Microstructure and cementation of two carbonatic fine-grained soils

2019 ◽  
Vol 56 (3) ◽  
pp. 320-334 ◽  
Author(s):  
Alain El Howayek ◽  
Antonio Bobet ◽  
Marika Santagata
Keyword(s):  
Coating Layer ◽  
Engineering Properties ◽  
Carbonate Content ◽  
Carbonate Dissolution ◽  
Moderate Degree ◽  
Compression Tests ◽  
One Dimensional ◽  
X Ray ◽  
Fine Grained ◽  
Carbonate Cementation

This paper presents an investigation of the microstructure and cementation of two carbonatic fine-grained soils obtained from a deposit of lacustrine origin formed during the Wisconsin glaciation. The two soils differ in the degree of cementation (with average total carbonate contents of ∼55% and ∼38%), the dominating carbonate mineral (calcite versus dolomite), and the forms of carbonates present. The study is founded on observations of the microstructure using scanning electron microscopy (SEM) equipped with energy-dispersive X-ray (EDX) spectrometry, and examination of the effects of carbonate dissolution on Atterberg limits and particle-size distribution. In both soils, the majority of the carbonate is in the form of a coating layer on the clay and silt particles, with a thickness less than 2–3 μm, and decreasing in the sample with lower carbonate content. This coating layer “networks” particles and groups of particles. Carbonate cementation impacts the engineering properties of both soils, and the site’s overconsolidation ratio (OCR) profile clearly reflects changes in carbonate content and microstructure. One-dimensional compression tests show that cementation is associated with a moderate degree of structuring, and that the resulting structure is stable, with no complete destructuration occurring even after the effective stress exceeds 10 times the preconsolidation stress.

scholarly journals Use of Reservoir Sediments to Improve Engineering Properties of Dune Sand in Oman

2021 ◽  
Vol 11 (4) ◽  
pp. 1620
Author(s):  
Mohsin Usman Qureshi ◽  
Maryam Alsaidi ◽  
Mubashir Aziz ◽  
Ilhan Chang ◽  
Ali Murtaza Rasool ◽  
...  
Keyword(s):  
Binary Mixture ◽  
Engineering Properties ◽  
Dry Density ◽  
Compression Tests ◽  
Dune Sand ◽  
Maximum Dry Density ◽  
Uniformity Coefficient ◽  
Fine Grained ◽  
Sediment Content ◽  
Optimum Water Content

Managing sediments dredged from reservoirs of recharge dams is an environmental issue, however, these sediments can be an abundant and economical source of fine-grained fill soil. This experimental investigation quantifies the geotechnical properties of a reservoir sediment used to improve engineering properties of a poorly graded dune sand in Oman. The binary mixes were prepared with different percentages (5, 10, 20, 50, 75, 90, 95%) of sediment with sand. Laboratory tests such as gradation, consistency limits, compaction, and unconfined compression tests were performed to measure the engineering characteristics of the binary mixtures. The results showed that the maximum dry density increases up to a sediment content of 50% and then decreases with further increase in the sediment content. The optimum water content increases with the increase in sediment content from 17% for pure sand to 22.5% for pure sediment. The optimum moisture content shows a good correlation with the plastic limit of the binary mixture of sand and sediment. The unconfined compressive strength substantially increases with sediment content up to 75% and then decreases with further increase in the sediment content. The binary mixture of sand sediment is sensitive to moisture, however, the order of strength stability against moisture is dune sand mixed with 75, 50, and 20% sediments. The addition of sediment to dune sand improved the uniformity coefficient to some extent with an increase in the maximum and minimum void ratios as well. The elemental analysis of the sediment confirms that the material is non-contaminated and can be employed in geotechnical engineering applications as a sustainable and environmentally friendly solution.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

X-ray Crystallographic Study of Alkylammonium Anthracene-9-carboxylates as a Model for Fibrous Structure of Binary Anthracene Salt Gels

2004 ◽  
Vol 69 (6) ◽  
pp. 1292-1300 ◽  
Author(s):  
Tahahiro Tani ◽  
Kazuki Sada ◽  
Masatsugu Ayabe ◽  
Yuya Iwashita ◽  
Takanori Kishida ◽  
...  
Keyword(s):  
Alkyl Chain ◽  
Columnar Structure ◽  
Hydrogen Bond Network ◽  
One Dimensional ◽  
X Ray ◽  
Crystallographic Study ◽  
Alkylammonium Salts ◽  
Bond Network ◽  
Fibrous Assemblies ◽  
Long Alkyl Chain

Crystal structure of hexylammonium anthracene-9-carboxylate was investigated. The salt was arranged by a one-dimensional hydrogen bond network to form a columnar structure in the crystalline state. This columnar structure should be the model of fibrous assemblies in the organogels of anthracene-9-carboxylate alkylammonium salts having a long alkyl chain.

scholarly journals Development of a synchrotron powder diffractometer with a one-dimensional X-ray detector for analysis of advanced materials

2013 ◽  
Vol 121 (1411) ◽  
pp. 287-290 ◽  
Author(s):  
Masahiko TANAKA ◽  
Yoshio KATSUYA ◽  
Yoshitaka MATSUSHITA ◽  
Osami SAKATA
Keyword(s):  
Advanced Materials ◽  
One Dimensional ◽  
X Ray ◽  
Powder Diffractometer

scholarly journals Solvent-Controlled Self-Assembled Oligopyrrolic Receptor

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1771
Author(s):  
Fei Wang ◽  
Kejiang Liang ◽  
Mads Christian Larsen ◽  
Steffen Bähring ◽  
Masatoshi Ishida ◽  
...  
Keyword(s):  
Materials Science ◽  
Science Research ◽  
Polymeric Chain ◽  
Supramolecular System ◽  
Receptor System ◽  
One Dimensional ◽  
X Ray ◽  
Host Guest Complex ◽  
Colorimetric Response ◽  
Strong Acids

We report a fully organic pyridine-tetrapyrrolic U-shaped acyclic receptor 10, which prefers a supramolecular pseudo-macrocyclic dimeric structure (10)2 in a less polar, non-coordinating solvent (e.g., CHCl3). Conversely, when it is crystalized from a polar, coordinating solvent (e.g., N,N-dimethylformamide, DMF), it exhibited an infinite supramolecular one-dimensional (1D) “zig-zag” polymeric chain, as inferred from the single-crystal X-ray structures. This supramolecular system acts as a potential receptor for strong acids, e.g., p-toluenesulfonic acid (PTSA), methane sulfonic acid (MSA), H2SO4, HNO3, and HCl, with a prominent colorimetric response from pale yellow to deep red. The receptor can easily be recovered from the organic solution of the host–guest complex by simple aqueous washing. It was observed that relatively stronger acids with pKa < −1.92 in water were able to interact with the receptor, as inferred from 1H NMR titration in tetrahydrofuran-d8 (THF-d8) and ultraviolet–visible (UV–vis) spectroscopic titrations in anhydrous THF at 298 K. Therefore, this new dynamic supramolecular receptor system may have potentiality in materials science research.

Measurement of the parameters of a linear CCD structure as a one-dimensional X-ray imaging detector

1983 ◽  
Vol 208 (1-3) ◽  
pp. 427-433 ◽  
Author(s):  
M.G. Fedotov ◽  
E.A. Kuper ◽  
V.N. Litvinenko ◽  
V.E. Panchenko ◽  
V.A. Ushakov
Keyword(s):  
One Dimensional ◽  
X Ray ◽  
Linear Ccd ◽  
X Ray Imaging ◽  
Imaging Detector

Crystal structure of the anticancer drug carmustine determined by X-ray powder diffraction

2021 ◽  
pp. 1-3
Author(s):  
Carina Schlesinger ◽  
Edith Alig ◽  
Martin U. Schmidt
Keyword(s):  
Crystal Structure ◽  
Anticancer Drug ◽  
Powder Diffraction ◽  
Room Temperature ◽  
Powder Diffraction Data ◽  
Orthorhombic Space Group ◽  
Commercial Sample ◽  
One Dimensional ◽  
X Ray ◽  
Hydrogen Bond Pattern

The structure of the anticancer drug carmustine (1,3-bis(2-chloroethyl)-1-nitrosourea, C5H9Cl2N3O2) was successfully determined from laboratory X-ray powder diffraction data recorded at 278 K and at 153 K. Carmustine crystallizes in the orthorhombic space group P212121 with Z = 4. The lattice parameters are a = 19.6935(2) Å, b = 9.8338(14) Å, c = 4.63542(6) Å, V = 897.71(2) ų at 153 K, and a = 19.8522(2) Å, b = 9.8843(15) Å, c = 4.69793(6) Å, V = 921.85(2) ų at 278 K. The Rietveld fits are very good, with low R-values and smooth difference curves of calculated and experimental powder data. The molecules form a one-dimensional hydrogen bond pattern. At room temperature, the investigated commercial sample of carmustine was amorphous.

scholarly journals Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 461
Author(s):  
Konrad Kosiba ◽  
Konda Gokuldoss Prashanth ◽  
Sergio Scudino
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Equilibrium Phase ◽  
Antibacterial Properties ◽  
Equilibrium Phase Diagram ◽  
Compressive Yield Strength ◽  
X Ray ◽  
Fine Grained ◽  
Equilibrium Phases

The phase and microstructure formation as well as mechanical properties of the rapidly solidified Mg67Ag33 (at. %) alloy were investigated. Owing to kinetic constraints effective during rapid cooling, the formation of equilibrium phases is suppressed. Instead, the microstructure is mainly composed of oversaturated hexagonal closest packed Mg-based dendrites surrounded by a mixture of phases, as probed by X-ray diffraction, electron microscopy and energy dispersive X-ray spectroscopy. A possible non-equilibrium phase diagram is suggested. Mainly because of the fine-grained dendritic and interdendritic microstructure, the material shows appreciable mechanical properties, such as a compressive yield strength and Young’s modulus of 245 ± 5 MPa and 63 ± 2 GPa, respectively. Due to this low Young’s modulus, the Mg67Ag33 alloy has potential for usage as biomaterial and challenges ahead, such as biomechanical compatibility, biodegradability and antibacterial properties are outlined.

Russellite: a second occurrence

1970 ◽  
Vol 37 (290) ◽  
pp. 705-707 ◽  
Author(s):  
L. C. Hodge
Keyword(s):  
Powder Diffraction ◽  
Western Australia ◽  
Original Description ◽  
Chemical Data ◽  
Green Material ◽  
X Ray ◽  
Fine Grained ◽  
Physical And Chemical ◽  
Pale Green

SummaryRussellite Bi2O3. WO3 occurs in a small pegmatite near Poona, Western Australia. The fine-grained yellow to pale green material is an inseparable mixture of russellite, bismite, koechlinite, and bismutite. X-ray powder diffraction, physical, and chemical data agree in general with the original description of the mineral from Cornwall, England. The original analyses made on micro quantities are now supplemented by analyses on macro quantities.

Sign in / Sign up

Export Citation Format

Share Document