Laser ablation ICP MS trace element composition of native gold from the Abitibi Greenstone belt, Timmins Ontario.

2021 ◽  
Author(s):  
John D. Greenough ◽  
Alejandro Velasquez ◽  
Mohamed Shaheen ◽  
Joel Gagnon ◽  
Brian J. Fryer ◽  
...  
Keyword(s):  
Trace Elements ◽  
Laser Ablation ◽  
Trace Element ◽  
Greenstone Belt ◽  
Native Gold ◽  
Internal Standard ◽  
Gold Deposits ◽  
Ore Deposits ◽  
Abitibi Greenstone Belt ◽  
Icp Ms

Trace elements in native gold provide a “fingerprint” that tends to be unique to individual gold deposits. Fingerprinting can distinguish gold sources and potentially yield insights into geochemical processes operating during gold deposit formation. Native gold grains come from three historical gold ore deposits; Hollinger, McIntyre (quartz-vein ore), and Aunor near Timmins, Ontario, at the western end of the Porcupine gold camp and the south-western part of the Abitibi greenstone belt. Laser-ablation, inductively-coupled plasma mass spectrometry (LA ICP MS) trace element concentrations were determined on 20 to 25 µm wide, 300 µm long rastor trails in ~ 60 native gold grains. Analyses used Ag as an internal standard with Ag and Au determined by a scanning electron microscope with an energy dispersive spectrometer. The London Bullion Market AuRM2 reference material served as the external standard for 21 trace element analytes (Al, As, Bi, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Pd, Pt, Rh, Sb, Se, Si, Sn, Te, Ti, Zn; Se generally below detection in samples). Trace elements in native gold associate according to Goldschmidt’s classification of elements strongly suggesting that element behavior in native Au is not random. Such element behavior suggests that samples from each Timmins deposit formed under similar but slightly variable geochemical conditions. Chalcophile and siderophile elements provide the most compelling fingerprints of the three ore deposits and appear to be mostly in solid solution in Au. Lithophile elements are not very useful for distinguishing these deposits and element ABSTRACT CUT OFF BY SOFTWARE

scholarly journals Trace Elements in Magnetite from the Pagoni Rachi Porphyry Prospect, NE Greece: Implications for Ore Genesis and Exploration

Minerals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 725 ◽  
Author(s):  
Constantinos Mavrogonatos ◽  
Panagiotis Voudouris ◽  
Jasper Berndt ◽  
Stephan Klemme ◽  
Federica Zaccarini ◽  
...  
Keyword(s):  
Trace Elements ◽  
Laser Ablation ◽  
Trace Element ◽  
Inductively Coupled Plasma ◽  
Ore Deposits ◽  
Hydrothermal Conditions ◽  
Northern Greece ◽  
Icp Ms ◽  
Accessory Phase ◽  
Granodiorite Porphyry

Magnetite is a common accessory phase in various types of ore deposits. Its trace element content has proven to have critical implications regarding petrogenesis and as guides in the exploration for ore deposits in general. In this study we use LA-ICP-MS (laser ablation-inductively coupled plasma-mass spectrometry) analyses of trace elements to chemically characterize magnetite from the Pagoni Rachi Cu–Mo–Re–Au porphyry-style prospect, Thrace, northern Greece. Igneous magnetite mostly occurs as euhedral grains, which are commonly replaced by hematite in fresh to propylitic-altered granodiorite porphyry, whereas, hydrothermal magnetite forms narrow veinlets or is disseminated in sodic/potassic-calcic altered (albite + K-feldspar + actinolite + biotite + chlorite) granodiorite porphyry. Magnetite is commonly associated with chalcopyrite and pyrite and locally exhibits martitization. Laser ablation ICP-MS analyses of hydrothermal magnetite yielded elevated concentrations in several trace elements (e.g., V, Pb, W, Mo, Ta, Zn, Cu, and Nb) whereas Ti, Cr, Ni, and Sn display higher concentration in its magmatic counterpart. A noteworthy enrichment in Mo, Pb, and Zn is an unusual feature of hydrothermal magnetite from Pagoni Rachi. High Si, Al, and Ca values in a few analyses of hydrothermal magnetite imply the presence of submicroscopic or nano-inclusions (e.g., chlorite, and titanite). The trace element patterns of the hydrothermal magnetite and especially the decrease in its Ti content reflect an evolution from the magmatic towards the hydrothermal conditions under decreasing temperatures, which is consistent with findings from analogous porphyry-style deposits elsewhere.

Laser ablation ICP-MS trace element systematics of hydrothermal pyrite in gold deposits of the Kalgoorlie district, Western Australia

2020 ◽  
Vol 55 (4) ◽  
pp. 823-844 ◽  
Author(s):  
Marcelo Godefroy-Rodríguez ◽  
Steffen Hagemann ◽  
Max Frenzel ◽  
Noreen J. Evans
Keyword(s):  
Laser Ablation ◽  
Trace Element ◽  
Western Australia ◽  
Gold Deposits ◽  
Icp Ms

TRACE ELEMENT ANALYSIS OF PYRITES IN GAS SHALES BY LASER ABLATION ICP-MS: IMPLICATIONS FOR MOBILITY

2017 ◽  
Author(s):  
Amy K. Plechacek ◽  
◽  
Madeline E. Schreiber ◽  
John A. Chermak ◽  
Tracy L. Bank
Keyword(s):  
Laser Ablation ◽  
Trace Element ◽  
Trace Element Analysis ◽  
Element Analysis ◽  
Icp Ms ◽  
Gas Shales

CALCITE U-Pb DATING UNRAVELS THE AGE AND HYDROTHERMAL HISTORY OF THE GIANT SHUIYINDONG CARLIN-TYPE GOLD DEPOSIT IN THE GOLDEN TRIANGLE, SOUTH CHINA

2021 ◽  
Vol 116 (6) ◽  
pp. 1253-1265
Author(s):  
Xiao-Ye Jin ◽  
Jian-Xin Zhao ◽  
Yue-Xing Feng ◽  
Albert H. Hofstra ◽  
Xiao-Dong Deng ◽  
...  
Keyword(s):  
Gold Deposit ◽  
Early Cretaceous ◽  
South China ◽  
Gold Deposits ◽  
Ore Deposits ◽  
Late Triassic ◽  
Gold Deposition ◽  
Golden Triangle ◽  
Icp Ms ◽  
Carlin Type Gold Deposits

Abstract The ages of Carlin-type gold deposits in the Golden Triangle of South China have long been questioned due to the general lack of minerals unequivocally linked to gold deposition that can be precisely dated using conventional radiogenic isotope techniques. Recent advances in U-Pb methods show that calcite can be used to constrain the ages of hydrothermal processes, but few studies have been applied to ore deposits. Herein, we show that this approach can be used to constrain the timing of hydrothermal activity that generated and overprinted the giant Shuiyindong Carlin-type gold deposit in the Golden Triangle. Three stages of calcite (Cal-1, Cal-2, and Cal-3) have been recognized in this deposit based on crosscutting relationships, cathodoluminescence colors, and chemical (U, Pb, and rare earth element [REE]) and isotope (C, O, Sr) compositions. Cal-1 is texturally associated with ore-stage jasperoid and disseminated Au-bearing arsenian pyrite in hydrothermally altered carbonate rocks, which suggests it is synmineralization. Cal-2 fills open spaces and has a distinct orange cathodoluminescence, suggesting that it precipitated during a second fluid pulse. Cal-1 and Cal-2 have similar carbonate rock-buffered chemical and isotopic compositions. Cal-3 occurs in veins that often contain realgar and/or orpiment and are chemically (low U, Pb, and REE) and isotopically (higher δ13C, lower δ18O and Sri values) distinct from Cal-1 and Cal-2, suggesting that it formed from a third fluid. U-Pb isotope analyses, by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) for U-rich Cal-1 and Cal-2 and by LA-multicollector (MC)-ICP-MS for U-poor Cal-3, yield well-defined age constraints of 204.3 to 202.6, 191.9, and 139.3 to 137.1 Ma for Cal-1, Cal-2, and Cal-3, respectively. These new ages suggest that the Shuiyindong gold deposit formed in the late Triassic and was overprinted by hydrothermal events in the early Jurassic and early Cretaceous. Given the association of Cal-3 with orpiment and realgar, and previous geochronologic studies of several other major gold deposits in the Golden Triangle, we infer that the latest stage of calcite may be associated with an early Cretaceous regional gold metallogenic event. Combined with existing isotopic ages in the region, these new ages lead us to propose that Carlin-type gold deposits in the Golden Triangle formed during two metallogenic episodes in extensional settings, associated with the late Triassic Indochina orogeny and early Cretaceous paleo-Pacific plate subduction. This study shows that the calcite U-Pb method can be used to constrain the timing of Carlin-type gold deposits and successive hydrothermal events.

Determination of trace elements in zeolites by laser ablation ICP-MS

2000 ◽  
Vol 368 (1) ◽  
pp. 79-87 ◽  
Author(s):  
C. Pickhardt ◽  
I. B. Brenner ◽  
J. S. Becker ◽  
H.-J. Dietze
Keyword(s):  
Trace Elements ◽  
Laser Ablation ◽  
Icp Ms

Dating polymetamorphism using titanite: Linking trace elements, textures, and ages

2021 ◽  
Author(s):  
Jesse Walters ◽  
Alicia Cruz-Uribe ◽  
Won Joon Song ◽  
Joshua Stone ◽  
Hanna Brooks ◽  
...  
Keyword(s):  
Trace Elements ◽  
Trace Element ◽  
Bulk Composition ◽  
Granulite Facies ◽  
Compositional Variation ◽  
Excimer Laser Ablation ◽  
Eu Anomaly ◽  
Fluid Infiltration ◽  
Icp Ms ◽  
The University

<p>Here we present titanite U-Pb dates from two banded calc silicate gneisses (SSP18-1A and 1B) from western Maine. Mineral textures and compositions display multiple phases of metamorphism. The peak lower granulite facies assemblage is Di + Kfs + Pl + Ttn, with little to no calcite present. Late Czo + Tr replaces Di + Pl, suggesting an influx of X<sub>H2O</sub> > 0.90 fluids. Nearby metapelites show the transition from sillimanite-bearing to muscovite-bearing assemblages, indicating that fluid infiltration may be widespread. Compositional maps of clinopyroxene in SSP18-1B show fracturing and rehealing of early Fe-rich diopside with late Mg-rich diopside. Both samples exhibit overprinting of An-rich plagioclase by increasingly Ab-rich plagioclase. Titanite grains in both samples exhibit BSE textures and compositional variation consistent with multiple phases of growth and dissolution-reprecipitation reactions.</p><p>Titanite trace element and U-Pb data were collected by LA-ICP-MS at the University of Maine using an ESI NWR193<sup>UC</sup> excimer laser ablation system coupled to an Agilent 8900 ICP-MS. Single spot ages range from 280 to 400 Ma with 12-20 Ma propagated 2SE. Four composition-date domains are identified in SSP18-1B: A. 400 ± 8 Ma (dark BSE cores), B. 372 ± 4 Ma (bright BSE cores), C. 342 ± 6 Ma (bright BSE cores, no Eu anomaly), and D. 302 ± 3 Ma (dark BSE rims, low LREE). Titanite Fe and Y concentrations increase with decreasing date, whereas Sr concentrations decrease. In clinopyroxene, Fe and Y decrease between high Fe-diopside and late Mg-diopside, placing the fracturing and rehealing events between 400 and 372 Ma. Strontium concentrations in titanite decrease between subsequent generations of plagioclase, diopside, and titanite, suggesting a continual fractionation of Sr from the reactive bulk composition. Low LREE in ca. 300 Ma titanite domains in both samples are consistent with the formation of texturally late allanite and clinozoisite, thus constraining the timing of the high X<sub>H2O</sub> fluid infiltration event. Zr-in-titanite temperatures for rims in the quartz-bearing SSP18-1B give a weighted mean T of 764 °C at 4.5 GPa, consistent with the muscovite-absent sillimanite-bearing assemblage in garnet cores from metapelite samples. However, the 100-150 °C lower Grt-Bt temperatures for metapelites are not consistent with peak metamorphic phase equilibria. Our data demonstrate the utility of linking titanite textures and trace element concentrations with those of other minerals to reveal past metamorphic and deformational events. Additionally, we show that titanite may reliably preserve U and Pb isotopic ratios, trace elements, and textures over subsequent high-T metamorphic events.</p>

Determination of major to trace elements in metallic materials based on the solid mixing calibration method using multiple spot-laser ablation-ICP-MS

2019 ◽  
Vol 34 (9) ◽  
pp. 1794-1799 ◽  
Author(s):  
Yoshiki Makino ◽  
Yasuo Kuroki ◽  
Takafumi Hirata
Keyword(s):  
Trace Elements ◽  
Laser Ablation ◽  
Analytical Method ◽  
Calibration Method ◽  
Metallic Materials ◽  
Icp Ms ◽  
Multiple Spot

We have developed a new analytical method for the determination of major to trace elements in metallic materials using multiple spot laser ablation (msLA)-ICP-MS.

scholarly journals Multivariate Statistical Analysis of Trace Elements in Pyrite: Prediction, Bias and Artefacts in Defining Mineral Signatures

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 61 ◽  
Author(s):  
Marija Dmitrijeva ◽  
Nigel J. Cook ◽  
Kathy Ehrig ◽  
Cristiana L. Ciobanu ◽  
Andrew V. Metcalfe ◽  
...  
Keyword(s):  
Trace Elements ◽  
Statistical Analysis ◽  
Trace Element ◽  
South Australia ◽  
Large Datasets ◽  
Ore Deposits ◽  
Partial Replacement ◽  
Multivariate Statistical ◽  
Wide Range ◽  
Olympic Dam

Pyrite is the most common sulphide in a wide range of ore deposits and well known to host numerous trace elements, with implications for recovery of valuable metals and for generation of clean concentrates. Trace element signatures of pyrite are also widely used to understand ore-forming processes. Pyrite is an important component of the Olympic Dam Cu–U–Au–Ag orebody, South Australia. Using a multivariate statistical approach applied to a large trace element dataset derived from analysis of random pyrite grains, trace element signatures in Olympic Dam pyrite are assessed. Pyrite is characterised by: (i) a Ag–Bi–Pb signature predicting inclusions of tellurides (as PC1); and (ii) highly variable Co–Ni ratios likely representing an oscillatory zonation pattern in pyrite (as PC2). Pyrite is a major host for As, Co and probably also Ni. These three elements do not correlate well at the grain-scale, indicating high variability in zonation patterns. Arsenic is not, however, a good predictor for invisible Au at Olympic Dam. Most pyrites contain only negligible Au, suggesting that invisible gold in pyrite is not commonplace within the deposit. A minority of pyrite grains analysed do, however, contain Au which correlates with Ag, Bi and Te. The results are interpreted to reflect not only primary patterns but also the effects of multi-stage overprinting, including cycles of partial replacement and recrystallisation. The latter may have caused element release from the pyrite lattice and entrapment as mineral inclusions, as widely observed for other ore and gangue minerals within the deposit. Results also show the critical impact on predictive interpretations made from statistical analysis of large datasets containing a large percentage of left-censored values (i.e., those falling below the minimum limits of detection). The treatment of such values in large datasets is critical as the number of these values impacts on the cluster results. Trimming of datasets to eliminate artefacts introduced by left-censored data should be performed with caution lest bias be unintentionally introduced. The practice may, however, reveal meaningful correlations that might be diluted using the complete dataset.

Sign in / Sign up

Export Citation Format

Share Document