Laboratory evaluation on the high temperature rheological properties of rubber asphalt: a preliminary study

2012 ◽  
Vol 39 (10) ◽  
pp. 1125-1135 ◽  
Author(s):  
Hainian Wang ◽  
Zhanping You ◽  
Shu Wei Goh ◽  
Peiwen Hao ◽  
Xiaoming Huang
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Rubber Particle ◽  
Asphalt Binder ◽  
Field Performance ◽  
Crumb Rubber ◽  
Testing Temperature ◽  
Asphalt Mixtures ◽  
Laboratory Evaluation ◽  
Loading Frequency

Crumb rubber is the recycled rubber particle obtained from mechanical shearing or grinding scrap tires into small particle sizes less than 6.3 mm (or approximately 1/4”). The rheological properties of asphalt binder have an important effect on the field performance of asphalt mixtures and the long-term serviceability of asphalt pavement. The objective of this research is to evaluate the high temperature rheological performance of rubber asphalt binder based on the complex shear modulus (|G*|) and the phase angle (δ) values using the dynamic shear rheometer. Five rubber asphalt dosages at 0, 10, 15, 20, and 25% by weight of asphalt (Superpave PG 64-22), respectively, were used to modify asphalt binder; and three rubber particle meshes, 20#, 30#, and 40#, were utilized in this research. The |G*| at various temperatures and frequencies were tested on each sample, including original and short-term aging binder using the rolling thin-film over. The master curves of |G*|/sin(δ) for each type of rubber asphalt was generated to investigate its rheological properties over a broad range of temperatures and frequencies. Based on the testing results, it was found that the addition of crumb rubber significantly increases the |G*| of asphalt binder, which is desirable to potentially improve the anti-rutting performance of asphalt mixtures. It was also found that the addition of 10% mesh crumb rubbers bumps up the high temperature grade of asphalt, from PG64 to PG76 in this case. The master curve using the |G*|/sin(δ) of rubber asphalt shows a substantial improvement in rutting resistant at each testing temperature and loading frequency. However, it was noteworthy that the rutting resistance enhancement of crumb rubber was affected by the percentage of rubber used, the rubber particle size and its aging condition.

scholarly journals Characterization of asphalt binders extracted from field mixtures containing RAP and/or RAS

2022 ◽  
Vol 13 (1) ◽  
pp. 140-152
Author(s):  
Eslam Deef-Allah ◽  
Magdy Abdelrahman
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Multiple Stress Creep Recovery ◽  
Pavement Construction

The use of reclaimed asphalt pavement (RAP) and/or recycled asphalt shingles (RAS) in the asphalt mixtures is a common practice in the U.S.A. However, there is a controversy to date on how RAP/RAS interact with virgin asphalt binders (VABs) in asphalt mixtures. For mixtures containing RAP/RAS, the aged asphalt binders in RAP and air-blown asphalt binders in RAS alter the performances of the extracted asphalt binders (EABs). Thus, the rheological properties of EABs from these mixtures require more investigation. The focus of this paper was relating the high-temperature properties of EABs from field cores to the corresponding rolling thin film oven aged virgin asphalt binders (RTFO AVABs). Furthermore, a comparison of the effect of RAP and RAS on the high-temperature rheological properties of EABs was another objective. Different asphalt cores were collected from the field within two weeks after the pavement construction process in 2016. These cores represented eight asphalt mixtures with different asphalt binder replacement percentages by RAP, RAS, or both. The asphalt binders were extracted from these mixtures and considered as RTFO AVABs. The high-temperature rheological properties included the temperature sweep and frequency sweep testing and the multiple stress creep recovery testing. The EABs had higher stiffnesses and elasticates than the corresponding RTFO AVABs because of the aged binders in RAP/RAS. The binders in RAP interacted more readily with VABs than RAS binders.

scholarly journals Evaluation of Micro-Mechanism and High- and Low-Temperature Rheological Properties of Disintegrated High Volume Crumb Rubber Asphalt (DHVRA)

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1145
Author(s):  
Wei Li ◽  
Sen Han ◽  
Xiaokang Fu ◽  
Ke Huang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Particle Diameter ◽  
Gel Permeation Chromatography ◽  
High Volume ◽  
Crumb Rubber ◽  
Test Method ◽  
Polar Component ◽  
Temperature Performance

The aims of this paper are to prepare disintegrated high volume crumb rubber asphalt (DHVRA) with low viscosity, good workability and low-temperature performance by adding disintegrating agent (DA) in the preparation process, and to further analyze the disintegrating mechanism and evaluated high-temperature and low-temperature rheological properties. To obtain DHVRA with excellent comprehensive performance, the optimum DA dosage was determined. Based on long-term disintegrating tests and the Fluorescence Microscopy (FM) method, the correlations between key indexes and crumb rubber (CR) particle diameter was analyzed, and the evaluation indicator and disintegrating stage division standard were put forward. Furthermore, Fourier transform infrared spectroscopy (FT-IR) and Gel Permeation Chromatography (GPC) was used to reveal the reaction mechanism, and the contact angle test method was adopted to evaluate the surface free energy (SFE). In addition, the high-temperature and low-temperature rheological properties were measured, and the optimum CR content was proposed. Results indicated that the optimum DA dosage was 7.5‰, and the addition of DA promoted the melt decomposition of CR, reduced the viscosity and improved the storage stability. The 135 °C rotational viscosity (RV) of DHVRA from mixing for 3 h could be reduced to 1.475 Pa·s, and the softening point difference was even less than 2 °C. The linear correlation between 135 °C RV and the diameter of CR particle in rubber asphalt system was as high as 0.968, and the viscosity decay rate (VDR) was used as the standard to divide the disintegrating process into a fast disintegrating stage, stable disintegrating stage and slight disintegrating stage. Compared to common rubber asphalt (CRA), DHVRA has an absorption peak at 960 cm−1 caused by trans olefin = C-H, and higher molecular weight and polar component of surface energy. Compared with CRA, although the high-temperature performance of DHVRA decreases slightly, the low-temperature relaxation ability can be greatly improved.

scholarly journals Linking the Effect of Aggregate Interaction to the Compaction Theory for Asphalt Mixtures Using Image Processing

2018 ◽  
Vol 8 (11) ◽  
pp. 2045 ◽  
Author(s):  
Kyoungchul Kim ◽  
Myungook Kang
Keyword(s):  
Image Processing ◽  
High Temperature ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Energy Index ◽  
Optimum Temperature ◽  
Frictional Behavior ◽  
Viscosity Effect ◽  
Frictional Interaction ◽  
Compaction Energy

This study presents a modified compaction concept of asphalt mixtures based on aggregate frictional behavior using self-developed image processing for measuring the aggregate orientation. The compaction energy index was introduced to evaluate the aggregate orientation on different compaction temperatures. For the better rearrangement of aggregates, there was an optimum temperature at which a preferred orientation exists, providing lower compaction efforts. An excessively high temperature reduced the asphalt contents for lubrication and caused additional aggregate friction to require higher compaction efforts. This phenomenon can be found in the changes of the volume of the effective asphalt binder (Veac) and the absorbed asphalt binder (Pba). The mixture produced higher Veac, at which an optimum compaction temperature required lower compaction energy. Despite being higher than the optimum temperature for the PG62-28 mixture, the Veac decreased by 0.4%. An increase of 0.35% in the Pba was inferred to flow into the aggregates. Clearly, a reduction of lubricant in the mixture caused a higher frictional interaction between aggregates. Changes in the Veac and the Pba can eliminate the viscosity effect for the rearrangement of aggregates. Based on the aggregate orientation and change in mixture volumetrics, the aggregate interaction effect was introduced to the Mohr–Coulomb compaction theory to explain the additional friction.

scholarly journals Laboratory Evaluation of Asphalt Binder Modified with Crumb Rubber and Basalt Fiber

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Li Liu ◽  
You Huang ◽  
Zhaohui Liu
Keyword(s):  
Shear Strength ◽  
Low Temperature ◽  
Complex Modulus ◽  
Heavy Traffic ◽  
Asphalt Binder ◽  
Basalt Fiber ◽  
Crumb Rubber ◽  
Traffic Load ◽  
Laboratory Evaluation ◽  
Temperature Property

Asphalt pavement subjected to heavy traffic load and harsh environmental conditions can easily build up damage and shorten the service life. In this paper, different dosages of basalt fiber (BF) were introduced into crumb rubber (CR) modified asphalt binder, and a series of laboratory tests were carried out to evaluate the properties and performances. A dynamic shear rheometer (DSR) was employed to evaluate viscosity and rheological properties. Bending beam rheometer (BBR) test and direct tensile test (DTT) were conducted to test the low temperature property. Cone penetration was designed to test shear strength. Results show that the optimum content of BF is 0.3% by the weight of asphalt binder based on the overall performance evaluation. Viscosity, complex modulus, fatigue property, rutting resistance, and shear strength are improved by introducing BF into asphalt binder. Stiffness and elasticity are also increased. BBR indicates that ductility at low temperature is reduced a little by the presence of BF, but DTT shows that both tensile strength and elongation are improved by BF. Considering that DTT is more performance related, DTT is preferred over BBR to evaluate cracking potentials at low temperatures of asphalt binder modified with CR and BF. Finally, it is revealed through microscale scanning that three mechanisms, absorption of asphalt binder, 3-dimensional fiber network, and bridging effects, contribute to the performance improvement of asphalt binder modified with CR and BF.

scholarly journals Experimental Study to Determine the Most Preferred Additive for Improving Asphalt Performance Using Polypropylene, Crumb Rubber, and Tafpack Super in Medium and High-Temperature Range

2019 ◽  
Vol 9 (8) ◽  
pp. 1567 ◽  
Author(s):  
Huang Xiaoming ◽  
Ismail Bakheit Eldouma
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Mechanical Performance ◽  
Asphalt Binder ◽  
Crumb Rubber ◽  
Asphalt Binders ◽  
Modified Bitumen ◽  
Asphalt Modification ◽  
Rotational Viscosity ◽  
Asphalt Performance

The overall objectives of this study were to determine the most appropriate additive for improving the physical properties and the medium- and high-temperature performances (mechanical performance) of asphalt binders. Three different types of modified binders were prepared: crumb rubber modifier (CRM), polypropylene (PP), and tafpack super (TPS), which had concentrations of 2%, 3%, 3.5%, and 4% by weight of asphalt binder, for each modifier. Their physical and rheological properties were evaluated by applying various tests such as ductility, rotational viscosity, toughness, and tenacity, as well as the dynamic shear rheometer (DSR) test. As a result, the physical properties of the modified bitumen binders were compared, as were the medium- and high-temperature performances (mechanical performance), which had temperatures of 58, 64, 70, 76, 82, and 88 °C, respectively. This was how the most appropriate modifier was determined. The results demonstrated that the asphalt binder properties significantly improved by utilizing CRM followed by PP and TPS modifiers. The increase in the rutting parameter (G*/sin(δ)) after asphalt modification indicated its excellent performance at both medium- and high-temperatures. Lastly, the CRM was determined as the most preferred additive because of its positive effect on the physical properties and enhancement of the medium- and high-temperature performance (mechanical performance).

scholarly journals Effect of Recycled Shell Waste as a Modifier on the High- and Low-Temperature Rheological Properties of Asphalt

2021 ◽  
Vol 13 (18) ◽  
pp. 10271
Author(s):  
Yuchen Guo ◽  
Xuancang Wang ◽  
Guanyu Ji ◽  
Yi Zhang ◽  
Hao Su ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Low Temperatures ◽  
High Speed ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Modified Asphalt ◽  
Temperature Performance

The deteriorating ecological environment and the concept of sustainable development have highlighted the importance of waste reuse. This article investigates the performance changes resulting from the incorporation of shellac into asphalt binders. Seashell powder-modified asphalt was prepared with 5%, 10%, and 15% admixture using the high-speed shear method. The microstructure of the seashell powder was observed by scanning electron microscope test (SEM); the physical-phase analysis of the seashell powder was carried out using an X-ray diffraction (XRD) test; the surface characteristics and pore structure of shellac were analyzed by the specific surface area Brunauer-Emmett-Teller (BET) test; and Fourier infrared spectroscopy (FTIR) qualitatively analyzed the composition and changes of functional groups of seashell powder-modified asphalt. The conventional performance index of seashell powder asphalt was analyzed by penetration, softening point, and ductility (5 °C) tests; the effect of seashell powder on asphalt binder was studied using a dynamic shear rheometer (DSR) and bending beam rheometer (BBR) at high and low temperatures, respectively. The results indicate the following: seashell powder is a coarse, porous, and angular CaCO3 bio-material; seashell powder and the asphalt binder represent a stable physical mixture of modified properties; seashell powder improves the consistency, hardness, and high-temperature performance of the asphalt binder but weakens the low-temperature performance of it; seashell powder enhances the elasticity, recovery performance, and permanent deformation resistance of asphalt binders and improves high-temperature rheological properties; finally, seashell powder has a minimal effect on the crack resistance of asphalt binders at very low temperatures. In summary, the use of waste seashells for recycling as bio-modifiers for asphalt binders is a practical approach.

Sign in / Sign up

Export Citation Format

Share Document