Conifer wood quality and marker-aided selection: a case study

1992 ◽  
Vol 22 (7) ◽  
pp. 1009-1017 ◽  
Author(s):  
Claire G. Williams ◽  
David B. Neale
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Gene Action ◽  
Wood Quality ◽  
Forest Tree ◽  
Selection Response ◽  
Length Polymorphisms ◽  
Selection For ◽  
Conifer Wood

Using marker-aided selection for improving wood specific gravity in loblolly pine (Pinustaeda L.) could shorten the generation interval and improve selection response. A genetic map with restriction fragment length polymorphisms and other markers is in progress using a pedigree suited to mapping genes for specific gravity. Mapping quantitative trait loci for specific gravity provides a prototype for demonstrating benefits of marker-aided selection and for testing hypotheses on the mode of gene action in forest tree species. Ultimately, the utility of marker-aided selection must be compared with phenotype-based selection in small specialty populations.

Regional variation in wood specific gravity of planted loblolly pine in the United States

2008 ◽  
Vol 38 (4) ◽  
pp. 698-710 ◽  
Author(s):  
Lewis Jordan ◽  
Alexander Clark ◽  
Laurence R. Schimleck ◽  
Daniel B. Hall ◽  
Richard F. Daniels
Keyword(s):  
United States ◽  
Specific Gravity ◽  
Loblolly Pine ◽  
Wood Quality ◽  
The United States ◽  
South Atlantic ◽  
Quality Trait ◽  
The South ◽  
Juvenile Period ◽  
Natural Range

Loblolly pine ( Pinus taeda L.) is the most important plantation species in the southeastern United States and specific gravity (SG) is its most important wood quality trait. Analysis of annual ring SG of breast height (1.37 m) increment cores from 3957 trees representing 147 plantations across the species natural range showed that ring SG increases with increasing age and varies significantly among physiographic regions. The South Atlantic and Gulf regions had the highest ring SGs, while the Hilly and Piedmont regions had the lowest. Based on ring SG, the juvenile period averages 4.3 years, followed by 8.6 years of transition wood, with mature wood produced by year 13. Whole-core mean SG was significantly higher in the South Atlantic (0.486) compared with the other regions (mean = 0.455), which were not statistically different from each other. Trees from the South Atlantic have significantly higher whole-core SG because they contain significantly more latewood (40.1%) compared with trees growing in other regions (33.8%). Maps indicate that stands in the South Atlantic and Gulf regions have the highest SG at a given age. Stands growing on the northern and western fringe of the natural range of loblolly pine have the lowest whole-core SG.

scholarly journals Genetic Variation in the Microfibril Angle of Loblolly Pine From Two Test Sites

2004 ◽  
Vol 28 (4) ◽  
pp. 196-204 ◽  
Author(s):  
Jennifer H. Myszewski ◽  
Floyd E. Bridgwater ◽  
William J. Lowe ◽  
Thomas D. Byram ◽  
Robert A. Megraw
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Combining Ability ◽  
Growth Traits ◽  
Genetic Relationships ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Microfibril Angle ◽  
Narrow Sense Heritability ◽  
Individual Tree

Abstract In recent years, several studies have examined the effect of microfibril angle (MFA) on wood quality. However, little research has been conducted upon the genetic mechanisms controlling MFA. In this study, we examined the heritability of MFA in loblolly pine, Pinus taeda L.,and its genetic relationships with height, diameter, volume, and specific gravity. Increment cores were collected at breast height from 20 to 25 progeny from each of 12 to 17 crosses (among 11 parents) in two modified partial-diallels in different locations in southern Arkansas. Specific gravitywas measured on segments containing rings 1 through 5 and on segments containing rings 6 through 20. MFA was measured on the earlywood and latewood sections of rings 4, 5, 19, and 20. Rings 4 and 5 were chosen as representative of core wood and rings 19 and 20 as representative of outer wood. Analyses of variance revealed statistically significant genetic and environmental influences on MFA. Significant general combining ability (GCA), specific combining ability (SCA), and SCA × block effects indicated that there are both additive and nonadditive genetic influences on MFA. Individual-tree, narrow-sense heritability estimates were variable, ranging from 0.17 for earlywood (ring) 4 MFA to 0.51 for earlywood (ring) 20 MFA. Genetic correlations between MFA, specific gravity, and the growth traits were nonsignificant due to large estimated standard errors. South.J. Appl. For. 28(4):196–204.

Growth and Wood Properties in a Carolina Sandhills Pine Seed Source Study

1992 ◽  
Vol 16 (4) ◽  
pp. 164-169 ◽  
Author(s):  
J. B. Jett ◽  
W. M. Guiness
Keyword(s):  
South Carolina ◽  
Specific Gravity ◽  
Loblolly Pine ◽  
Wood Quality ◽  
Dry Weight ◽  
Wood Properties ◽  
Seed Source ◽  
Growing Seasons ◽  
Seed Sources ◽  
Excellent Growth

Abstract Eight pine sources were planted on a sandhills site in South Carolina. Total height, dbh, wood specific gravity, tracheid length, and fusiform rust (Cronartium quercum [Berk.] Miyabe ex. Shirai f. sp. fusiforme) infection were evaluated following 17 growing seasons. The Choctawhatcheesource of sand pine (Pinus clausa [Chapm.] Vasey) is apparently well adapted to the deep sands of the Carolina sandhills and exhibited superior height and diameter growth to slash pine, two local sources of loblolly pine (P. taeda L.), and two sources of Virginia pine (P. virginiana Mill.). A combination of excellent growth and reasonable survival resulted in significantly more cubic foot volume per acre than the other seed sources or species included in this study. Despite having the lowest weighted specific gravity of all sources in this planting, the Choctawhatchee sand pineproduced more than twice as much dry weight per acre than any other source. A single open-pollinated family of drought-hardy loblolly pine from Bastrop County, TX, displayed excellent growth, survival, rust resistance, and wood quality. Its performance warrants a more careful and wider evaluationof this seed source for use on these difficult sandhills sites in the Carolinas. South. J. Appl. For. 16(4):164-169

Genetic Variation in Acoustic Time of Flight and Drill Resistance of Juvenile Wood in a Large Loblolly Pine Breeding Population

2019 ◽  
Vol 65 (4) ◽  
pp. 469-482 ◽  
Author(s):  
Trevor D Walker ◽  
Fikret Isik ◽  
Steven E McKeand
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Time Of Flight ◽  
Phenotypic Correlation ◽  
Environment Interaction ◽  
Quality Traits ◽  
Economic Traits ◽  
Stem Straightness

AbstractAcoustic time of flight and drill resistance (surrogates for wood stiffness and density, respectively) were measured on 11,097 standing trees from 269 pollen-mix families of loblolly pine (Pinus taeda L.) in 6- to 9-year-old progeny tests at eight sites across the southeastern United States. Specific gravity was measured on two test sites. The phenotypic correlation between specific gravity and drill resistance was moderate (r = 0.68), whereas the genetic correlation was very strong (rg = 0.96). Narrow-sense heritabilities for acoustic time of flight and drill resistance were around 0.35 for individual trees and very strong (0.90) for family means. High genetic correlations (>0.80) between pairs of sites suggested a low genotype-by-environment interaction for both traits. Genetic correlations between wood quality traits and other economic traits (growth and stem straightness) were low except for a moderate correlation between acoustic time of flight and tree slenderness (rg = –0.64). The checklot ranked near the middle for both wood quality traits, implying no inadvertent selection occurred in this population that has been selected intensively for volume productivity. This study is the first to apply these tools in a large breeding program, and results suggest they are effective for selecting genotypes for wood quality.

ESTIMASI NILAI HERITABILITAS BOBOT IKAN MAS VARIETAS PUNTEN DALAM PROGRAM SELEKSI INDIVIDU

2016 ◽  
Vol 11 (3) ◽  
pp. 217
Author(s):  
Estu Nugroho ◽  
Budi Setyono ◽  
Mochammad Su’eb ◽  
Tri Heru Prihadi
Keyword(s):  
Body Weight ◽  
Selection Response ◽  
Base Population ◽  
Breeding Programs ◽  
Male And Female ◽  
Body Weight Trait ◽  
Population Selection ◽  
Selection For ◽  
Weight Trait ◽  
Selection Of

Program pemuliaan ikan mas varietas Punten dilakukan dengan seleksi individu terhadap karakter bobot ikan. Pembentukan populasi dasar untuk kegiatan seleksi dilakukan dengan memijahkan secara massal induk ikan mas yang terdiri atas 20 induk betina dan 21 induk jantan yang dikoleksi dari daerah Punten, Kepanjen (delapan betina dan enam jantan), Kediri (tujuh betina dan 12 jantan), Sragen (27 betina dan 10 jantan), dan Blitar (15 betina dan 11 jantan). Larva umur 10 hari dipelihara selama empat bulan. Selanjutnya dilakukan penjarangan sebesar 50% dan benih dipelihara selama 14 bulan untuk dilakukan seleksi dengan panduan hasil sampling 250 ekor individu setiap populasi. Seleksi terhadap calon induk dilakukan saat umur 18 bulan pada populasi jantan dan betina secara terpisah dengan memilih berdasarkan 10% bobot ikan yang terbaik. Calon induk yang terseleksi kemudian dipelihara hingga matang gonad, kemudian dipilih sebanyak 150 pasang dan dipijahkan secara massal. Didapatkan respons positif dari hasil seleksi berdasarkan bobot ikan, yaitu 49,89 g atau 3,66% (populasi ikan jantan) dan 168,47 g atau 11,43% (populasi ikan betina). Nilai heritabilitas untuk bobot ikan adalah 0,238 (jantan) dan 0,505 (betina).Punten carp breeding programs were carried out by individual selection for body weight trait. The base population for selection activities were conducted by mass breeding of parent consisted of 20 female and 21 male collected from area Punten, eight female and six male (Kepanjen), seven female and 12 male (Kediri), 27 female and 10 male (Sragen), 15 female and 11 male (Blitar). Larvae 10 days old reared for four moths. Then after spacing out 50% of total harvest, the offspring reared for 14 months for selection activity based on the sampling of 250 individual each population. Selection of broodstock candidates performed since 18 months age on male and female populations separately by selecting based on 10% of fish with best body weight. Candidates selected broodstocks were then maintained until mature. In oder to produce the next generation 150 pairs were sets and held for mass spawning. The results revealed that selection response were positive, 49.89 g (3.66%) for male and 168.47 (11.43%) for female. Heritability for body weight is 0.238 (male) and 0.505 (female).

A Case Study on Experiment Site Selection for PV Energy Generation Forecast

2020 ◽  
Author(s):  
Huang Yu Hsiang ◽  
Tseng Sheng Yuan ◽  
Ping Wang ◽  
Lin Wen Hui ◽  
Lin Hsiao Chung
Keyword(s):  
Site Selection ◽  
Energy Generation ◽  
Selection For

scholarly journals EFFECTS OF POPULATION SIZE AND SELECTION INTENSITY ON SHORT-TERM RESPONSE TO SELECTION FOR POSTWEANING GAIN IN MICE

Genetics ◽  
1973 ◽  
Vol 73 (3) ◽  
pp. 513-530
Author(s):  
J P Hanrahan ◽  
E J Eisen ◽  
J E Legates
Keyword(s):  
Population Size ◽  
Selection Response ◽  
Selection Intensity ◽  
Realized Heritability ◽  
Family Selection ◽  
Effective Population ◽  
Population Sizes ◽  
Selection For ◽  
Selection Intensities ◽  
Term Response

ABSTRACT The effects of population size and selection intensity on the mean response was examined after 14 generations of within full-sib family selection for postweaning gain in mice. Population sizes of 1, 2, 4, 8 and 16 pair matings were each evaluated at selection intensities of 100% (control), 50% and 25% in a replicated experiment. Selection response per generation increased as selection intensity increased. Selection response and realized heritability tended to increase with increasing population size. Replicate variability in realized heritability was large at population sizes of 1, 2 and 4 pairs. Genetic drift was implicated as the primary factor causing the reduced response and lowered repeatability at the smaller population sizes. Lines with intended effective population sizes of 62 yielded larger selection responses per unit selection differential than lines with effective population sizes of 30 or less.

scholarly journals Non-Destructive Assessment of Wood Stiffness in Scots Pine (Pinus sylvestris L.) and its Use in Forest Tree Improvement

Forests ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 491 ◽  
Author(s):  
Irena Fundova ◽  
Tomas Funda ◽  
Harry X. Wu
Keyword(s):  
Scots Pine ◽  
Growth Traits ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Forest Tree ◽  
Wood Stiffness ◽  
Standing Trees ◽  
Genetic And Phenotypic Correlations ◽  
Sib Families ◽  
Using Data

Wood stiffness is an important wood mechanical property that predetermines the suitability of sawn timber for construction purposes. Negative genetic correlations between wood stiffness and growth traits have, however, been reported for many conifer species including Scots pine. It is, therefore, important that breeding programs consider wood stiffness and growth traits simultaneously. The study aims to (1) evaluate different approaches of calculating the dynamic modulus of elasticity (MOE, non-destructively assessed stiffness) using data from X-ray analysis (SilviScan) as a benchmark, (2) estimate genetic parameters, and (3) apply index selection. In total, we non-destructively measured 622 standing trees from 175 full-sib families for acoustic velocity (VEL) using Hitman and for wood density (DEN) using Resistograph and Pilodyn. We combined VEL with different wood densities, raw (DENRES) and adjusted (DENRES.TB) Resistograph density, Pilodyn density measured with (DENPIL) and without bark (DENPIL.B), constant of 1000 kg·m−3 (DENCONST), and SilviScan density (DENSILV), to calculate MOEs and compare them with the benchmark SilviScan MOE (MOESILV). We also derived Smith–Hazel indices for simultaneous improvement of stem diameter (DBH) and wood stiffness. The highest additive genetic and phenotypic correlations of the benchmark MOESILV with the alternative MOE measures (tested) were attained by MOEDENSILV (0.95 and 0.75, respectively) and were closely followed by MOEDENRES.TB (0.91 and 0.70, respectively) and MOEDENCONST and VEL (0.91 and 0.65, respectively for both). Correlations with MOEDENPIL, MOEDENPIL.B, and MOEDENRES were lower. Narrow-sense heritabilities were moderate, ranging from 0.39 (MOESILV) to 0.46 (MOEDENSILV). All indices revealed an opportunity for joint improvement of DBH and MOE. Conclusions: MOEDENRES.TB appears to be the most efficient approach for indirect selection for wood stiffness in Scots pine, although VEL alone and MOEDENCONST have provided very good results too. An index combining DBH and MOEDENRES.TB seems to offer the best compromise for simultaneous improvement of growth, fiber, and wood quality traits.

Sign in / Sign up

Export Citation Format

Share Document