Effective Properties of Superconducting and Superfluid Composites

1998 ◽  
Vol 12 (29n31) ◽  
pp. 3063-3073 ◽  
Author(s):  
Leonid Berlyand

We consider a mathematical model which describes an ideal superfluid with a large number of thin insulating rods and an ideal superconductor reinforced by such rods. We suggest a homogenization procedure for calculating effective properties of both composite media. From the numerical point of view the procedure amounts to solving a linear problem in a periodicity cell of unit size.

2010 ◽  
Vol 38 (4) ◽  
pp. 286-307
Author(s):  
Carey F. Childers

Abstract Tires are fabricated using single ply fiber reinforced composite materials, which consist of a set of aligned stiff fibers of steel material embedded in a softer matrix of rubber material. The main goal is to develop a mathematical model to determine the local stress and strain fields for this isotropic fiber and matrix separated by a linearly graded transition zone. This model will then yield expressions for the internal stress and strain fields surrounding a single fiber. The fields will be obtained when radial, axial, and shear loads are applied. The composite is then homogenized to determine its effective mechanical properties—elastic moduli, Poisson ratios, and shear moduli. The model allows for analysis of how composites interact in order to design composites which gain full advantage of their properties.


2017 ◽  
Vol 992 (4) ◽  
pp. 32-38 ◽  
Author(s):  
E.G. Voronin

The article opens a cycle of three consecutive publications dedicated to the phenomenon of the displacement of the same points in overlapping scans obtained adjacent CCD matrices with opto-electronic imagery. This phenomenon was noticed by other authors, but the proposed explanation for the origin of displacements and the resulting estimates are insufficient, and developed their solutions seem controversial from the point of view of recovery of the measuring accuracy of opticalelectronic space images, determined by the physical laws of their formation. In the first article the mathematical modeling of the expected displacements based on the design features of a scanning opto-electronic imaging equipment. It is shown that actual bias cannot be forecast, because they include additional terms, which may be gross, systematic and random values. The proposed algorithm for computing the most probable values of the additional displacement and ways to address some of the systematic components of these displacements in a mathematical model of optical-electronic remote sensing.


2002 ◽  
Vol 34 (03) ◽  
pp. 484-490 ◽  
Author(s):  
Asger Hobolth ◽  
Eva B. Vedel Jensen

Recently, systematic sampling on the circle and the sphere has been studied by Gual-Arnau and Cruz-Orive (2000) from a design-based point of view. In this note, it is shown that their mathematical model for the covariogram is, in a model-based statistical setting, a special case of the p-order shape model suggested by Hobolth, Pedersen and Jensen (2000) and Hobolth, Kent and Dryden (2002) for planar objects without landmarks. Benefits of this observation include an alternative variance estimator, applicable in the original problem of systematic sampling. In a wider perspective, the paper contributes to the discussion concerning design-based versus model-based stereology.


Author(s):  
Iulia Clitan ◽  
◽  
Adela Puscasiu ◽  
Vlad Muresan ◽  
Mihaela Ligia Unguresan ◽  
...  

Since February 2020, when the first case of infection with SARS COV-2 virus appeared in Romania, the evolution of COVID-19 pandemic continues to have an ascending allure, reaching in September 2020 a second wave of infections as expected. In order to understand the evolution and spread of this disease over time and space, more and more research is focused on obtaining mathematical models that are able to predict the evolution of active cases based on different scenarios and taking into account the numerous inputs that influence the spread of this infection. This paper presents a web responsive application that allows the end user to analyze the evolution of the pandemic in Romania, graphically, and that incorporates, unlike other COVID-19 statistical applications, a prediction of active cases evolution. The prediction is based on a neural network mathematical model, described from the architectural point of view.


Author(s):  
V. Y. Stepanov

The article gives a classification of the main components of unmanned aerial vehicle (UAV) systems, gives the areas in which the application of UAVs is actual in practice today. Further, the UAV is considered in more detail from the point of view of its flight dynamics analysis, the equation necessary for creating a mathematical model, as well as the model of an ordinary dynamic system as a non-stationary nonlinear controlled object, is given. Next, a description of the developed software for modeling and a description of program algorithm are given. Finally, a conclusion describes the necessary directions for further scientific researches.


2021 ◽  
Vol 25 (3) ◽  
pp. 332-341
Author(s):  
I. V. Fokin ◽  
A. N. Smirnov

The aim was to create a mathematical model describing the development of a production (shop-to-shop) routing of mechanical engineering products based on a 3D model and allowing the cost of the final product to be reduced. The developed mathematical model was simulated based on 3D models designed in the Siemens NX system, which were subsequently imported into the *stp format and recognized by a designed module written in the Phyton programming language. The factors of the production environment affecting the formation of the production routing of mechanical engineering products were determined. A diagram of the algorithm for the “constructive element - technological operation - means of technological equipment (equipment-tool)” relationship was developed. Based on the results of testing the developed mathematical model, the use of neural networks as a tool for the implementation and automation of the work was found advantageous as compared to the standard scheme of work of a process engineer when developing a production routing of mechanical engineering products. These advantages include a decrease in the time for the development of a routing and the cost of the final product. The developed model has a practical limitation consisting in a rather complex geometry of some structural elements of a unit, which impedes the development of an algorithm for recognizing their structure. The use of a neural network prototype in automatic mode is advisable for relatively simple parts (including a flange, hole, chamfer and rounding). However, since the number of simple units from the recognition point of view amounts to about 40% among the nomenclature of manufactured units, the reduction in the development time of the technological process in comparison with the conventional approach comprises only 10–25% of the total time of technological preparation.


2021 ◽  
Vol 316 ◽  
pp. 928-935
Author(s):  
Alexander Shapoval ◽  
Iurii Savchenko ◽  
Oleg Markov

Developed a mathematical model, which makes it possible to optimize, from the point of view of defect formation, the parameters of stress concentration in a deformable elastic body of the materials being processed, destruction is considered as a method for creating defects at a submicroscopic level in various media. Getting expressions of conformal reflection of single circle on an arbitrary area, using a conformal reflection and transformation of Laplace, it is possible to design behavior of a tensely deformed state of solid at the arbitrary loading.


Author(s):  
Diego Liberati

In many fields of research, as well as in everyday life, it often turns out that one has to face a huge amount of data, without an immediate grasp of an underlying simple structure, often existing. A typical example is the growing field of bio-informatics, where new technologies, like the so-called Micro-arrays, provide thousands of gene expressions data on a single cell in a simple and fast integrated way. On the other hand, the everyday consumer is involved in a process not so different from a logical point of view, when the data associated to his fidelity badge contribute to the large data base of many customers, whose underlying consuming trends are of interest to the distribution market. After collecting so many variables (say gene expressions, or goods) for so many records (say patients, or customers), possibly with the help of wrapping or warehousing approaches, in order to mediate among different repositories, the problem arise of reconstructing a synthetic mathematical model capturing the most important relations between variables. To this purpose, two critical problems must be solved: 1 To select the most salient variables, in order to reduce the dimensionality of the problem, thus simplifying the understanding of the solution 2 To extract underlying rules implying conjunctions and/or disjunctions between such variables, in order to have a first idea of their even non linear relations, as a first step to design a representative model, whose variables will be the selected ones When the candidate variables are selected, a mathematical model of the dynamics of the underlying generating framework is still to be produced. A first hypothesis of linearity may be investigated, usually being only a very rough approximation when the values of the variables are not close to the functioning point around which the linear approximation is computed. On the other hand, to build a non linear model is far from being easy: the structure of the non linearity needs to be a priori known, which is not usually the case. A typical approach consists in exploiting a priori knowledge to define a tentative structure, and then to refine and modify it on the training subset of data, finally retaining the structure that best fits a cross-validation on the testing subset of data. The problem is even more complex when the collected data exhibit hybrid dynamics, i.e. their evolution in time is a sequence of smooth behaviors and abrupt changes.


2020 ◽  
Vol 13 (08) ◽  
pp. 2050169
Author(s):  
Iveta Nikolova ◽  
Anka Markovska ◽  
Mikhail Kolev

Nowadays autoimmune diseases are widely distributed. More than 80 illnesses are included into this group of conditions. Their causes are not clear exactly, but it is believed that among them are genetic factors, viral infections, socio-economic conditions, etc. We propose a new mathematical model describing a general autoimmune disease in order to analyze some mechanisms of autoimmune disorders. The model is a system of ordinary differential equations. We perform preliminary qualitative analysis of the model as well as propose an algorithm for numerical simulations. Some results of our numerical experiments are presented and commented from a biological point of view.


2012 ◽  
Vol 271-272 ◽  
pp. 1073-1076
Author(s):  
Zhen Hua Duan ◽  
Zhang Yong Wu ◽  
Qing Hui Wang ◽  
Xi Wu ◽  
Cheng Zhuo Wen

According to the requirements of hydraulic transmission to two-way cartridge valve, and from the practical point of view a water hydraulic two-way cartridge valve was designed. Then its structure characteristics was introduced and the mathematical model was established. The simulation analysis of the water hydraulic two-way cartridge valve has been carried out through Matlab/Simulink proving that its structure was reasonable and it had good performances.


Sign in / Sign up

Export Citation Format

Share Document