scholarly journals Thermal and mechanical properties of PCM-incorporated normal and lightweight concretes containing silica fume

2019 ◽  
Vol 46 (7) ◽  
pp. 643-656 ◽  
Author(s):  
Amin Moshtaghi Jafarabad ◽  
Morteza Madhkhan ◽  
Naser P. Sharifi
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Thermal Performance ◽  
Phase Change Materials ◽  
Mechanical Characteristics ◽  
Lightweight Aggregate ◽  
Salt Hydrate ◽  
Promising Strategy ◽  
Compressive Strength Of Concrete ◽  
Physical And Mechanical Characteristics

Improving the thermal performance of concrete, as an important construction and pavement material, by incorporating phase change materials (PCMs) has been the topic of much research. Also, various carrier agents such as lightweight aggregate (LWA) have been introduced to incorporate PCMs into concrete. However, incorporation of PCM-impregnated LWA reduces the compressive strength of concrete. In this study, the application of silica fume to improve the compressive strength of PCM-incorporated concrete is investigated. Two types of PCMs, salt hydrate PCM and polyethylene glycol PCM, were incorporated into concrete via scoria LWA, and different physical and mechanical characteristics of the concrete were studied when silica fume was incorporated into the mix. The results show that incorporation of silica fume increases the compressive strength of PCM-incorporated concrete, and at the same time does not diminish the thermal performance of the incorporated PCM. Therefore, incorporation of silica fume was found to be a promising strategy to improve the compressive strength of PCM-incorporated concrete.

scholarly journals OPTIMAL PERFORMANCE CHARACTERISTICS OF MORTAR INCORPORATING PHASE CHANGE MATERIALS AND SILICA FUME

2017 ◽  
Vol 12 (2) ◽  
pp. 59-78 ◽  
Author(s):  
Alan Richardson ◽  
Ashraf Heniegal ◽  
Jess Tindall
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Phase Change ◽  
Silica Fume ◽  
Thermal Performance ◽  
Phase Change Materials ◽  
Mechanical Characteristics ◽  
Total Solid ◽  
Solid Materials ◽  
Heating And Cooling

This paper examines the thermal performance of 20 different mortar mixes, which were prepared in order to study the behaviour of mortar incorporating Phase Change Materials (PCM). The PCM was used at a rate of 10, 20 and 30% by weight of total solid materials. Silica fume was added to the mixes by 10, 20, 30 and 50% by weight of cement to enhance the mortar properties. Mortars which incorporate phase-change materials (PCM) have the capability to help regulate the temperature inside buildings, contributing to the thermal comfort while decreasing the amount of mechanical heating and cooling energy required, therefore they have the potential to reduce building carbon emissions. The mechanical characteristics and physical properties of the mortar with PCM were studied. The results show that mortar with Phase Change Materials up to PCM20% can be used with an optimal compressive strength. Silica fume (SF), up to a 20% SF addition, enhanced the mechanical properties of the mortar.

Physical and mechanical characteristics of cement mortars and concretes with addition of clinoptilolite from Beli Plast deposit (Bulgaria), silica fume and fly ash

Clay Minerals ◽  
2011 ◽  
Vol 46 (2) ◽  
pp. 213-223 ◽  
Author(s):  
V. Lilkov ◽  
I. Rostovsky ◽  
O. Petrov
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Mechanical Characteristics ◽  
Physical And Mechanical Properties ◽  
Specific Pore Volume ◽  
Cement Mortars ◽  
Physical And Mechanical Characteristics

AbstractCement mortars and concretes incorporating clinoptilolite, silica fume and fly ash were investigated for changes in their physical and mechanical properties. It was found that additions of 10% clinoptilolite and 10% Pozzolite (1:1 mixture of silica fume and fly ash) were optimal for improvement of the quality of the hardened products, giving 8% and 13% increases in flexural and compressive strength respectively. The specific pore volume of the mortars incorporating zeolite decreased between the 28th and 180th day to levels below the values for the control composition due to the fact that clinoptilolite exhibits its pozzolanic activity later in the hydration. In these later stages, pores with radii below 500 nm increased at the expense of larger pores. The change in the pore-size distribution between the first and sixth months of hydration occurs mostly in the mortars with added zeolite.

scholarly journals STRUCTURAL CONCRETE MODIFIED WITH SCALLOP SHELL LIME

2021 ◽  
Vol 36 (3) ◽  
Author(s):  
Ronal Alex Mauricio Villarrial ◽  
◽  
Marlon Gaston Farfan Cordova ◽  
Keyword(s):  
Compressive Strength ◽  
Mechanical Characteristics ◽  
Concrete Strength ◽  
Calcium Content ◽  
Cement Type ◽  
Scallop Shell ◽  
High Calcium ◽  
Compressive Strength Of Concrete ◽  
Natural Aggregates ◽  
Physical And Mechanical Characteristics

This research was conducted to determine the effect of the scallop shell lime (SSL) on the compressive strength of concrete made with Portland cement type Ico and natural aggregates from a quarry, where SSL was added at 3%, 4% and 5%. The physical and mechanical characteristics of the aggregates were determined based on the N.T.P. 400.037/ASTM C22 standard, and the mix design was carried out through the ACI method. The SSL was used due to the high calcium content present in the valve. Standard concrete controls were prepared and cured by adding 3%, 4% and 5% SSL (339.0183/ASTM C192M), which were analyzed at 7, 14 and 28 days of curing. The results showed that the compressive strength at 28 days was 242.63 kg/cm2 when 3% SSL was added, increasing with respect to the standard control by 16%. With the addition of 4% SSL, the maximum strength reached was 245.25 kg/cm2, and with 5%, the compressive strength reached was 261.17 kg/cm2, increasing by 24%. In conclusion, the SSL positively affects the increase of concrete strength, and the percentage with the highest incidence is 5%.

scholarly journals Investigation of the Role of Nano-Titanium on Corrosion and Thermal Performance of Structural Concrete with Macro-Encapsulated PCM

Molecules ◽  
2019 ◽  
Vol 24 (7) ◽  
pp. 1360 ◽  
Author(s):  
Ehsan Mohseni ◽  
Waiching Tang ◽  
Shanyong Wang
Keyword(s):  
Compressive Strength ◽  
Thermal Performance ◽  
Phase Change Materials ◽  
Test Results ◽  
Structural Concrete ◽  
Coarse Aggregates ◽  
Thermal Test ◽  
Compressive Strength Of Concrete ◽  
The Impact

The present study aims to investigate the impact of thermal energy storage aggregate (TESA) and nano-titanium (NT) on properties of structural concrete. TESA was made of scoria encapsulated with phase change materials (PCMs). Coarse aggregates were replaced by TESA at 100% by volume of aggregate and NT was added at 5% by weight of cement. Compressive strength, probability of corrosion, thermal performance, and microstructure properties were studied. The results indicated that the presence of TESA reduced the compressive strength of concrete, although the strength was still high enough to be used as structural concrete. The use of TESA significantly improved the thermal performance of concrete, and slightly improved the resistance of corrosion in concrete. The thermal test results showed that TESA concrete reduces the peak temperature by 2 °C compared to the control. The addition of NT changed the microstructure of concrete, which resulted in higher compressive strength. Additionally, the use of NT further enhanced the thermal performance of TESA concrete by reducing the probability of corrosion remarkably. These results confirmed the crucial role of NT in improving the permeability and the thermal conductivity of mixtures containing PCM. In other words, the charging and discharging of TESA was enhanced with the presence of NT in the mixture.

scholarly journals Amorphous fiber based on the Fe-B-C molten system for bulk reinforcement of concrete

2018 ◽  
Vol 245 ◽  
pp. 03019 ◽  
Author(s):  
Artemiy Cherkashin ◽  
Yasmin Begich ◽  
Polina Sherstobitova ◽  
Oleg Tolochko
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Mechanical Characteristics ◽  
Test Material ◽  
Comparative Tests ◽  
Physical And Mechanical Characteristics

The article deals with the use of amorphous fiber of the Fe-B-C system, which was obtained by spinning the melt. Comparative tests of the samples made on the basis of the test material on the compressive strength and tensile strength of the traditional destructive method were made. The conductivity of the samples was also tested. Physical and mechanical characteristics of the material are obtained.

scholarly journals Research on Mechanical Performance & Behaviour of Geopolymer Concrete Subjected to Elevated Temperatures

2019 ◽  
Vol 8 (2S8) ◽  
pp. 883-887
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Geopolymer Concrete ◽  
Sem Images ◽  
Before And After ◽  
Alkaline Conditions ◽  
Compressive Strength Of Concrete

The investigative studies on mechanical performance & behaviour, of Geopolymer Concrete (GPC) before and after the exposure to elevated temperatures (of 200 0 C -1000 0 C with an increment of 100 0 C). Indicate that the GPC Specimens Exhibited better Compressive strength at higher temperatures than that of those made by regular OPC Concrete with M30 Grade. The chronological changes in the geopolymeric structure upon exposure to these temperatures and their reflections on the thermal behaviour have also been explored. The SEM images indicate GPC produced by fly ash , metakaolin and silica fume, under alkaline conditions form Mineral binders that are not only non-flammable and but are also non-combustible resins and binders. Further the Observations drawn disclose that the mass and compressive strength of concrete gets reduced with increase in temperatures.

scholarly journals Assessment of Workability and Compressive Strength of Rice Husk Ash-Blended Palm Kernel Shell Concrete

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
K. O. Oriola
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Construction Materials ◽  
Palm Kernel ◽  
Lightweight Aggregate ◽  
Strength Properties ◽  
Lightweight Aggregate Concrete ◽  
Palm Kernel Shell ◽  
Compressive Strength Of Concrete

The evaluation of agro-industrial by-products as alternative construction materials is becoming more significant as the demand for environmentally friendly construction materials increases. In this study, the workability and compressive strength of concrete produced by combining Palm Kernel Shell (PKS) and Rice Husk Ash (RHA) was investigated. Concrete mixes using a fixed content of 15% RHA as replacement for cement and 20, 40, 60, 80 and 100% PKS as replacement for crushed granite by volume with the mix ratios of 1:1½:3, 1:2:4 and 1:3:6 were produced. The water-to-cement ratios of 0.5, 0.6 and 0.7 were used for the respective mix ratios. Concrete without PKS and RHA served as control mix. The fresh concrete workability was evaluated through slump test. The concrete hardened properties determined were the density and compressive strength. The results indicated that the workability and density of PKSC were lower than control concrete, and they decreased as the PKS content in each mix ratio was increased. The compressive strength of concrete at 90 days decreased from 27.8-13.1 N/mm2, 23.8-8.9 N/mm2and 20.6-7.6 for 1:1½:3, 1:2:4 and 1:3:6, respectively as the substitution level of PKS increased from 0-100%. However, the compressive strength of concrete increased with curing age and the gain in strength of concrete containing RHA and PKSC were higher than the control at the later age. The concrete containing 15% RHA with up to 40% PKS for 1:1½:3 and 20% PKS for 1:2:4 mix ratios satisfied the minimum strength requirements for structural lightweight aggregate concrete (SLWAC) stipulated by the relevant standards. It can be concluded that the addition of 15% RHA is effective in improving the strength properties of PKSC for eco-friendly SLWAC production..

scholarly journals Strength Characteristics of High Strength Concrete (HSC) with and without Coarse Aggregate

2019 ◽  
Vol 9 (2) ◽  
pp. 4701-4704
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Mechanical Characteristics ◽  
Coarse Aggregate ◽  
High Strength ◽  
Set Up

This paper aimed to investigate the mechanical characteristics of HSC of M60 concrete adding 25% of fly ash to cement and sand and percentage variations of silica fumes 0%,5% and 10% to cement with varying sizes of 10mm,6mm,2mm and powder of granite aggregate with w/c of 0.32. Specimens are tested for compressive strength using 10cm X 10cmX10cm cubes for 7,14,28 days flexural strength was determined by using 10cmX10cmX50cm beam specimens at 28 days and 15cm diameter and 30cm height cylinder specimens at 28 days using super plasticizers of conplast 430 as a water reducing agent. In this paper the experimental set up is made to study the mechanical properties of HSC with and without coarse aggregate with varying sizes as 10mm, 6mm, 2mm and powder. Similarly, the effect of silica fume on HSC by varying its percentages as 0%, 5% and 10% in the mix studied. For all mixes 25% extra fly ash has been added for cement and sand.

Development of Cement Compositions with a Finely Dispersed Additive for Consolidation of Soil by the Injection

2019 ◽  
Vol 974 ◽  
pp. 149-155
Author(s):  
Irina V. Kozlova ◽  
Alexey E. Bespalov ◽  
Alexandra V. Bespalova
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Mechanical Characteristics ◽  
Cement Stone ◽  
Soil Consolidation ◽  
Injection Solution ◽  
Concentrated Load ◽  
Reduced Viscosity ◽  
Injection Technology ◽  
Physical And Mechanical Characteristics

Cement compositions prepared by mixing cement with a stabilized finely dispersed slag suspension, which allow improving the structural, physical and mechanical characteristics of the cement stone are considered. On the first day of hardening, the strength of modified specimens increased by 54%, at the grade age - by 43%, and the porosity decreased by 13.8 and 17.3%, respectively. The possibility of obtaining an injection solution for soil consolidation on the basis of Portland cement and a stabilized slag suspension with the concentration of a finely dispersed slag of 50 g/l is considered. Studies have shown that the injection solution under study has reduced viscosity and sedimentation, increased compressive strength. After 28 days of hardening, the strength was 14.2 MPa, which is higher than the recommended values ​​for consolidation of soil under the foundations (4-6 MPa), and at a concentrated load, for the base under the foundations of the columns (9-10 MPa). The data obtained allows considering an injection solution based on Portland cement and slag suspension for the use in the injection technology of soil consolidation.

Sign in / Sign up

Export Citation Format

Share Document