Response of Two Arctic Amphipods, Gammarus zaddachi and Boeckosimus (Onisimus) affinis, to Variations in Temperature and Salinity

1975 ◽  
Vol 32 (12) ◽  
pp. 2564-2568 ◽  
Author(s):  
M. Busdosh ◽  
Ronald M. Atlas
Keyword(s):  
Respiration Rate ◽  
Ecological Distribution ◽  
Temperature Changes ◽  
Gammarus Zaddachi ◽  
Wide Range ◽  
Abrupt Changes ◽  
Response To Temperature

Two arctic amphipods were found to be capable of tolerating a wide range of temperatures and salinities. They were tolerant to both abrupt changes, as would occur in crossing a thermocline, and to gradual changes, as would occur seasonally.Gammarus zaddachi could survive lower salinities and higher temperatures than Boeckosimus (Onisimus) affinis. Salinity had a statistically significant effect on rates of respiration for both organisms, but only Gammarus zaddachi showed significant changes in respiration rate in response to temperature changes. The ecological distribution of these amphipods appears to be in part determined by their ability to tolerate fluctuations in salinity and temperature.

scholarly journals LED Rail Signals: Full Hardware Realization of Apparatus with Independent Intensity by Temperature Changes

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1291
Author(s):  
Giuseppe Schirripa Schirripa Spagnolo ◽  
Fabio Leccese
Keyword(s):  
Temperature Sensor ◽  
Energy Efficient ◽  
Light Emitting Diode ◽  
Junction Temperature ◽  
Light Emitting ◽  
Temperature Changes ◽  
Wide Range ◽  
International Regulations ◽  
Long Lifetime ◽  
Set Up

Nowadays, signal lights are made using light-emitting diode arrays (LEDs). These devices are extremely energy efficient and have a very long lifetime. Unfortunately, especially for yellow/amber LEDs, the intensity of the light is closely related to the junction temperature. This makes it difficult to design signal lights to be used in naval, road, railway, and aeronautical sectors, capable of fully respecting national and international regulations. Furthermore, the limitations prescribed by the standards must be respected in a wide range of temperature variations. In other words, in the signaling apparatuses, a system that varies the light intensity emitted according to the operating temperature is useful/necessary. In this paper, we propose a simple and effective solution. In order to adjust the intensity of the light emitted by the LEDs, we use an LED identical to those used to emit light as a temperature sensor. The proposed system was created and tested in the laboratory. As the same device as the ones to be controlled is used as the temperature sensor, the system is very stable and easy to set up.

scholarly journals LPEATs Tailor Plant Phospholipid Composition through Adjusting Substrate Preferences to Temperature

2021 ◽  
Vol 22 (15) ◽  
pp. 8137
Author(s):  
Sylwia Klińska ◽  
Kamil Demski ◽  
Katarzyna Jasieniecka-Gazarkiewicz ◽  
Antoni Banaś
Keyword(s):  
Growth Regulation ◽  
Phylogenetic Analyses ◽  
Phospholipid Composition ◽  
Expression Ratio ◽  
Temperature Changes ◽  
Substrate Preferences ◽  
Thermal Changes ◽  
Biochemical Evaluation ◽  
Response To Temperature ◽  
Acyl Donors

Acyl-CoA:lysophosphatidylethanolamine acyltransferases (LPEATs) are known as enzymes utilizing acyl-CoAs and lysophospholipids to produce phosphatidylethanolamine. Recently, it has been discovered that they are also involved in the growth regulation of Arabidopsis thaliana. In our study we investigated expression of each Camelina sativa LPEAT isoform and their behavior in response to temperature changes. In order to conduct a more extensive biochemical evaluation we focused both on LPEAT enzymes present in microsomal fractions from C. sativa plant tissues, and on cloned CsLPEAT isoforms expressed in yeast system. Phylogenetic analyses revealed that CsLPEAT1c and CsLPEAT2c originated from Camelina hispida, whereas other isoforms originated from Camelina neglecta. The expression ratio of all CsLPEAT1 isoforms to all CsLPEAT2 isoforms was higher in seeds than in other tissues. The isoforms also displayed divergent substrate specificities in utilization of LPE; CsLPEAT1 preferred 18:1-LPE, whereas CsLPEAT2 preferred 18:2-LPE. Unlike CsLPEAT1, CsLPEAT2 isoforms were specific towards very-long-chain fatty acids. Above all, we discovered that temperature strongly regulates LPEATs activity and substrate specificity towards different acyl donors, making LPEATs sort of a sensor of external thermal changes. We observed the presented findings not only for LPEAT activity in plant-derived microsomal fractions, but also for yeast-expressed individual CsLPEAT isoforms.

Seed germination response of a noxious agricultural weed Echium plantagineum to temperature, light, pH, drought stress, salinity, heat and smoke

2018 ◽  
Vol 69 (3) ◽  
pp. 326 ◽  
Author(s):  
Singarayer Florentine ◽  
Sandra Weller ◽  
Alannah King ◽  
Arunthathy Florentine ◽  
Kim Dowling ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Drought Stress ◽  
Invasive Weed ◽  
Germination Response ◽  
Elevated Salinity ◽  
Wide Range ◽  
Agricultural Weed ◽  
Soil Seedbank ◽  
Response To Temperature ◽  
Salinity Management

Echium plantagineum is a significant pasture weed in the Mediterranean climatic zone of several countries, including Australia. This invasive weed, introduced as an ornamental into Australia (where it is known as Paterson’s curse), quickly became established and is now a significant weed of agriculture. Although E. plantagineum is a well-established, highly competitive weed that thrives under disturbance and is tolerant of a wide variety of conditions, including varying soil moisture and drought, and some aspects of its ecology remain unknown. This study investigated germination response to temperature and light, pH, soil moisture, salinity, and pre-germination exposure of seed to heat and smoke. Temperature was found to be more influential on germination than light and the species is tolerant to a wide range of pH. However, available moisture may limit germination, as may elevated salinity. Management of this weed requires approaches that minimise soil seedbank input or prevent germination of soil seedbanks.

scholarly journals Woody species do not differ in dormancy progression: differences in time to budbreak due to forcing and cold hardiness

2021 ◽  
Author(s):  
Al Kovaleski
Keyword(s):  
Maximum Rate ◽  
Path Length ◽  
Cold Hardiness ◽  
Woody Species ◽  
Two Dimensions ◽  
Spring Phenology ◽  
Wide Range ◽  
The Difference ◽  
Response To Temperature ◽  
Phenological Phases

AbstractBudbreak is one of the most observed and studied phenological phases in perennial plants. Two dimensions of exposure to temperature are generally used to model budbreak: accumulation of time spent at low temperatures (chilling); and accumulation of heat units (forcing). These two effects have a well-established negative correlation: the more chilling, the less forcing required for budbreak. Furthermore, temperate plant species are assumed to vary in amount of chilling required to complete endodormancy and begin the transition to breaking bud. Still, prediction of budbreak remains a challenge. The present work demonstrates across a wide range of species how bud cold hardiness must be accounted for to study dormancy and accurately predict time to budbreak. Cold hardiness defines the path length to budbreak, meaning the difference between the cold hardiness buds attain during the winter, and the cold hardiness at which deacclimated buds are predicted to open. This distance varies among species and throughout winter within a species. Increases in rate of cold hardiness loss (deacclimation) measured throughout winter show that chilling controls deacclimation potential – the proportion of the maximum rate response attained at high chill accumulation – which has a sigmoid relationship to chilling accumulation. For forcing, rates of deacclimation increase non-linearly in response to temperature. Comparisons of deacclimation potential show a dormancy progresses similarly for all species. This observation suggests that comparisons of physiologic and genetic control of dormancy requires an understanding of cold hardiness dynamics and the necessity for an update of the framework for studying dormancy and its effects on spring phenology.

scholarly journals Human Erythrocyte-Like Transformation of Synthetic Polymer Vesicles

2021 ◽  
Author(s):  
Eri Yoshida
Keyword(s):  
Methacrylic Acid ◽  
Human Erythrocyte ◽  
Bilayer Membrane ◽  
Synthetic Polymer ◽  
Butyl Methacrylate ◽  
Temperature Changes ◽  
Polymer Vesicles ◽  
Membrane Perforation ◽  
Response To Temperature ◽  
Spherical Vesicles

Abstract This paper describes that synthetic polymer vesicles undergo a human erythrocyte-like transformation in response to temperature changes. The normally biconcave discoid erythrocytes, i.e., the discocytes, are transformed into various shapes by their environmental stresses. Field emission scanning electron microscopy (FE-SEM) demonstrates that the spherical vesicles consisting of poly(methacrylic acid)-block-poly(n-butyl methacrylate-random-methacrylic acid), PMAA-b-P(BMA-r-MAA), transform into echinocyte-like crenate vesicles due to expansion by the component copolymers in being freed from the vesicle surface when heated in an aqueous methanol solution. An increase in the vesicle concentration transforms the spherical vesicles into stomatocyte-like cup-shaped vesicles via the membrane perforation or double invaginations followed by membrane coupling and fusion. Light scattering studies reveal the reversibility and repeatability of the transformations. These findings indicate that the erythrocyte transformations are attributed to the inherent property of the bilayer membrane. The polymer vesicles are helpful for a better understanding of the biomembrane.

Preparation and Swelling Dynamics Characterization of Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Intelligent Hydrogels

2012 ◽  
Vol 490-495 ◽  
pp. 3382-3386
Author(s):  
Xiao Qi Li ◽  
Nai Yan Zhang ◽  
Jun Hai Zhang
Keyword(s):  
Itaconic Acid ◽  
Monomer Concentration ◽  
Molar Ratio ◽  
Solution Temperature ◽  
Temperature Changes ◽  
Different Temperatures ◽  
Total Monomer Concentration ◽  
Equilibrium Swelling Ratio ◽  
Composition Ratios ◽  
Response To Temperature

Poly(N,N-diethylacrylamide) (PDEA) hydrogel is known for their intelligent reversible swelling/deswelling behavior in response to temperature changes across a lower critical solution temperature (LCST) at around 31oC. In this study, itaconic acid (IA) was co-polymerized with N, N-diethylacrylamide (DEA) monomer to improve the swelling behavior and the total absorbing water. These copolymer hydrogels were prepared by changing the initial DEA/IA molar ratio and total monomer concentration. The chemical structure of hydrogels was characterized by fourier transform infrared (FTIR) spectroscopy. In comparison with the PDEA hydrogel, the equilibrium swelling ratio (ESR) of the hydrogels increase with the increase of IA content in the feed and the swelling dynamics behaviors of the different composition ratios of the P(DEA-co-IA) hydrogels on the different temperatures was investigated in detail.

scholarly journals Climate structuring of Batrachochytrium dendrobatidis infection in the threatened amphibians of the northern Western Ghats, India

2018 ◽  
Vol 5 (6) ◽  
pp. 180211 ◽  
Author(s):  
Christopher J. Thorpe ◽  
Todd R. Lewis ◽  
Matthew C. Fisher ◽  
Claudia J. Wierzbicki ◽  
Siddharth Kulkarni ◽  
...  
Keyword(s):  
Western Ghats ◽  
Batrachochytrium Dendrobatidis ◽  
Coastal Region ◽  
First Record ◽  
Climatic Conditions ◽  
Ecological Traits ◽  
Temperature Changes ◽  
Reverse Pattern ◽  
Wide Range ◽  
The Western Ghats

Batrachochytrium dendrobatidis ( Bd ) is a pathogen killing amphibians worldwide. Its impact across much of Asia is poorly characterized. This study systematically surveyed amphibians for Bd across rocky plateaus in the northern section of the Western Ghats biodiversity hotspot, India, including the first surveys of the plateaus in the coastal region. These ecosystems offer an epidemiological model system since they are characterized by differing levels of connectivity, edaphic and climatic conditions, and anthropogenic stressors. One hundred and eighteen individuals of 21 species of Anura and Apoda on 13 plateaus ranging from 67 to 1179 m above sea level and 15.89 to 17.92° North latitude were sampled. Using qPCR protocols, 79% of species and 27% of individuals tested were positive for Bd . This is the first record of Bd in caecilians in India, the Critically Endangered Xanthophryne tigerina and Endangered Fejervarya cf. sahyadris . Mean site prevalence was 28.15%. Prevalence below the escarpment was 31.2% and 25.4% above. The intensity of infection (GE) showed the reverse pattern. Infection may be related to elevational temperature changes, thermal exclusion, inter-site connectivity and anthropogenic disturbance. Coastal plateaus may be thermal refuges from Bd . Infected amphibians represented a wide range of ecological traits posing interesting questions about transmission routes.

Temperature-induced pupil movements in insect superposition eyes

2000 ◽  
Vol 203 (4) ◽  
pp. 685-692 ◽  
Author(s):  
P. Nordstrom ◽  
E.J. Warrant
Keyword(s):  
High Temperatures ◽  
Cydia Pomonella ◽  
Codling Moth ◽  
Light Level ◽  
Agrotis Segetum ◽  
Effect Of Temperature ◽  
Activation Temperature ◽  
Ambient Light Level ◽  
Wide Range ◽  
Response To Temperature

In this paper, we describe the hitherto largely overlooked effect of temperature on the pupil of insect compound eyes. In the turnip moth Agrotis segetum and in two other nocturnal insects with superposition eyes, the lacewing Euroleon nostras and the codling moth Cydia pomonella, the pupil not only opens and closes with changes in the ambient light level, as expected, but also with changes in temperature in the absence of light. In complete darkness, the pupil of A. segetum responds over a wide range of temperatures, with the pupillary pigments migrating to a light-adapted position when the animal is exposed to either low or high temperatures. At temperatures between 21.0 and 22.7 C, the pigments migrate to the fully dark-adapted position, resulting in an open pupil and maximal eye glow. Pupil closure at high temperatures shows two distinct thresholds: the first at 23.8+/−0.7 C and a second some degrees higher at 25.7+/−1.2 C (means +/− s.d., N=10). Temperatures exceeding the first threshold (the activation temperature, T(a)) initiate a closure of the pupil that is completed when the temperature exceeds the second threshold (the closure temperature, T(c)), which causes rapid and complete migration of pigment to the light-adapted position. All temperatures above T(a) affect the pupil, but only temperatures exceeding T(c) result in complete closure. Temperatures between T(a) and T(c) cause a slow, partial and rather unpredictable closure. The lacewing and the codling moth both show very similar responses to those of A. segetum, suggesting that this response to temperature is widespread in superposition eyes. The possibility that the ambient temperature could be used to pre-adapt the eye to different light intensities is discussed.

The effect of ligand symmetry on the ratiometric luminescence characteristics of lanthanides

2018 ◽  
Vol 47 (19) ◽  
pp. 6779-6786 ◽  
Author(s):  
Yoshinori Okayasu ◽  
Hajime Kamebuchi ◽  
Junpei Yuasa
Keyword(s):  
Temperature Changes ◽  
Spectral Changes ◽  
Response To Temperature ◽  
Luminescence Characteristics

Nona-coordinated europium(iii) complexes incorporating unsymmetrical β-diketonate ligands exhibit distinctive ratiometric spectral changes within the extremely narrow f–f transition bands in response to temperature changes over the range from 253 to 323 K.

scholarly journals AirClim: an efficient tool for climate evaluation of aircraft technology

2008 ◽  
Vol 8 (16) ◽  
pp. 4621-4639 ◽  
Author(s):  
V. Grewe ◽  
A. Stenke
Keyword(s):  
Climate Change ◽  
Water Vapour ◽  
Radiative Forcing ◽  
Climate Impacts ◽  
Assessment Tools ◽  
Surface Temperature Change ◽  
Near Surface ◽  
Temperature Changes ◽  
Wide Range ◽  
Concentration Changes

Abstract. Climate change is a challenge to society and to cope with requires assessment tools which are suitable to evaluate new technology options with respect to their impact on global climate. Here we present AirClim, a model which comprises a linearisation of atmospheric processes from the emission to radiative forcing, resulting in an estimate in near surface temperature change, which is presumed to be a reasonable indicator for climate change. The model is designed to be applicable to aircraft technology, i.e. the climate agents CO2, H2O, CH4 and O3 (latter two resulting from NOx-emissions) and contrails are taken into account. AirClim combines a number of precalculated atmospheric data with aircraft emission data to obtain the temporal evolution of atmospheric concentration changes, radiative forcing and temperature changes. These precalculated data are derived from 25 steady-state simulations for the year 2050 with the climate-chemistry model E39/C, prescribing normalised emissions of nitrogen oxides and water vapour at various atmospheric regions. The results show that strongest climate impacts (year 2100) from ozone changes occur for emissions in the tropical upper troposphere (60 mW/m2; 80 mK for 1 TgN/year emitted) and from methane changes from emissions in the middle tropical troposphere (−2.7% change in methane lifetime; –30 mK per TgN/year). For short-lived species (e.g. ozone, water vapour, methane) individual perturbation lifetimes are derived depending on the region of emission. A comparison of this linearisation approach with results from a comprehensive climate-chemistry model shows reasonable agreement with respect to concentration changes, radiative forcing, and temperature changes. For example, the total impact of a supersonic fleet on radiative forcing (mainly water vapour) is reproduced within 10%. A wide range of application is demonstrated.

Sign in / Sign up

Export Citation Format

Share Document