scholarly journals Optothermotronic effect as an ultrasensitive thermal sensing technology for solid-state electronics

2020 ◽  
Vol 6 (22) ◽  
pp. eaay2671 ◽  
Author(s):  
T. Dinh ◽  
T. Nguyen ◽  
A. R. M. Foisal ◽  
H.-P. Phan ◽  
T.-K. Nguyen ◽  
...  

The thermal excitation, regulation, and detection of charge carriers in solid-state electronics have attracted great attention toward high-performance sensing applications but still face major challenges. Manipulating thermal excitation and transport of charge carriers in nanoheterostructures, we report a giant temperature sensing effect in semiconductor nanofilms via optoelectronic coupling, termed optothermotronics. A gradient of charge carriers in the nanofilms under nonuniform light illumination is coupled with an electric tuning current to enhance the performance of the thermal sensing effect. As a proof of concept, we used silicon carbide (SiC) nanofilms that form nanoheterostructures on silicon (Si). The sensing performance based on the thermal excitation of charge carriers in SiC is enhanced by at least 100 times through photon excitation, with a giant temperature coefficient of resistance (TCR) of up to −50%/K. Our findings could be used to substantially enhance the thermal sensing performance of solid-state electronics beyond the present sensing technologies.

2017 ◽  
Vol 2 (5) ◽  
pp. 1600264 ◽  
Author(s):  
Abdurrahman Gumus ◽  
Arsalan Alam ◽  
Aftab M. Hussain ◽  
Kush Mishra ◽  
Irmandy Wicaksono ◽  
...  

1998 ◽  
Vol 4 (S2) ◽  
pp. 198-199
Author(s):  
S. Barkan ◽  
K. F. Ihrig ◽  
M. B. Abott

High performance Si(Li) detectors for EDS applications must be cooled in order to eliminate excess leakage current and to reduce noise as a result of thermal excitation. The most common cooling method is the use of liquid nitrogen (LN), which has been commonly used during the last four decades. The LN method is relatively simple, however, it has some disadvantages such as: requiring a large dewar for storing the LN, the necessity of refilling it with LN, as well as some hazardous handling issues.Several years ago, Kevex introduced a new no-LN x-ray detector, the SuperDry, offering the customer a solution to the previously mentioned cooling problems. The SuperDry uses a thermoelectric device, a Peltier solid-state refrigerator, without any moving parts. The SuperDry covers all the disadvantages of the LN method, however, the temperature achieved has not reached the same low level as the LN products.


2019 ◽  
Vol 48 (32) ◽  
pp. 12080-12087 ◽  
Author(s):  
Germán E. Gomez ◽  
Carlos A. López ◽  
R. Lee Ayscue ◽  
Karah E. Knope ◽  
María del R. Torres Deluigi ◽  
...  

Two new nanosized lanthanide-doped materials (Sm and Eu) obtained by high-energy milling provided a suitable platform with solid-state photoluminescence properties for sensing applications.


2003 ◽  
Vol 771 ◽  
Author(s):  
Michael C. Hamilton ◽  
Sandrine Martin ◽  
Jerzy Kanicki

AbstractWe have investigated the effects of white-light illumination on the electrical performance of organic polymer thin-film transistors (OP-TFTs). The OFF-state drain current is significantly increased, while the drain current in the strong accumulation regime is relatively unaffected. At the same time, the threshold voltage is decreased and the subthreshold slope is increased, while the field-effect mobility of the charge carriers is not affected. The observed effects are explained in terms of the photogeneration of free charge carriers in the channel region due to the absorbed photons.


Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 783 ◽  
Author(s):  
Andrea Gaiardo ◽  
David Novel ◽  
Elia Scattolo ◽  
Michele Crivellari ◽  
Antonino Picciotto ◽  
...  

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications.


2021 ◽  
pp. 2007864
Author(s):  
Woo Jin Hyun ◽  
Cory M. Thomas ◽  
Norman S. Luu ◽  
Mark C. Hersam

Small Methods ◽  
2021 ◽  
pp. 2100202
Author(s):  
Tiantian Dai ◽  
Zanhong Deng ◽  
Xiaodong Fang ◽  
Huadong Lu ◽  
Yong He ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document