
Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly
Keyword(s):  
Image Analysis ◽  
Image Quality ◽  
Exposure Time ◽  
Image Contrast ◽  
Automated Image Analysis ◽  
Practical Application ◽  
Factors Affecting ◽  
High Image Quality ◽  
Qualitative Evidence ◽  
Comprehensive Study

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.

Observability of Very Thick Specimen by Using Transmission Scanning Electron Microscope

1971 ◽  
Vol 29 ◽  
pp. 26-27
Author(s):  
K. Shibatomi ◽  
T. Yamanoto ◽  
H. Koike
Keyword(s):  
Electron Microscope ◽  
Image Quality ◽  
Scanning Electron Microscope ◽  
Chromatic Aberration ◽  
Image Contrast ◽  
Objective Lens ◽  
Thick Specimen ◽  
Transmission Electron ◽  
Scanning Electron

In the observation of a thick specimen by means of a transmission electron microscope, the intensity of electrons passing through the objective lens aperture is greatly reduced. So that the image is almost invisible. In addition to this fact, it have been reported that a chromatic aberration causes the deterioration of the image contrast rather than that of the resolution. The scanning electron microscope is, however, capable of electrically amplifying the signal of the decreasing intensity, and also free from a chromatic aberration so that the deterioration of the image contrast due to the aberration can be prevented. The electrical improvement of the image quality can be carried out by using the fascionating features of the SEM, that is, the amplification of a weak in-put signal forming the image and the descriminating action of the heigh level signal of the background. This paper reports some of the experimental results about the thickness dependence of the observability and quality of the image in the case of the transmission SEM.

An Environmental Wet Cell For High Voltage Electron Microscopy

1973 ◽  
Vol 31 ◽  
pp. 18-19
Author(s):  
N.J. Tighe ◽  
H.M. Flower ◽  
P.R. Swann
Keyword(s):  
Electron Microscopy ◽  
High Temperature ◽  
Image Quality ◽  
Inelastic Scattering ◽  
High Voltage ◽  
High Voltage Electron Microscopy ◽  
Voltage Electron ◽  
Environmental Cell ◽  
Water Saturated ◽  
High Temperature Gas

A differentially pumped environmental cell has been developed for use in the AEI EM7 million volt microscope. In the initial version the column of gas traversed by the beam was 5.5mm. This permited inclusion of a tilting hot stage in the cell for investigating high temperature gas-specimen reactions. In order to examine specimens in the wet state it was found that a pressure of approximately 400 torr of water saturated helium was needed around the specimen to prevent dehydration. Inelastic scattering by the water resulted in a sharp loss of image quality. Therefore a modified cell with an ‘airgap’ of only 1.5mm has been constructed. The shorter electron path through the gas permits examination of specimens at the necessary pressure of moist helium; the specimen can still be tilted about the side entry rod axis by ±7°C to obtain stereopairs.

Image quality vs data obtainment in biological electron microscopy

1986 ◽  
Vol 44 ◽  
pp. 42-43
Author(s):  
J. E. Johnson
Keyword(s):  
Electron Microscopy ◽  
Endoplasmic Reticulum ◽  
Electron Beam ◽  
Image Quality ◽  
High Speed ◽  
Early Period ◽  
Early Years ◽  
Fluorescent Screen ◽  
Embedding Medium

In the early years of biological electron microscopy, scientists had their hands full attempting to describe the cellular microcosm that was suddenly before them on the fluorescent screen. Mitochondria, Golgi, endoplasmic reticulum, and other myriad organelles were being examined, micrographed, and documented in the literature. A major problem of that early period was the development of methods to cut sections thin enough to study under the electron beam. A microtome designed in 1943 moved the specimen toward a rotary “Cyclone” knife revolving at 12,500 RPM, or 1000 times as fast as an ordinary microtome. It was claimed that no embedding medium was necessary or that soft embedding media could be used. Collecting the sections thus cut sounded a little precarious: “The 0.1 micron sections cut with the high speed knife fly out at a tangent and are dispersed in the air. They may be collected... on... screens held near the knife“.

The influence of confocal microscope design on imaging performance

1993 ◽  
Vol 51 ◽  
pp. 144-145
Author(s):  
C J R Sheppard
Keyword(s):  
Image Quality ◽  
Fluorescence Imaging ◽  
Confocal Microscope ◽  
Industrial Applications ◽  
Three Dimensions ◽  
Design Parameters ◽  
Weak Signals ◽  
Size And Shape ◽  
Imaging Performance ◽  
Fundamental Limitation

The confocal microscope is now widely used in both biomedical and industrial applications for imaging, in three dimensions, objects with appreciable depth. There are now a range of different microscopes on the market, which have adopted a variety of different designs. The aim of this paper is to explore the effects on imaging performance of design parameters including the method of scanning, the type of detector, and the size and shape of the confocal aperture.It is becoming apparent that there is no such thing as an ideal confocal microscope: all systems have limitations and the best compromise depends on what the microscope is used for and how it is used. The most important compromise at present is between image quality and speed of scanning, which is particularly apparent when imaging with very weak signals. If great speed is not of importance, then the fundamental limitation for fluorescence imaging is the detection of sufficient numbers of photons before the fluorochrome bleaches.

Considerations in Dysphagia Management Following Esophagectomy

2016 ◽  
Vol 1 (13) ◽  
pp. 169-176
Author(s):  
Lisa M. Evangelista ◽  
James L. Coyle
Keyword(s):  
Esophageal Cancer ◽  
Minimally Invasive ◽  
Minimally Invasive Surgical Procedures ◽  
Esophageal Resection ◽  
Minimally Invasive Surgical ◽  
Operative Complications ◽  
Swallowing Difficulties ◽  
Epidemiological Impact ◽  
Invasive Techniques ◽  
Management Of Dysphagia

Esophageal cancer is the sixth leading cause of death from cancer worldwide. Esophageal resection is the mainstay treatment for cancers of the esophagus. While curative, surgical resection may result in swallowing difficulties that require intervention from speech-language pathologists (SLPs). Minimally invasive surgical procedures for esophageal resection have aimed to reduce morbidity and mortality associated with more invasive techniques. Both intra-operative and post-operative complications, regardless of the surgical approach, can result in dysphagia. This article will review the epidemiological impact of esophageal cancers, operative complications resulting in dysphagia, and clinical assessment and management of dysphagia pertinent to esophageal resection.

Sign in / Sign up

Export Citation Format

Share Document