Dietary Protein Requirements of Fishes — A Reassessment

1987 ◽  
Vol 44 (11) ◽  
pp. 1995-2001 ◽  
Author(s):  
Stephen H. Bowen
Keyword(s):  
Growth Rate ◽  
Dietary Protein ◽  
Protein Concentration ◽  
Trophic Ecology ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Intake Rate ◽  
Protein Requirement ◽  
Fish Physiology ◽  
Protein Retention

It is widely believed that fishes require more dietary protein than other vertebrates. Many aspects of fish physiology, nutrition, and trophic ecology have been interpreted within the context of this high protein requirement. Here, fishes are compared with terrestrial homeotherms in terms of (1) protein requirement for maintenance, (2) relative protein concentration in the diet required for maximum growth rate, (3) protein intake rate required for maximum growth rate, (4) efficiency of protein retention in growth, and (5) weight of growth achieved per weight of protein ingested. The two animal groups compared differ only in relative protein concentration in the diet required for maximum growth rate. This difference is explained in terms of homeotherms' greater requirement for energy and does not reflect absolute differences in protein requirement. The remaining measures of protein requirement suggest that fishes and terrestrial homeotherms are remarkably similar in their use of protein as a nutritional resource. Reinterpretation of the role of protein in fish physiology, nutrition, and trophic ecology is perhaps in order.

scholarly journals Effects of index selection on the performance and carcass composition of sheep given foods of different protein concentrationsad libitum

2004 ◽  
Vol 78 (2) ◽  
pp. 203-212 ◽  
Author(s):  
R. M. Lewis ◽  
G. C. Emmans ◽  
G. Simm
Keyword(s):  
Growth Rate ◽  
Dietary Protein ◽  
Protein Concentration ◽  
Live Weight ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Carcass Composition ◽  
Control Line ◽  
Wide Range ◽  
Males And Females

AbstractSheep of a line selected on an index to increase carcass lean content at 150 days of age (selected (S); no. = 90), and an unselected control line (control (C); no. = 90), were given ad libitum foods of three different protein concentrations (192, 141 and 120 g/kg dry matter). Growth was measured from about 21 to 114 kg live weight. The carcasses of each line were analysed for lean, fat and bone at three widely varying weights in both males and females. Level of protein did not affect the extent to which S was superior to C in the content of fat (0.86 as much) or lean (1.08 as much) in the carcass. The fat concentration of the carcass increased, and the lean concentration decreased, as dietary protein concentration was reduced (P < 0.01). On the highest level of protein used, the S line grew 1.17 times as fast and was 1.10 times as efficient compared with C. The extent to which growth rate in S exceeded that in C was greater on the highest level of protein used (92.3 g/day) than on the two lower protein diets (26.4 g/day). The difference of 65.9 (s.e. 18.4) g/day was significant (P < 0.01). On the diet of highest protein concentration, growth was well described by a Gompertz function. The S line had an estimated maximum growth rate 1.25 times that of the C when averaged across males and females. A Spillman function was used to describe weight in terms of cumulative intake. It worked well for all three levels of dietary protein concentration. S sheep performed better than unselected sheep on foods differing in protein concentration and over a wide range of live weights, suggesting benefits are likely within the diverse farming environments found in practice.

A note on growth curves of rabbit lines selected on growth rate or litter size

1993 ◽  
Vol 57 (2) ◽  
pp. 332-334 ◽  
Author(s):  
A. Blasco ◽  
E. Gómez
Keyword(s):  
Growth Rate ◽  
Litter Size ◽  
Growth Curves ◽  
Live Weight ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Standard Errors ◽  
Adult Weight ◽  
Weight Growth ◽  
Using Data

Two synthetic lines of rabbits were used in the experiment. Line V, selected on litter size, and line R, selected on growth rate. Ninety-six animals were randomly collected from 48 litters, taking a male and a female each time. Richards and Gompertz growth curves were fitted. Sexual dimorphism appeared in the line V but not in the R. Values for b and k were similar in all curves. Maximum growth rate took place in weeks 7 to 8. A break due to weaning could be observed in weeks 4 to 5. Although there is a remarkable similarity of the values of all the parameters using data from the first 20 weeks only, the higher standard errors on adult weight would make 30 weeks the preferable time to take data for live-weight growth curves.

Reassessment of Maximum Growth Rates for C3 and C4 Crops

1978 ◽  
Vol 14 (1) ◽  
pp. 1-5 ◽  
Author(s):  
J. L. Monteith
Keyword(s):  
Growth Rate ◽  
Growth Rates ◽  
Growing Season ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Crop Growth ◽  
Close Inspection ◽  
Similar Difference ◽  
Photosynthetic Efficiencies

SUMMARYFigures for maximum crop growth rates, reviewed by Gifford (1974), suggest that the productivity of C3 and C4 species is almost indistinguishable. However, close inspection of these figures at source and correspondence with several authors revealed a number of errors. When all unreliable figures were discarded, the maximum growth rate for C3 stands fell in the range 34–39 g m−2 d−1 compared with 50–54 g m−2 d−1 for C4 stands. Maximum growth rates averaged over the whole growing season showed a similar difference: 13 g m−2 d−1 for C3 and 22 g m−2 d−1 for C4. These figures correspond to photosynthetic efficiencies of approximately 1·4 and 2·0%.

Interpretation of Experimental Data with Regard to the Activated Sludge Model No.1 and Calibration of the Model for Municipal Wastewater Treatment Plants

1992 ◽  
Vol 25 (6) ◽  
pp. 167-183 ◽  
Author(s):  
H. Siegrist ◽  
M. Tschui
Keyword(s):  
Experimental Data ◽  
Growth Rate ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Municipal Wastewater Treatment ◽  
Activated Sludge Model

The wastewater of the municipal treatment plants Zürich-Werdhölzli (350000 population equivalents), Zürich-Glatt (110000), and Wattwil (20000) have been characterized with regard to the activated sludge model Nr.1 of the IAWPRC task group. Zürich-Glatt and Wattwil are partly nitrifying treatment plants and Zürich-Werdhölzli is fully nitrifying. The mixing characteristics of the aeration tanks at Werdhölzli and Glatt were determined with sodium bromide as a tracer. The experimental data were used to calibrate hydrolysis, heterotrophic growth and nitrification. Problems arising by calibrating hydrolysis of the paniculate material and by measuring oxygen consumption of heterotrophic and nitrifying microorganisms are discussed. For hydrolysis the experimental data indicate first-order kinetics. For nitrification a maximum growth rate of 0.40±0.07 d−1, corresponding to an observed growth rate of 0.26±0.04 d−1 was calculated at 10°C. The half velocity constant found for 12 and 20°C was 2 mg NH4-N/l. The calibrated model was verified with experimental dam of me Zürich-Werdhölzli treatment plant during ammonia shock load.

Allometric scaling and taxonomic variation in nutrient utilization traits and maximum growth rate of phytoplankton

2012 ◽  
Vol 57 (2) ◽  
pp. 554-566 ◽  
Author(s):  
Kyle F. Edwards ◽  
Mridul K. Thomas ◽  
Christopher A. Klausmeier ◽  
Elena Litchman
Keyword(s):  
Growth Rate ◽  
Allometric Scaling ◽  
Maximum Growth ◽  
Nutrient Utilization ◽  
Maximum Growth Rate

Instability waves on the air–sea interface

1993 ◽  
Vol 248 ◽  
pp. 363-381 ◽  
Author(s):  
G. H. Wheless ◽  
G. T. Csanady
Keyword(s):  
Surface Tension ◽  
Growth Rate ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Surface Velocity ◽  
Instability Waves ◽  
Interface Surface ◽  
Fluid Properties ◽  
Compound Matrix Method ◽  
Order Of Magnitude

We used a compound matrix method to integrate the Orr–Sommerfeld equation in an investigation of short instability waves (λ < 6 cm) on the coupled shear flow at the air–sea interface under suddenly imposed wind (a gust model). The method is robust and fast, so that the effects of external variables on growth rate could easily be explored. As expected from past theoretical studies, the growth rate proved sensitive to air and water viscosity, and to the curvature of the air velocity profile very close to the interface. Surface tension had less influence, growth rate increasing somewhat with decreasing surface tension. Maximum growth rate and minimum wave speed nearly coincided for some combinations of fluid properties, but not for others.The most important new finding is that, contrary to some past order of magnitude estimates made on theoretical grounds, the eigenfunctions at these short wavelengths are confined to a distance of the order of the viscous wave boundary-layer thickness from the interface. Correspondingly, the perturbation vorticity is high, the streamwise surface velocity perturbation in typical cases being five times the orbital velocity of free waves on an undisturbed water surface. The instability waves should therefore be thought of as fundamentally different flow structures from free waves: given their high vorticity, they are akin to incipient turbulent eddies. They may also be expected to break at a much lower steepness than free waves.

scholarly journals Economics Research Output in BRICS Countries: A Scientometric Dimension

2019 ◽  
Vol 9 (1) ◽  
pp. 14-21
Author(s):  
Kiran P. Savanur
Keyword(s):  
Growth Rate ◽  
Web Of Science ◽  
Research Output ◽  
Activity Index ◽  
Citation Impact ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Economic Research ◽  
Brics Countries ◽  
Economics Research

This article examines the research output of economics published by BRICS countries during 1991-2016. Data collected from the Web of Science database. Growth rate (CAGR), Collaboration index, Transformative Activity index (TAI), Co-authorship index and Relative Citation Impact (RCI) indicators have been adopted to analyze the quantity and impact of economic research. We found that all five BRICS countries contributed approximately 10 percentile of the world’s economics research. The highest contribution was made by China with a total of 4424 articles which is 40.59 percent. Russia has the maximum growth rate of 27.99. Overall collaboration rate of economics publications of BRICS countries is moderate.

scholarly journals Efficacy of Experimental Mouth Rinses on Caries-Related Biofilms in vitro

2021 ◽  
Vol 2 ◽  
Author(s):  
Josiana Steiger ◽  
Olivier Braissant ◽  
Tuomas Waltimo ◽  
Monika Astasov-Frauenhoffer
Keyword(s):  
Growth Rate ◽  
Antimicrobial Agents ◽  
Growth Parameters ◽  
Screening Method ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Screening Process ◽  
Mouth Rinses ◽  
Amine Fluoride

This study assessed the efficacy of tin and Polyethylenglycol (PEG-3) tallow aminopropylamine in different concentrations on Streptococcus mutans (S. mutans) biofilms to establish a new screening process for different antimicrobial agents and to gain more information on the antibacterial effects of these agents on cariogenic biofilms. Isothermal microcalorimetry (IMC) was used to determine differences in two growth parameters: lag time and growth rate; additionally, reduction in active biofilms was calculated. Experimental mouth rinses with 400 and 800 ppm tin derived from stannous fluoride (SnF2) revealed results (43.4 and 49.9% active biofilm reduction, respectively) similar to meridol mouth rinse (400 ppm tin combined with 1,567 ppm PEG-3 tallow aminopropylamine; 55.3% active biofilm reduction) (p &gt; 0.05), while no growth of S. mutans biofilms was detected during 72 h for samples treated with an experimental rinse containing 1,600 ppm tin (100% active biofilm reduction). Only the highest concentration (12,536 ppm) of rinses containing PEG-3 tallow aminopropylamine derived from amine fluoride (AmF) revealed comparable results to meridol (57.5% reduction in active biofilm). Lower concentrations of PEG-3 tallow aminopropylamine showed reductions of 16.9% for 3,134 ppm and 33.5% for 6,268 ppm. Maximum growth rate was significantly lower for all the samples containing SnF2 than for the samples containing control biofilms (p &lt; 0.05); no differences were found between the control and all the PEG-3 tallow aminopropylamine (p &gt; 0.05). The growth parameters showed high reproducibility rates within the treated groups of biofilms and for the controls; thus, the screening method provided reliable results.

scholarly journals Information and Computer Technology (ICT) in Indian Banking System after Computerization

2020 ◽  
Vol 8 (4S) ◽  
pp. 62-64
Keyword(s):  
Growth Rate ◽  
Computer Technology ◽  
Banking Sector ◽  
Banking System ◽  
Maximum Growth ◽  
Maximum Growth Rate ◽  
Great Change ◽  
Maximum Profit ◽  
Information And Computer Technology ◽  
Economy System

In Indian economy system, banking sector has an important role and after computerization, there is a great change came in it. In India, Now there are a lot of branches of banks. At present, banking sectors face a tough competition. Maximum growth rate are shown by those banks which have maximum profit. By the use of various technologies, banks cost may become minimum and profit may become maximum. In this manuscript, the effect has been studied on the banks after computerization. The effects are analyzed after use of information and computer technology in Indian banking systems after computerization. The selected banks for this study are SBI, PNB and UBI.

Sign in / Sign up

Export Citation Format

Share Document