Particulate glycogen of mammalian liver: specificity in binding phosphorylase and glycogen synthase

1992 ◽  
Vol 70 (7) ◽  
pp. 523-527 ◽  
Author(s):  
Alexander Vardanis
Keyword(s):  
Molecular Weight ◽  
High Performance ◽  
Glycogen Phosphorylase ◽  
Hydrophobic Interactions ◽  
Glycogen Synthase ◽  
Early Period ◽  
Glycogen Particle ◽  
Molecular Weights ◽  
Glycogen Deposition ◽  
A Minor

The glycogen particle – glycogen metabolizing enzyme complex was investigated to gain some understanding of its physiological significance. Fractionations of populations of particles from mouse liver were carried out utilising open column and high performance liquid chromatography, and based either on the molecular weight of the particles or the hydrophobic interactions of the glycogen-associated proteins. The activities of glycogen phosphorylase and glycogen synthase were measured in these fractions. Fractionations were of tissue in different stages of glycogen deposition or mobilization. In animals fed ad libitum, glycogen synthase was associated with the whole spectrum of molecular weights, while the glycogen phosphorylase distribution was skewed in favour of the lower molecular weight species. Under conditions of glycogen mobilization, the phosphorylase distribution changed to include all molecular weights. The hydrophobic interaction separations demonstrated that glycogen synthase binds to a specific subpopulation of particles that is a minor proportion of the total. In general, there was a direct relationship of the total amount of phosphorylase and synthase bound during periods of mobilization and deposition, respectively. Two notable exceptions were the large amounts of glucose-6-P dependent synthase present during the early period of glycogen mobilization and the high amounts of active phosphorylase appearing shortly after food withdrawal, in spite of interim glycogen deposition from presumably already ingested food.Key words: glycogen particle, glycogenolysis, glycogenesis, glycogen phosphorylase, glycogen synthase.

scholarly journals Effects of Molecular Weight of Functionalized Liquid Butadiene Rubber as a Processing Aid on the Properties of SSBR/Silica Compounds

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 850
Author(s):  
Donghyuk Kim ◽  
Byungkyu Ahn ◽  
Kihyun Kim ◽  
JongYeop Lee ◽  
Il Jin Kim ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Anionic Polymerization ◽  
High Performance ◽  
Crosslink Density ◽  
Functional Group ◽  
Vital Role ◽  
Butadiene Rubber ◽  
Molecular Weights ◽  
Mooney Viscosity ◽  
Silica Dispersion

Liquid butadiene rubber (LqBR) which used as a processing aid play a vital role in the manufacturing of high-performance tire tread compounds. However, the studies on the effect of molecular weight, microstructure, and functionalization of LqBR on the properties of compounds are still insufficient. In this study, non-functionalized and center-functionalized liquid butadiene rubbers (N-LqBR and C-LqBR modified with ethoxysilyl group, respectively) were synthesized with low vinyl content and different molecular weights using anionic polymerization. In addition, LqBR was added to the silica-filled SSBR compounds as an alternative to treated distillate aromatic extract (TDAE) oil, and the effect of molecular weight and functionalization on the properties of the silica-filled SSBR compound was examined. C-LqBR showed a low Payne effect and Mooney viscosity because of improved silica dispersion due to the ethoxysilyl functional group. Furthermore, C-LqBR showed an increased crosslink density, improved mechanical properties, and reduced organic matter extraction compared to the N-LqBR compound. LqBR reduced the glass transition temperature (Tg) of the compound significantly, thereby improving snow traction and abrasion resistance compared to TDAE oil. Furthermore, the energy loss characteristics revealed that the hysteresis loss attributable to the free chain ends of LqBR was dominant.

Comparison of exopolysaccharides from mucoid and nonmucoid strains of Clavibacter michiganensis subspecies sepedonicus

1993 ◽  
Vol 39 (3) ◽  
pp. 291-296 ◽  
Author(s):  
Paul J. Henningson ◽  
Neil C. Gudmestad
Keyword(s):  
Molecular Weight ◽  
High Performance ◽  
Size Exclusion ◽  
Enzyme Linked Immunosorbent Assay ◽  
Low Molecular Weight ◽  
Neutral Sugar ◽  
Clavibacter Michiganensis ◽  
Serological Reaction ◽  
Molecular Weights ◽  
Exclusion Chromatography

The exopolysaccharides produced by six strains of Clavibacter michiganensis ssp. sepedonicus were isolated and purified by liquid chromatography. Neutral sugar composition and molecular weights were determined for each polysaccharide fraction, using gas chromatography and high-performance size-exclusion chromatography. The serological reaction of each fraction was tested using enzyme-linked immunosorbent assay. Exopolysaccharide from nonmucoid strains contained only low molecular weight polysaccharides (1.5 × 103 to 1.1 × 104). Exopolysaccharide from mucoid and intermediate strains could be separated into low (4.0 × 103 to 1.1 × 104) molecular weight and high (5.0 × 105 to 1.6 × 106) molecular weight fractions. High molecular weight polysaccharides were composed almost exclusively of galactose, glucose, and fucose. The ratios of these sugars were highly variable among strains. Low molecular weight polysaccharides were primarily composed of galactose with significant and varying amounts of glucose, rhamnose, mannose, and ribose. All polysaccharide fractions except one, produced by a nonmucoid strain, reacted in the immunoassay test.Key words: exopolysaccharide, polysaccharide, Clavibacter, michiganensis, sepedonicus.

scholarly journals Sedimentation-equilibrium studies on the heterogeneity of two β-lactamases

1970 ◽  
Vol 118 (3) ◽  
pp. 467-474 ◽  
Author(s):  
P. H. Lloyd ◽  
A. R. Peacocke
Keyword(s):  
Molecular Weight ◽  
Diffusion Coefficients ◽  
Minor Component ◽  
Theoretical Solution ◽  
Sedimentation Equilibrium ◽  
Equilibrium Studies ◽  
Molecular Weights ◽  
A Minor

Solutions of crystalline β-lactamase I and β-lactamase II, prepared by Kuwabara (1970), were examined in the ultracentrifuge and their sedimentation coefficients, diffusion coefficients, molecular weights and heterogeneity determined. Each sample was shown to consist of a major component comprising at least 97% of the material and a minor component of much higher molecular weight. The molecular weights of the major components were 27800 for β-lactamase I and 35600 for β-lactamase II. Emphasis is placed on a straightforward practical way of analysing the sedimentation-equilibrium results on mixtures of two macromolecular components rather than on a strict theoretical solution. Appendices describe the theory of systems at both chemical and sedimentation equilibrium and the procedure for calculating the combined distribution of two components.

scholarly journals Preparation of High Molecular Weight Poly(urethane-urea)s Bearing Deactivated Diamines

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1914
Author(s):  
Alejandra Rubio Hernández-Sampelayo ◽  
Rodrigo Navarro ◽  
Ángel Marcos-Fernández
Keyword(s):  
Molecular Weight ◽  
Experimental Work ◽  
High Performance ◽  
Polymerization Reaction ◽  
Quantum Mechanical ◽  
Synthetic Approach ◽  
Molecular Weights ◽  
Mechanical Methods ◽  
Electronic Parameters ◽  
High Molecular Weight Poly

The synthesis of poly(urethane-urea) (PUUs) bearing deactivated diamines within the backbone polymer chain is presented. Several deactivated diamines present interesting properties for several applications in the biomaterial field due to their attractive biocompatibility. Through an activation with Chloro-(trimethyl)silane (Cl-TMS) during the polymerization reaction, the reactivity of these diamines against diisocyanates was triggered, leading to PUUs with high performance. Indeed, through this activation protocol, the obtained molecular weights and mechanical features increased considerably respect to PUUs prepared following the standard conditions. In addition, to demonstrate the feasibility and versatility of this synthetic approach, diisocyanate with different reactivity were also addressed. The experimental work is supported by calculations of the electronic parameters of diisocyanate and diamines, using quantum mechanical methods.

scholarly journals Regulation of glycogen synthase and phosphorylase during recovery from high-intensity exercise in the rat

1997 ◽  
Vol 322 (1) ◽  
pp. 303-308 ◽  
Author(s):  
Lambert BRÄU ◽  
Luis D. M. C. B. FERREIRA ◽  
Sasha NIKOLOVSKI ◽  
Ghazala RAJA ◽  
T. Norman PALMER ◽  
...  
Keyword(s):  
Soleus Muscle ◽  
High Intensity ◽  
Glycogen Phosphorylase ◽  
Glycogen Synthase ◽  
High Intensity Exercise ◽  
Phosphorylation State ◽  
Activity Ratios ◽  
Glycogen Repletion ◽  
Glycogen Deposition ◽  
Gastrocnemius Muscles

The aim of this study was to determine the role of the phosphorylation state of glycogen synthase and glycogen phosphorylase in the regulation of muscle glycogen repletion in fasted animals recovering from high-intensity exercise. Groups of rats were swum to exhaustion and allowed to recover for up to 120 min without access to food. Swimming to exhaustion caused substantial glycogen breakdown and lactate accumulation in the red, white and mixed gastrocnemius muscles, whereas the glycogen content in the soleus muscle remained stable. During the first 40 min of recovery, significant repletion of glycogen occurred in all muscles examined except the soleus muscle. At the onset of recovery, the activity ratios and fractional velocities of glycogen synthase in the red, white and mixed gastrocnemius muscles were higher than basal, but returned to pre-exercise levels within 20 min after exercise. In contrast, after exercise the activity ratios of glycogen phosphorylase in the same muscles were lower than basal, and increased to pre-exercise levels within 20 min. This pattern of changes in glycogen synthase and phosphorylase activities, never reported before, suggests that the integrated regulation of the phosphorylation state of both glycogen synthase and phosphorylase might be involved in the control of glycogen deposition after high-intensity exercise.

Fatty acid and amino acid modulation of glucose cycling in isolated rat hepatocytes

2001 ◽  
Vol 358 (3) ◽  
pp. 665-671 ◽  
Author(s):  
Lori A. GUSTAFSON ◽  
Mies NEEFT ◽  
Dirk-Jan REIJNGOUD ◽  
Folkert KUIPERS ◽  
Hans P. SAUERWEIN ◽  
...  
Keyword(s):  
Amino Acids ◽  
Glycogen Phosphorylase ◽  
Glycogen Synthase ◽  
Lactate Production ◽  
Rat Hepatocytes ◽  
Glycolytic Flux ◽  
Isolated Rat Hepatocytes ◽  
Glycogen Accumulation ◽  
Glycogen Deposition ◽  
Intracellular Glucose

We studied the influence of glucose/glucose 6-phosphate cycling on glycogen deposition from glucose in fasted-rat hepatocytes using S4048 and CP320626, specific inhibitors of glucose-6-phosphate translocase and glycogen phosphorylase respectively. The effect of amino acids and oleate was also examined. The following observations were made: (1) with glucose alone, net glycogen production was low. Inhibition of glucose-6-phosphate translocase increased intracellular glucose 6-phosphate (3-fold), glycogen accumulation (5-fold) without change in active (dephosphorylated) glycogen synthase (GSa) activity, and lactate production (4-fold). With both glucose 6-phosphate translocase and glycogen phosphorylase inhibited, glycogen deposition increased 8-fold and approached reported in vivo rates of glycogen deposition during the fasted → fed transition. Addition of a physiological mixture of amino acids in the presence of glucose increased glycogen accumulation (4-fold) through activation of GS and inhibition of glucose-6-phosphatase flux. Addition of oleate with glucose present decreased glycolytic flux and increased the flux through glucose 6-phosphatase with no change in glycogen deposition. With glucose 6-phosphate translocase inhibited by S4048, oleate increased intracellular glucose 6-phosphate (3-fold) and net glycogen production (1.5-fold), without a major change in GSa activity. It is concluded that glucose cycling in hepatocytes prevents the net accumulation of glycogen from glucose. Amino acids activate GS and inhibit flux through glucose-6-phosphatase, while oleate inhibits glycolysis and stimulates glucose-6-phosphatase flux. Variation in glucose 6-phosphate does not always result in activity changes of GSa. Activation of glucose 6-phosphatase flux by fatty acids may contribute to the increased hepatic glucose production as seen in Type 2 diabetes.

scholarly journals High Performance Conditioning Shampoo with Hyaluronic Acid and Sustainable Surfactants

Cosmetics ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 71
Author(s):  
Kelly Yorke ◽  
Samiul Amin
Keyword(s):  
Molecular Weight ◽  
Surface Tension ◽  
Hyaluronic Acid ◽  
High Performance ◽  
Low Cost ◽  
Hair Follicles ◽  
Shear Rates ◽  
Molecular Weights ◽  
Surface Activity Properties ◽  
Alkyl Polyglucoside

Recently, consumers have become invested in more natural and sustainable ingredients contained in personal care products. Unfortunately, cationic surfactants are still heavily relied on as primary conditioning agents in products such as conditioning shampoos because of their ability to cling well to the negatively charged surface of hair follicles. Additionally, sulfates are utilized as cleansing agents because they are highly effective and low cost. The objective of this study is to find a more sustainable formulation for a conditioning shampoo without compromising the desired wet combing, rheological, and surface activity properties. The systems which were investigated contained hyaluronic acid (HA) at a variety of molecular weights and concentrations, in combination with a surfactant, either acidic sophorolipid (ASL) or alkyl polyglucoside (APG), and varying the presence of sodium chloride. A Dia-stron was utilized to test the wet combing force, a rheometer recorded the viscosity at various shear rates, and a tensiometer measured the surface tension of the samples before a visual foaming study was conducted. Molecular weight and concentration seemed to have a large impact on wet combing force, as well as rheology, with the largest molecular weight and concentration producing the lowest friction coefficient and desired rheological profile. The addition of a surfactant significantly aids in the reduction in surface tension and increased foamability. Therefore, the optimal system to achieve the largest reduction in wet combing force, large viscosity with shear-thinning behavior, and relatively low surface tension with decent foaming is composed of 1% HA at 800 kDa, 10% ASL and 1% NaCl. This system shows a viable sulfate-free and silicone-free option that can achieve both conditioning and cleansing.

Molecular Weight Measurements of Low Molecular Weight Heparins by Gel Permeation Chromatography

1997 ◽  
Vol 77 (04) ◽  
pp. 668-674 ◽  
Author(s):  
B Mulloy ◽  
C Gee ◽  
S F Wheeler ◽  
R Wait ◽  
E Gray ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Low Molecular Weight Heparin ◽  
High Performance ◽  
Gel Permeation Chromatography ◽  
Low Molecular Weight ◽  
Low Molecular Weight Heparins ◽  
Molecular Weights ◽  
Calibration Table ◽  
Gel Permeation ◽  
Degraded Material

SummaryThe molecular weight profiles of low molecular weight heparin samples have been measured by high-performance gel permeation chromatography using as calibrant the heparinase-degraded material (90/686) now established as the 1st International Reference Preparation (IRP) Low Molecular Weight Heparin for Molecular Weight Calibration. Use of the calibrant as a broad molecular weight standard is described and a calibration table provided based on data collected over several years in one laboratory.In order to confirm the assignment of degree of polymerisation to resolved oligosaccharide peaks in the calibrant, molecular weights of oligosaccharides fractionated from the 1st IRP were independently determined by fast atom bombardment mass spectrometry (FAB MS).The molecular weight distributions of commercial low molecular weight heparins have been characterized. Measurements of molecular weight parameters of heparin molecular weight standards from several sources provide comparisons between the molecular weight scales of this and other studies.

IM7/LARCTM-IA polyimide composites

1995 ◽  
Vol 7 (1) ◽  
pp. 105-124 ◽  
Author(s):  
T H Hou ◽  
N J Johnston ◽  
T L St Clair
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Performance ◽  
Flexural Modulus ◽  
Engineering Properties ◽  
Solvent Resistance ◽  
Polymer Backbone ◽  
Molecular Weights ◽  
Interlaminar Shear ◽  
Langley Research Center

LARCTM-IA (Langley Research Center-Improved Adhesive) aromatic polyimide, based on oxydiphthalic anhydride and 3.4'-oxydianiline, was evaluated as a matrix for high-performance composites. Six poly(amide acid)solutions in N-methylpyrrolidone (NMP), end-capped with phthalic anhydride to various theoretical molecular weights, were synthesized and their molecular weights and molecular weight distributions determined, Importantly, high concentrations of low-molecular-weight species were found in all the offset compositions. Except for the 1% offset polymer, all fully imidized films failed a solvent resistance test which involved immersion in acetone, methyl ethyl ketone, toluene, dimethylacetamide and chloroform for 1 min followed by a fingernail crease. Unidirectional prepreg was fabricated from each of the six resins by both standard drum winding procedures and the LARC multipurpose prepreg machine. The consolidation cycle developed previously for IM7/LARCTM-ITPI composites was found to be equally applicable for IM7/LARCTM-IA composites since both materials are similar and were prepared in and prepregged from NMP. An optimal end-capped resin composition was identified (4% stoichiometric imbalance) by using, as a screening tool, initial composite mechanical properties (short-beam shear strength, longitudinal flexural strength and flexural modulus) at room temperature, 93, 150 and 177°C. Composite engineering properties for the 4% offset composition were obtained, including longitudinal tension, transverse flexural, longitudinal compression, interlaminar shear, short block compression, open hole compression and compression strength after impact. Notably, the CAI strength was 303.2 MPa (44 Ksi) showing that the LARCTM-IA composites have good damage tolerance. A minor modification of LARCTM-IA polymer backbone which did not alter the consolidation cycle, designated as LARCTM-IAX, improved solvent resistance measurably. Mechanical properties of IM7/LARCTM-IAX composites were shown to be comparable to those exhibited by the baseline IM7/LARCTM-IA composites.

Sign in / Sign up

Export Citation Format

Share Document