Tapetum character states: analytical keys for tapetum types and activities

1997 ◽  
Vol 75 (9) ◽  
pp. 1448-1459 ◽  
Author(s):  
E. Pacini
Keyword(s):  
Pollen Development ◽  
Cell Walls ◽  
Pollen Grains ◽  
Cell Types ◽  
Plastid Differentiation ◽  
Pollen Coat ◽  
Tapetal Cells ◽  
Different Types ◽  
Compound Pollen ◽  
Pollen Formation

The different types of tapetum found in the spermatophyta are described, along with associated characters. The characters (taken singly, pairwise, or in multiple combinations) are (i) tapetum types; (ii) cell walls, tapetum types, and loculus; (iii) tapetal cells individually, tapetum types, and loculus; (iv) number of pollen grains enveloped by tapetal cells and type of pollen dispersing unit; (v) cell types and tapetum types; (vi) number of nuclei per cell and tapetum type; (vii) cycles of hyperactivity; (viii) exine formation; (ix) orbicles; (x) peritapetal membrane; (xi) plastid differentiation; (xii) stage of pollen development in which tapetal cells degenerate and type of pollen coat; (xiii) storage vacuoles; (xiv) sporophytic proteins; and (xv) devices of tapetal origin responsible for compound pollen formation and pollination. Examples are given and an analytical key of structural and functional diversity is provided as a helpful approach to the study of the tapetum. Key words: tapetum types, activities, pollen dispersing units.

Microstrobilate Morphology, Microsporogenesis, and Pollen Formation in Western Hemlock

1974 ◽  
Vol 4 (4) ◽  
pp. 509-517 ◽  
Author(s):  
Rong H. Ho ◽  
John N. Owens
Keyword(s):  
Low Temperatures ◽  
Pollen Development ◽  
Pollen Grains ◽  
Western Hemlock ◽  
Abaxial Surface ◽  
Chromosome Behavior ◽  
The Common ◽  
Pollen Formation ◽  
Prothallial Cell

In western hemlock (Tsugaheterophylla (Raf.) Sarg.), the number of microstrobili per shoot averages 4.2. Each microstrobilus averages 13.9 bud scales and 17.2 microsporophylls. Microsporangia have a transverse dehiscence layer on the abaxial surface. There are an average of 1476 pollen grains per microsporangium and 17.4 million pollen grains per gram.Meiosis begins in the fall but stops at pachytene in November; it resumes in the middle of February and is completed in 1 week. Three weeks after the completion of meiosis the first prothallial cell forms and two weeks later the pollen grains reach maturity. Pollen shedding occurs 1.5 months after the resumption of meiosis and lasts for 2 weeks. Chromosome behavior and pollen formation are normal in 98.4% of the cells and in 99.7% of the pollen grains. The common abnormalities encountered are chiasma bridges, precocious disjunction, lagging chromosomes, and undersized pollen grains. The abnormalities may be attributed to the low temperatures occurring during meiosis and pollen development.

scholarly journals A Novel R2R3-MYB Gene LoMYB33 From Lily Is Specifically Expressed in Anthers and Plays a Role in Pollen Development

2021 ◽  
Vol 12 ◽  
Author(s):  
Xinyue Liu ◽  
Ze Wu ◽  
Jingxian Feng ◽  
Guozhen Yuan ◽  
Ling He ◽  
...  
Keyword(s):  
Amino Acids ◽  
Transcriptional Activation ◽  
Pollen Development ◽  
Biotic Resistance ◽  
Pollen Grains ◽  
Anther Development ◽  
Transactivation Domain ◽  
Reading Frame ◽  
Pollen Formation ◽  
R2r3 Myb

Lily (Lilium spp.) is an important commercial flower crop, but its market popularity and applications are adversely affected by severe pollen pollution. Many studies have examined pollen development in model plants, but few studies have been conducted on flower crops such as lily. GAMYBs are a class of R2R3-MYB transcription factors and play important roles in plant development and biotic resistance; their functions vary in different pathways, and many of them are involved in anther development. However, their function and regulatory role in lily remain unclear. Here, the GAMYB homolog LoMYB33 was isolated and identified from lily. The open reading frame of LoMYB33 was 1620 bp and encoded a protein with 539 amino acids localized in the nucleus and cytoplasm. Protein sequence alignment showed that LoMYB33 contained a conserved R2R3 domain and three BOX motifs (BOX1, BOX2, and BOX3), which were unique to the GAMYB family. LoMYB33 had transcriptional activation activity, and its transactivation domain was located within 90 amino acids of the C-terminal. LoMYB33 was highly expressed during the late stages of anther development, especially in pollen. Analysis of the promoter activity of LoMYB33 in transgenic Arabidopsis revealed that the LoMYB33 promoter was highly activated in the pollen of stage 12 to 13 flowers. Overexpression of LoMYB33 in Arabidopsis significantly retarded growth; the excess accumulation of LoMYB33 also negatively affected normal anther development, which generated fewer pollen grains and resulted in partial male sterility in transgenic plants. Silencing of LoMYB33 in lily also greatly decreased the amount of pollen. Overall, our results suggested that LoMYB33 might play an important role in the anther development and pollen formation of lily.

scholarly journals Some cytological, ecological and evolutionary aspects of pollination

2014 ◽  
Vol 65 (1-2) ◽  
pp. 11-16 ◽  
Author(s):  
Ettore Pacini ◽  
Gian G. Franchi
Keyword(s):  
Pollen Grains ◽  
Pollen Exine ◽  
Cohesive Forces ◽  
Viscin Threads ◽  
Tapetal Cells ◽  
Different Types ◽  
Pollen Diameter ◽  
Evolutionary Aspects

Different types of pollen dispersing units are described. The pollen of angiosperms may be dispersed in monads, tetrads, polyads, massulae or compact pollinia. The monads and tetrads may form larger clumps of pollen with the aid of the following substances: a) pollenkitt, a product of <em>in situ</em> degeneration of the tapetum; b) tryphine, a product of tapetal extra situm degeneration, found only in <em>Cruciferae</em>; c) elastoviscin, a highly viscous product of the degeneration of a limited number of tapetal cells, found only in certain <em>Orchidaceae</em>; d) viscin threads or sporopollenin filaments arising from the pollen exine. The number of pollen grains composing the clumps depends on pollen diameter and the cohesive forces holding the pollen grains together. The various types of pollen dispersing unit are discussed in relation to the type of pollination and number of ovules per ovary.

Study of the Molecular Architecture of Keratin Filaments by Electron Microscopy

1982 ◽  
Vol 40 ◽  
pp. 118-119
Author(s):  
U. Aebi ◽  
P. Rew ◽  
T.-T. Sun
Keyword(s):  
Electron Microscopy ◽  
Structural Organization ◽  
Cell Types ◽  
Structural Features ◽  
Molecular Architecture ◽  
The Past ◽  
Keratin Filaments ◽  
Different Types ◽  
10 Nm Filaments ◽  
Different Cell Types

Various types of intermediate-sized (10-nm) filaments have been found and described in many different cell types during the past few years. Despite the differences in the chemical composition among the different types of filaments, they all yield common structural features: they are usually up to several microns long and have a diameter of 7 to 10 nm; there is evidence that they are made of several 2 to 3.5 nm wide protofilaments which are helically wound around each other; the secondary structure of the polypeptides constituting the filaments is rich in ∞-helix. However a detailed description of their structural organization is lacking to date.

Resolution of Channels in the Exine by Translocation of Colloidal Iron

1971 ◽  
Vol 29 ◽  
pp. 352-353
Author(s):  
John R. Rowley
Keyword(s):  
Phosphate Buffer ◽  
Pollen Development ◽  
Osmium Tetroxide ◽  
Pollen Grains ◽  
Deionized Water ◽  
Colloidal Iron ◽  
Fixed Material ◽  
Epilobium Angustifolium ◽  
Untreated Material ◽  
Microspore Mitosis

The morphology of the exine of many pollen grains, at the time of flowering, is such that one can suppose that transport of substances through the exine occurred during pollen development. Holes or channels, microscopic to submicroscopic, are described for a large number of grains. An inner part of the exine of Epilobium angustifolium L. and E. montanum L., which may be referred to as the endexine, has irregularly shaped channels early in pollen development although by microspore mitosis there is no indication of such channeling in chemically fixed material. The nucleus in microspores used in the experiment reported here was in prophase of microspore mitosis and the endexine, while lamellated in untreated grains, did not contain irregularly shaped channels. Untreated material from the same part of the inflorescence as iron treated stamens was examined following fixation with 0.1M glutaraldehyde in cacodylate-HCl buffer at pH 6.9 (315 milliosmoles) for 24 hrs, 4% formaldehyde in phosphate buffer at pH 7.2 (1,300 milliosmoles) for 12 hrs, 1% glutaraldehyde mixed with 0.1% osmium tetroxide for 20 min, osmium tetroxide in deionized water for 2 hrs and 1% glutaraldehyde mixed with 4% formaldehyde in 0.1M cacodylate-HCl buffer at pH 6.9 for two hrs.

Freeze-substitution of rye grass and ragweed pollen grains

1990 ◽  
Vol 48 (3) ◽  
pp. 686-687
Author(s):  
Liza B. Martinez ◽  
Susan M. Wick
Keyword(s):  
Cell Function ◽  
Pollen Grains ◽  
Freeze Substitution ◽  
Cell Types ◽  
Rapid Freezing ◽  
Rye Grass ◽  
Acrylic Resins ◽  
Allergenic Proteins ◽  
Cold Embedding ◽  
Structural Preservation

Rapid freezing and freeze-substitution have been employed as alternatives to chemical fixation because of the improved structural preservation obtained in various cell types. This has been attributed to biomolecular immobilization derived from the extremely rapid arrest of cell function. These methods allow the elimination of conventionally used fixatives, which may have denaturing or “masking” effects on proteins. Thus, this makes them ideal techniques for immunocytochemistry, in which preservation of both ultrastructure and antigenicity are important. These procedures are also compatible with cold embedding acrylic resins which are known to increase sensitivity in immunolabelling.This study reveals how rapid freezing and freeze-substitution may prove to be useful in the study of the mobile allergenic proteins of rye grass and ragweed. Most studies have relied on the use of osmium tetroxide to achieve the necessary ultrastructural detail in pollen whereas those that omitted it have had to contend with poor overall preservation.

scholarly journals Transcriptional and morphological profiling of parvalbumin interneuron subpopulations in the mouse hippocampus

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Lin Que ◽  
David Lukacsovich ◽  
Wenshu Luo ◽  
Csaba Földy
Keyword(s):  
Large Scale ◽  
Cell Types ◽  
Rna Seq ◽  
Neuronal Identity ◽  
Parvalbumin Interneurons ◽  
Different Types ◽  
Parvalbumin Interneuron ◽  
Cam Profile ◽  
Developmental Domains

AbstractThe diversity reflected by >100 different neural cell types fundamentally contributes to brain function and a central idea is that neuronal identity can be inferred from genetic information. Recent large-scale transcriptomic assays seem to confirm this hypothesis, but a lack of morphological information has limited the identification of several known cell types. In this study, we used single-cell RNA-seq in morphologically identified parvalbumin interneurons (PV-INs), and studied their transcriptomic states in the morphological, physiological, and developmental domains. Overall, we find high transcriptomic similarity among PV-INs, with few genes showing divergent expression between morphologically different types. Furthermore, PV-INs show a uniform synaptic cell adhesion molecule (CAM) profile, suggesting that CAM expression in mature PV cells does not reflect wiring specificity after development. Together, our results suggest that while PV-INs differ in anatomy and in vivo activity, their continuous transcriptomic and homogenous biophysical landscapes are not predictive of these distinct identities.

scholarly journals Identifying cell types from single-cell data based on similarities and dissimilarities between cells

2021 ◽  
Vol 22 (S3) ◽  
Author(s):  
Yuanyuan Li ◽  
Ping Luo ◽  
Yi Lu ◽  
Fang-Xiang Wu
Keyword(s):  
Gene Expression ◽  
Single Cell ◽  
Spectral Clustering ◽  
Incidence Matrix ◽  
Expression Patterns ◽  
Cell Types ◽  
Clustering Method ◽  
Different Types ◽  
Cell Data ◽  
Spectral Clustering Method

Abstract Background With the development of the technology of single-cell sequence, revealing homogeneity and heterogeneity between cells has become a new area of computational systems biology research. However, the clustering of cell types becomes more complex with the mutual penetration between different types of cells and the instability of gene expression. One way of overcoming this problem is to group similar, related single cells together by the means of various clustering analysis methods. Although some methods such as spectral clustering can do well in the identification of cell types, they only consider the similarities between cells and ignore the influence of dissimilarities on clustering results. This methodology may limit the performance of most of the conventional clustering algorithms for the identification of clusters, it needs to develop special methods for high-dimensional sparse categorical data. Results Inspired by the phenomenon that same type cells have similar gene expression patterns, but different types of cells evoke dissimilar gene expression patterns, we improve the existing spectral clustering method for clustering single-cell data that is based on both similarities and dissimilarities between cells. The method first measures the similarity/dissimilarity among cells, then constructs the incidence matrix by fusing similarity matrix with dissimilarity matrix, and, finally, uses the eigenvalues of the incidence matrix to perform dimensionality reduction and employs the K-means algorithm in the low dimensional space to achieve clustering. The proposed improved spectral clustering method is compared with the conventional spectral clustering method in recognizing cell types on several real single-cell RNA-seq datasets. Conclusions In summary, we show that adding intercellular dissimilarity can effectively improve accuracy and achieve robustness and that improved spectral clustering method outperforms the traditional spectral clustering method in grouping cells.

scholarly journals Constitutive Modeling of the Densification Behavior in Open-Porous Cellular Solids

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2731
Author(s):  
Ameya Rege
Keyword(s):  
Constitutive Model ◽  
Cell Walls ◽  
Compressive Strain ◽  
Pore Collapse ◽  
Compressive Response ◽  
Linear Elastic ◽  
Nonlinear Springs ◽  
Different Types ◽  
Point Of Intersection ◽  
Good Agreement

The macroscopic mechanical behavior of open-porous cellular materials is dictated by the geometric and material properties of their microscopic cell walls. The overall compressive response of such materials is divided into three regimes, namely, the linear elastic, plateau and densification. In this paper, a constitutive model is presented, which captures not only the linear elastic regime and the subsequent pore-collapse, but is also shown to be capable of capturing the hardening upon the densification of the network. Here, the network is considered to be made up of idealized square-shaped cells, whose cell walls undergo bending and buckling under compression. Depending on the choice of damage criterion, viz. elastic buckling or irreversible bending, the cell walls collapse. These collapsed cells are then assumed to behave as nonlinear springs, acting as a foundation to the elastic network of active open cells. To this end, the network is decomposed into an active network and a collapsed one. The compressive strain at the onset of densification is then shown to be quantified by the point of intersection of the two network stress-strain curves. A parameter sensitivity analysis is presented to demonstrate the range of different material characteristics that the model is capable of capturing. The proposed constitutive model is further validated against two different types of nanoporous materials and shows good agreement.

scholarly journals FlsnRNA-seq: protoplasting-free full-length single-nucleus RNA profiling in plants

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Yanping Long ◽  
Zhijian Liu ◽  
Jinbu Jia ◽  
Weipeng Mo ◽  
Liang Fang ◽  
...  
Keyword(s):  
Single Cell ◽  
Cell Walls ◽  
Large Scale ◽  
Full Length ◽  
Cell Level ◽  
Root Cells ◽  
Rna Profiling ◽  
Different Types ◽  
Long Read ◽  
Single Nucleus

AbstractThe broad application of single-cell RNA profiling in plants has been hindered by the prerequisite of protoplasting that requires digesting the cell walls from different types of plant tissues. Here, we present a protoplasting-free approach, flsnRNA-seq, for large-scale full-length RNA profiling at a single-nucleus level in plants using isolated nuclei. Combined with 10x Genomics and Nanopore long-read sequencing, we validate the robustness of this approach in Arabidopsis root cells and the developing endosperm. Sequencing results demonstrate that it allows for uncovering alternative splicing and polyadenylation-related RNA isoform information at the single-cell level, which facilitates characterizing cell identities.

Sign in / Sign up

Export Citation Format

Share Document