Determination of the stress dependence of the velocity of Lamb waves in aluminum plates

Author(s):  
U. Amjad ◽  
D. Jha ◽  
K. S. Tarar ◽  
H. Klinghammer ◽  
W. Grill
Author(s):  
Kamran Ashraf ◽  
Syed Adnan Ali Shah ◽  
Mohd Mujeeb

<p><strong>Objective: </strong>A simple, sensitive, precise, and accurate stability indicating HPTLC (high-performance thin-layer chromatography) method for analysis of 10-gingerol in ginger has been developed and validated as perICH guidelines.</p><p><strong>Methods: </strong>The separation was achieved on TLC (thin layer chromatography) aluminum plates pre-coated with silica gel 60F<sub>254</sub> using n-hexane: ethyl acetate 55:45 (%, v/v) as a mobile phase. Densitometric analysis was performed at 569 nm.</p><p><strong>Results: </strong>This system was found to have a compact spot of 10-gingerol at <em>R</em><sub>F</sub> value of 0.57±0.03. For the proposed procedure, linearity (<em>r</em><sup>2</sup> = 0.998±0.02), limit of detection (18ng/spot), limit of quantification (42 ng/spot), recovery (ranging from 98.35%–100.68%), were found to be satisfactory.</p><p><strong>Conclusion: </strong>Statistical analysis reveals that the content of 10-gingerol in different geographical region varied significantly. The highest and lowest concentration of 10-gingerol in ginger was found to be present in a sample of Patna, Lucknow and Surat respectively which inferred that the variety of ginger found in Patna, Lucknow are much superior to other regions of India.</p>


1988 ◽  
Vol 21 (5) ◽  
pp. 133-136
Author(s):  
N Zarsav

The use of high frequency ultrasonic Lamb waves to measure the thickness of thin plates and foils, is discussed and the feasibility of their application to the determination of the degree of cure of polymer coating on coated tin plated steel sheet (as used by the food can industry) is evaluated. The paper also discusses briefly the design features of the purpose built precision double probe ultrasonic goniometer used to carry out these measurements.


INDIAN DRUGS ◽  
2012 ◽  
Vol 49 (12) ◽  
pp. 51-55
Author(s):  
S Kathirvel ◽  
◽  
K. Madhu Babu

Described in this manuscript is the first reported new, simple high performance thin layer chromatographic method for the determination of tapentadol hydrochloride in bulk and its tablet dosage form. The drug was separated on aluminum plates precoated with silica gel 60 F254 with butanol: water: glacial acetic acid in the ratio of 6:2:2 (v/v/v) as mobile phase. Quantitative analysis was performed by densitometric scanning at 254 nm. The method was validated for linearity, accuracy, precision and robustness. The calibration plot was linear over the range of 200-600 ng band -1 for tapentadol hydrochloride. The method was successfully applied to the analysis of drug in a pharmaceutical dosage form.


Author(s):  
Salem H ◽  
◽  
Omar MA ◽  
Derayea SM ◽  
Khalil AA ◽  
...  

A comparative study for the validation and advancement of two analytical approaches applied for the simultaneous determination of Mometasone Furoate (MF), Miconazole Nitrate (MIC) and Gentamicin (GM) formulated in Momenta® cream. The first approach was TLC-spectrodensitometric method, which was advanced by separating the three components on TLC aluminum plates coated with silica gel 60 F254 using chloroform: methanol: formic acid (4:0.3:0.15, v/v/v) as a mobile phase, then scanned at 254nm using Camage TLC scanner 3 operated in reflectance-absorbance mode. The second approach was the chemometric method using two models: Partial Least Squares (PLS) and Principle Component Regression Model (PCR). The proposed approaches were validated according to ICH guidelines and were applied for the determination of the ternary mixtures in their analytical mixtures and pharmaceutical preparation.


Sign in / Sign up

Export Citation Format

Share Document