Theoretical investigation of nano-photonic graphene-based waveguide

2020 ◽  
Vol 34 (31) ◽  
pp. 2050350
Author(s):  
Yupeng Wang ◽  
Yawen Xiao ◽  
Luning Wang ◽  
Haichen Rong ◽  
Xin Li ◽  
...  
Keyword(s):  
Graphene Layer ◽  
Electric Field Distribution ◽  
The Other ◽  
Core Material ◽  
Physical Mechanisms ◽  
The Core ◽  
Vertical Slot ◽  
Photoelectronic Device ◽  
Simulation Results ◽  
Slot Structure

This paper reports two design thoughts about nano-scale waveguides including parallel slot structure and vertical slot structure. According to the simulation results of different schemes, the design of parallel slot structure is demonstrated to exhibit better performance. Thus, we further explore its typical characteristics based on this scheme, such as electric field distribution, effective refractive index, non-linearity, dispersion and so on. Besides, we explore the properties of the waveguide under different thicknesses of the core material. On the other hand, combining with graphene layer applied to additional bias voltage, the tunable properties of the waveguide are realized. These results can provide significant reference for photoelectronic device field and lead to a deeper insight of the physical mechanisms of graphene-based waveguides.

Effects of Core Material on Extrudability of Cu/Pure Al, Cu/Al3003 Clad Composites by Indirect Extrusion

2005 ◽  
Vol 475-479 ◽  
pp. 967-970 ◽  
Author(s):  
Taek Kyun Jung ◽  
Hyouk Chon Kwon ◽  
Sung Chul Lim ◽  
Young Sup Lee ◽  
Mok Soon Kim
Keyword(s):  
Diffusion Layer ◽  
Bonding Strength ◽  
Pure Aluminum ◽  
Extrusion Ratio ◽  
The Other ◽  
Core Material ◽  
Diffusion Layer Thickness ◽  
The Core ◽  
The Difference ◽  
Sheath Material

We investigated about the effects of core material(Pure Al, Al3003) on extrudability such as the maximum extrusion ratio and the bonding strength of Copper Clad Aluminum(CCA) by indirect extrusion. As a results of this experiment, the maximum extrusion ratio of Cu/Al3003 was 38, which was larger than 21.39 of Cu/Al(Cu/pure Al). It was because that the difference of flow stress between copper as the sheath material and Al3003 as the core material was smaller than that of between copper and pure aluminum under the same extrusion temperature of 623K. The bonding strength gradually increased when the extrusion ratio increased, on the other hand, the bonding strength of Cu/Al3003 was higher than that of Cu/Al under same extrusion conditions. The diffusion layer thickness that affected bonding strength was not affected by the kind of core material, but it gradually increased when the extrusion ratio increased. It was thought that Cu/Al3003 had a more intimate diffusion layer than Cu/Al had because the extrusion pressure of Cu/Al3003 was higher than that of Cu/Al under the same extrusion conditions.

Unveiling electrically tunable characteristics of second-order dispersion in graphene-silicon nitride waveguides

2019 ◽  
Vol 33 (05) ◽  
pp. 1950053 ◽  
Author(s):  
Peng Xie ◽  
Mantian Xue ◽  
Yu Wen ◽  
Xiaofeng Li ◽  
Xinyu Wang ◽  
...  
Keyword(s):  
Silicon Nitride ◽  
Graphene Layer ◽  
Optoelectronic Devices ◽  
Second Order ◽  
Core Material ◽  
The Core ◽  
Large Bandwidth ◽  
Waveguide Model ◽  
Potential Applications ◽  
Order Dispersion

In this paper, we proposed a graphene-silicon nitride (GSN) waveguide model, which was unveiled to unveil its second-order dispersion (SOD) characteristics. The influences of the different thicknesses of graphene layer and the different heights from graphene to the core material of silicon nitride on SOD were investigated in detail. The tunability of SOD via controlling the bias voltage applied to the graphene layer was demonstrated and a 50 nm wavelength tuning was achieved with a small perturbation in voltage while keeping the geometric structure of the waveguide unchanged. Moreover, a flat SOD curve of the GSN waveguide was obtained with a large bandwidth of 700 nm between the two zero-dispersion wavelengths (ZDWs). These results provided significant insights for potential applications of graphene-related optoelectronic devices, integrated optics, and optical communications.

scholarly journals Management of Grossly Decayed Mandibular Molar with Different Designs of Split Cast Post and Core

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Rashmi Bansal ◽  
Nakul Mehrotra ◽  
Priyanka Chowdhary ◽  
Anuraag Gurtu
Keyword(s):  
Single Unit ◽  
The Other ◽  
Cavity Wall ◽  
Metal Casting ◽  
Core Material ◽  
Tooth Structure ◽  
The Core ◽  
Mandibular Molar ◽  
Post And Core ◽  
Effective Design

Mandibular molar with extensive loss of tooth structure, especially where no cavity wall is remaining, and insertion of posts in both the roots appear necessary so as to achieve proper retention for the core material. A single unit metal casting with two posts, one in the mesial root and the other in the distal divergent root, is difficult to fabricate due to difference in the path of insertion of the two posts. Multisection post and core or single cast post and core with auxiliary post can be an effective design to manage grossly decayed mandibular molars.

The Salvage of Ideas: Schumpeter and the Core Problems Still Confronting Economics

2003 ◽  
pp. 15-26
Author(s):  
P. Wynarczyk
Keyword(s):  
The Other ◽  
The Core ◽  
Other Hand ◽  
The One

Two aspects of Schumpeter' legacy are analyzed in the article. On the one hand, he can be viewed as the custodian of the neoclassical harvest supplementing to its stock of inherited knowledge. On the other hand, the innovative character of his works is emphasized that allows to consider him a proponent of hetherodoxy. It is stressed that Schumpeter's revolutionary challenge can lead to radical changes in modern economics.

The Final ‘Thank You’

Derrida Today ◽  
2010 ◽  
Vol 3 (1) ◽  
pp. 21-36
Author(s):  
Grant Farred
Keyword(s):  
South Africa ◽  
South African ◽  
Jacques Derrida ◽  
Political Transition ◽  
The Other ◽  
World Cup ◽  
The Core ◽  
Nelson Mandela ◽  
Black President ◽  
The Moment

‘The Final “Thank You”’ uses the work of Jacques Derrida and Friedrich Nietzsche to think the occasion of the 1995 rugby World Cup, hosted by the newly democratic South Africa. This paper deploys Nietzsche's Zarathustra to critique how a figure such as Nelson Mandela is understood as a ‘Superman’ or an ‘Overhuman’ in the moment of political transition. The philosophical focus of the paper, however, turns on the ‘thank yous’ exchanged by the white South African rugby captain, François Pienaar, and the black president at the event of the Springbok victory. It is the value, and the proximity and negation, of the ‘thank yous’ – the relation of one to the other – that constitutes the core of the article. 1

Analysis (Hans Morgenthau) to the concept of power and applied to the units of the international system

2019 ◽  
Vol 1 (1) ◽  
pp. 138
Author(s):  
Saif Nasrat Tawfiq Al - Haramazi
Keyword(s):  
Applied Sciences ◽  
International System ◽  
The Other ◽  
Human Sciences ◽  
Basic Requirement ◽  
The Core ◽  
Hans Morgenthau

The theoretical curriculum in all disciplines is a basic requirement that nourishes the minds of the intellectual and cognitive recipients in the various scientific and cognitive stages. This is the framework that distinguishes the academic understanding of the anarchic, which is one of the most important and important keys in thinking and success in that jurisdiction or field, , Because it is unreasonable and logical to get into the core of any subject without searching and searching for its intellectual and historical bases to find out the reasons and reasons that surrounded this idea which was later recognized as an important contribution to the field of human sciences. Applied Sciences and other from the other side.

AFRICAN WOMEN AND FORBIDDEN GROUNDS: FEMALE SEXUALITY AND SELF-DETERMINATION IN AFRICAN LITERATURE

Imbizo ◽  
2017 ◽  
Vol 7 (1) ◽  
pp. 40-54
Author(s):  
Oyeh O. Otu
Keyword(s):  
Female Sexuality ◽  
Sense Of Self ◽  
African Literature ◽  
The Other ◽  
Self Determination ◽  
African Women ◽  
The Core ◽  
The Many ◽  
The One ◽  
Sexual Repression

This article examines how female conditioning and sexual repression affect the woman’s sense of self, womanhood, identity and her place in society. It argues that the woman’s body is at the core of the many sites of gender struggles/ politics. Accordingly, the woman’s body must be decolonised for her to attain true emancipation. On the one hand, this study identifies the grave consequences of sexual repression, how it robs women of their freedom to choose whom to love or marry, the freedom to seek legal redress against sexual abuse and terror, and how it hinders their quest for self-determination. On the other hand, it underscores the need to give women sexual freedom that must be respected and enforced by law for the overall good of society.

An Intuitionistic Fuzzy Based Novel Approach to CPU Scheduler

2020 ◽  
Vol 16 (4) ◽  
pp. 316-328
Author(s):  
Supriya Raheja
Keyword(s):  
Fuzzy Inference ◽  
The Other ◽  
Simulation Environment ◽  
Inference System ◽  
Intuitionistic Fuzzy ◽  
Novel Approach ◽  
Continuous Feedback ◽  
Simulation Results ◽  
Effectiveness And Efficiency ◽  
Unique Capability

Background: The extension of CPU schedulers with fuzzy has been ascertained better because of its unique capability of handling imprecise information. Though, other generalized forms of fuzzy can be used which can further extend the performance of the scheduler. Objectives: This paper introduces a novel approach to design an intuitionistic fuzzy inference system for CPU scheduler. Methods: The proposed inference system is implemented with a priority scheduler. The proposed scheduler has the ability to dynamically handle the impreciseness of both priority and estimated execution time. It also makes the system adaptive based on the continuous feedback. The proposed scheduler is also capable enough to schedule the tasks according to dynamically generated priority. To demonstrate the performance of proposed scheduler, a simulation environment has been implemented and the performance of proposed scheduler is compared with the other three baseline schedulers (conventional priority scheduler, fuzzy based priority scheduler and vague based priority scheduler). Results: Proposed scheduler is also compared with the shortest job first CPU scheduler as it is known to be an optimized solution for the schedulers. Conclusion: Simulation results prove the effectiveness and efficiency of intuitionistic fuzzy based priority scheduler. Moreover, it provides optimised results as its results are comparable to the results of shortest job first.

Ahara as Pathya and Apathya in Amlapitta - A Review.

2017 ◽  
Vol 2 (1) ◽  
Author(s):  
Rakshith . ◽  
Shivakumar . ◽  
Sreeharsha . ◽  
Divyasree .
Keyword(s):  
Physical Health ◽  
Review Article ◽  
The Other ◽  
Social Health ◽  
Present Review ◽  
Common Disease ◽  
The Core ◽  
Common Disorder ◽  
The Common

The core principles in Ayurveda give prime importance to Agni, Prakriti, Ahara (food) and Vihara (lifestyle) in maintaining health. Present era people are scheduled to one or the other works due to which they are following unrightful food and habits which lead the manifestation of one of the common disorder which troubles person a lot - Amlapitta. By excess “Hurry, Worry and Curry” GIT disorders are the most common, not only affecting physical health but also psychological and social health. Amlapitta is one of that and it is a burning problem of the whole World. Amalpitta is composed of word Amla and Pitta. Amlapitta is a very common disease caused by Vidagdha Pitta with features like Amlodgara, Tiktodgara, Hrit, Kantha Daha etc. Pathya recommended in Amlapitta are Yava, Godhuma, Purana Shali, Mudga Yusha, Lajasaktu etc. Apathya recommended in Amlapitta are Navanna, Avidugdha, Masha, Kulattha, Dadhi and etc. So this present review article throws light on Pathya (conducive) and Apathya (non conducive) in Amlapitta.

scholarly journals Sustainable Consumer Behavior in Purchasing, Using and Disposing of Clothes

2021 ◽  
Vol 13 (15) ◽  
pp. 8333
Author(s):  
Mirella Soyer ◽  
Koen Dittrich
Keyword(s):  
Consumer Behavior ◽  
The Netherlands ◽  
Multiple Regression ◽  
Significant Role ◽  
Social Motivation ◽  
The Other ◽  
Social Evaluation ◽  
Sustainable Practices ◽  
Usage Phase ◽  
The Core

In this study we investigate how consumers in The Netherlands can be persuaded to adopt sustainable practices when purchasing, using and disposing of clothes. This study investigates the attitude-behavior gap for the sustainable choices for purchase, use and disposing of clothes. For each consumption phase we ran a two-step multiple regression. The findings showed that the importance of the factors vary in the three consumption phases. For purchasing and disposal decisions, the core motivator social motivation predicts sustainable practices best, while it has no role in the usage phase. The factor ability appeared to have a significant role in the disposal phase, but not in the other phases. Finally, the trigger appears to lower the consumers’ ability in the purchasing phase, while it enhances the core motivator social evaluation in the disposal phase.

Sign in / Sign up

Export Citation Format

Share Document