FARADAY AND COTTON–MOUTON ROTATIONS IN RELATIVISTIC MEDIUM

2010 ◽  
Vol 19 (08n10) ◽  
pp. 1599-1608 ◽  
Author(s):  
H. P. ROJAS ◽  
E. R. QUERTS
Keyword(s):  
Magnetic Field ◽  
Light Propagation ◽  
Experimental Studies ◽  
Polarization Vector ◽  
Low Energy ◽  
Low Density ◽  
Transparent Medium ◽  
Energy Eigenvalues ◽  
Electron Positron ◽  
Space Symmetry

The rotation of the polarization vector for light propagating in an external constant magnetic field B in relativistic media is discussed in the two main cases: Faraday and Cotton–Mouton effects. Faraday rotation is circular and arises whenever the medium is not invariant under charge conjugation, whereas Cotton–Mouton rotation arises due to the breaking of the space symmetry in any transparent medium, and describes a sort of ellipse whose axes vary periodically in time from zero to two maximum values. The discussion starts from the expressions for the photon energy eigenvalues in vacuum as well as in a relativistic electron–positron gas, which remain valid in the low energy, low density limits. Values for the rotation frequencies are estimated in some specific cases. Our studies might be of interest both in experimental studies about light propagation in ultrahigh vacuum, as well as in astrophysics.

scholarly journals Analysis of the Effect of a Magnetic Field on Spent Petroleum Oils for Their Regeneration

2021 ◽  
Vol 136 (5) ◽  
pp. 23-26
Author(s):  
G. V. Vlasova ◽  
◽  
T. S. Vybornova ◽  
E. R. Telichkina ◽  
◽  
...  
Keyword(s):  
Magnetic Field ◽  
Physicochemical Properties ◽  
Experimental Studies ◽  
Magnetic Treatment ◽  
Low Energy ◽  
Oil Products ◽  
Waste Oil ◽  
Waste Oils ◽  
Wave Effects ◽  
Physical Fields

The article discusses the effect of magnetic treatment of used oils of various compositions on their physicochemical properties for the purpose of further regeneration. The problem of utilization and regeneration of waste oil products and the ways of its solution are highlighted. The objects of research and methods that will be used for research are presented. An algorithm for studying the improvement of the physicochemical properties of waste oils by means of low-energy wave effects is described. The results of experimental studies and a possible mechanism of the ongoing processes are presented. It is shown that the effect of physical fields on waste oils leads to a change in the nature of the interaction of the components of the oil system and, as a consequence, to a change in operational properties.

Transfer optics for high spatial resolution electron spectroscopy

1988 ◽  
Vol 46 ◽  
pp. 666-667
Author(s):  
G. G. Hembree ◽  
Luo Chuan Hong ◽  
P.A. Bennett ◽  
J.A. Venables
Keyword(s):  
Magnetic Field ◽  
Scanning Transmission Electron Microscope ◽  
Low Energy ◽  
Objective Lens ◽  
State University ◽  
Arizona State University ◽  
Initial Field ◽  
Resolution Electron ◽  
Scanning Transmission ◽  
Low Energy Electrons

A new field emission scanning transmission electron microscope has been constructed for the NSF HREM facility at Arizona State University. The microscope is to be used for studies of surfaces, and incorporates several surface-related features, including provision for analysis of secondary and Auger electrons; these electrons are collected through the objective lens from either side of the sample, using the parallelizing action of the magnetic field. This collimates all the low energy electrons, which spiral in the high magnetic field. Given an initial field Bi∼1T, and a final (parallelizing) field Bf∼0.01T, all electrons emerge into a cone of semi-angle θf≤6°. The main practical problem in the way of using this well collimated beam of low energy (0-2keV) electrons is that it is travelling along the path of the (100keV) probing electron beam. To collect and analyze them, they must be deflected off the beam path with minimal effect on the probe position.

Assessment of the volume activity of α-radioactive wastes on surface and specific contamination by portable γ-spectrometry method

2020 ◽  
pp. 468-473
Author(s):  
I. P. Korenkov ◽  
A. I. Ermakov ◽  
A. B. Mayzik ◽  
T. N. Laschenova ◽  
V. N. Klochkov ◽  
...  
Keyword(s):  
Specific Activity ◽  
Experimental Studies ◽  
Germanium Detector ◽  
Low Energy ◽  
Gamma Ray Spectrometry ◽  
Building Structures ◽  
Germanium Detectors ◽  
Volume Activity ◽  
Β Decay ◽  
Γ Spectrometry

The aim of the study is to evaluate the volume activity of radioactive waste (RW) by surface and specific alpha contamination using portable gamma-spectrometry.Materials and methods. Methods of rapid assessment of the content of α-emitting radionuclides in solid waste of various morphologies using gamma-spectrometers based on germanium detectors are considered. Computational methods for determining the effectiveness of radionuclide registration are presented.Results. The possibility of using portable gamma-ray spectrometry to assess the surface and specific activity of various materials contaminated with α-emitters (232Th, 235U, 238U, 237Np, 239Pu, 240Pu and 241Am) is shown. The calculated values of the registration efficiency of low-energy gamma-emitters obtained by modeling the spatial-energy parameters of the detector are given.To simplify the solution of this problem, the calculation program used 20 standard templates of various geometries (rectangular, cylindrical, conical, spherical, etc.). The main sources of error in the survey of contaminated surfaces, largesized equipment and building structures were investigated.Conclusions. The possibilities of portable γ-spectrometry for estimating the volume of RW based on the surface density of contamination of materials with radionuclides of uranium and transuranic elements are investigated. When using γ-spectrometer with a high-purity germanium detector with a range of γ-quanta extended in the low-energy region, radionuclides such as 232Th, 235U,238U, 237Np, 241Am were determined by their own radiation or by the radiation of their daughter products.The “problem” element is plutonium, for rapid evaluation of which it is proposed, in accordance with the radionuclide vector methodology, to use 241Am, which accumulates during the β-decay of 241Pu.According to calculations, the most likely value of the activity ratio 239Pu/241Am for the object where the work was performed (scaling factor) varies in the range from 5.0 to 9.0.Based on the results of calculations and experimental studies, the parameters of the efficiency of registration of various α-emitting radionuclides by portable γ-spectrometers. It has been found that for germanium detectors with an absolute efficiency of registering a point source of 7÷15%, it is n×10–5÷n×10–4%.

STABLE hc/e VORTICES IN SUPERCONDUCTORS WITH SPIN-CHARGE SEPARATION

1992 ◽  
Vol 06 (05n06) ◽  
pp. 509-526
Author(s):  
Subir Sachdev
Keyword(s):  
Magnetic Field ◽  
Magnetic Flux ◽  
Normal State ◽  
Phenomenological Model ◽  
Charge Separation ◽  
Cuprate Superconductors ◽  
Superconducting Phase ◽  
Low Energy ◽  
Large N ◽  
Normal State Properties

A phenomenological model, F, of the superconducting phase of systems with spin-charge separation and antiferromagnetically induced pairing is studied. Above Hc1, magnetic flux can always pierce the superconductor in vortices with flux hc/2e, but regimes are found in which vortices with flux hc/e are preferred. Little-Park and other experiments, which examine periodicities with a varying magnetic field, always observe a period of hc/2e. The low energy properties of a symplectic large-N expansion of a model of the cuprate superconductors are argued to be well described by F. This analysis and some normal state properties of the cuprates suggest that hc/e vortices should be stable at the lowest dopings away from the insulating state at which superconductivity first occurs.

scholarly journals Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

2021 ◽  
Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Ebrahim Karimi-Sibaki ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Lorentz Force ◽  
Applied Magnetic Field ◽  
Numerical Study ◽  
Flow Direction ◽  
Experimental Studies ◽  
Submerged Entry Nozzle ◽  
Mean Flow ◽  
Slab Caster ◽  
The Mean

AbstractA numerical study is presented that deals with the flow in the mold of a continuous slab caster under the influence of a DC magnetic field (electromagnetic brakes (EMBrs)). The arrangement and geometry investigated here is based on a series of previous experimental studies carried out at the mini-LIMMCAST facility at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The magnetic field models a ruler-type EMBr and is installed in the region of the ports of the submerged entry nozzle (SEN). The current article considers magnet field strengths up to 441 mT, corresponding to a Hartmann number of about 600, and takes the electrical conductivity of the solidified shell into account. The numerical model of the turbulent flow under the applied magnetic field is implemented using the open-source CFD package OpenFOAM®. Our numerical results reveal that a growing magnitude of the applied magnetic field may cause a reversal of the flow direction at the meniscus surface, which is related the formation of a “multiroll” flow pattern in the mold. This phenomenon can be explained as a classical magnetohydrodynamics (MHD) effect: (1) the closure of the induced electric current results not primarily in a braking Lorentz force inside the jet but in an acceleration in regions of previously weak velocities, which initiates the formation of an opposite vortex (OV) close to the mean jet; (2) this vortex develops in size at the expense of the main vortex until it reaches the meniscus surface, where it becomes clearly visible. We also show that an acceleration of the meniscus flow must be expected when the applied magnetic field is smaller than a critical value. This acceleration is due to the transfer of kinetic energy from smaller turbulent structures into the mean flow. A further increase in the EMBr intensity leads to the expected damping of the mean flow and, consequently, to a reduction in the size of the upper roll. These investigations show that the Lorentz force cannot be reduced to a simple damping effect; depending on the field strength, its action is found to be topologically complex.

scholarly journals Magnetoactive elastomers for magnetically tunable vibrating sensor systems

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Tatiana I. Becker ◽  
Yuriy L. Raikher ◽  
Oleg V. Stolbov ◽  
Valter Böhm ◽  
Klaus Zimmermann
Keyword(s):  
Magnetic Field ◽  
Steady State ◽  
Smart Materials ◽  
Excitation Frequency ◽  
Experimental Studies ◽  
Uniform Field ◽  
Sensor Systems ◽  
Ongoing Research ◽  
Amplification Ratio ◽  
Field Distortion

Abstract Magnetoactive elastomers (MAEs) are a special type of smart materials consisting of an elastic matrix with embedded microsized particles that are made of ferromagnetic materials with high or low coercivity. Due to their composition, such elastomers possess unique magnetic field-dependent material properties. The present paper compiles the results of investigations on MAEs towards an approach of their potential application as vibrating sensor elements with adaptable sensitivity. Starting with the model-based and experimental studies of the free vibrational behavior displayed by cantilevers made of MAEs, it is shown that the first bending eigenfrequency of the cantilevers depends strongly on the strength of an applied uniform magnetic field. The investigations of the forced vibration response of MAE beams subjected to in-plane kinematic excitation confirm the possibility of active magnetic control of the amplitude-frequency characteristics. With change of the uniform field strength, the MAE beam reveals different steady-state responses for the same excitation, and the resonance may occur at various ranges of the excitation frequency. Nonlinear dependencies of the amplification ratio on the excitation frequency are obtained for different magnitudes of the applied field. Furthermore, it is shown that the steady-state vibrations of MAE beams can be detected based on the magnetic field distortion. The field difference, which is measured simultaneously on the sides of a vibrating MAE beam, provides a signal with the same frequency as the excitation and an amplitude proportional to the amplitude of resulting vibrations. The presented prototype of the MAE-based vibrating unit with the field-controlled “configuration” can be implemented for realization of acceleration sensor systems with adaptable sensitivity. The ongoing research on MAEs is oriented to the use of other geometrical forms along with beams, e.g. two-dimensional structures such as membranes.

scholarly journals THE ENERGY EIGENVALUES OF THE TWO DIMENSIONAL HYDROGEN ATOM IN A MAGNETIC FIELD

2006 ◽  
Vol 15 (06) ◽  
pp. 1263-1271 ◽  
Author(s):  
A. SOYLU ◽  
O. BAYRAK ◽  
I. BOZTOSUN
Keyword(s):  
Magnetic Field ◽  
Hydrogen Atom ◽  
Iteration Method ◽  
Weak Magnetic Field ◽  
The Other ◽  
Asymptotic Iteration Method ◽  
Iterative Approach ◽  
Two Dimensional ◽  
Energy Eigenvalues ◽  
The Magnetic Field

In this paper, the energy eigenvalues of the two dimensional hydrogen atom are presented for the arbitrary Larmor frequencies by using the asymptotic iteration method. We first show the energy eigenvalues for the case with no magnetic field analytically, and then we obtain the energy eigenvalues for the strong and weak magnetic field cases within an iterative approach for n=2-10 and m=0-1 states for several different arbitrary Larmor frequencies. The effect of the magnetic field on the energy eigenvalues is determined precisely. The results are in excellent agreement with the findings of the other methods and our method works for the cases where the others fail.

scholarly journals Enhanced antibacterial activity through the controlled alignment of graphene oxide nanosheets

2017 ◽  
Vol 114 (46) ◽  
pp. E9793-E9801 ◽  
Author(s):  
Xinglin Lu ◽  
Xunda Feng ◽  
Jay R. Werber ◽  
Chiheng Chu ◽  
Ines Zucker ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Antibacterial Activity ◽  
Graphene Oxide ◽  
Direct Electron Transfer ◽  
Composite Films ◽  
Experimental Studies ◽  
Cross Linking ◽  
Vertical Orientation ◽  
Electron Transfer Mechanism ◽  
Vertically Aligned

The cytotoxicity of 2D graphene-based nanomaterials (GBNs) is highly important for engineered applications and environmental health. However, the isotropic orientation of GBNs, most notably graphene oxide (GO), in previous experimental studies obscured the interpretation of cytotoxic contributions of nanosheet edges. Here, we investigate the orientation-dependent interaction of GBNs with bacteria using GO composite films. To produce the films, GO nanosheets are aligned in a magnetic field, immobilized by cross-linking of the surrounding matrix, and exposed on the surface through oxidative etching. Characterization by small-angle X-ray scattering and atomic force microscopy confirms that GO nanosheets align progressively well with increasing magnetic field strength and that the alignment is effectively preserved by cross-linking. When contacted with the model bacteriumEscherichia coli, GO nanosheets with vertical orientation exhibit enhanced antibacterial activity compared with random and horizontal orientations. Further characterization is performed to explain the enhanced antibacterial activity of the film with vertically aligned GO. Using phospholipid vesicles as a model system, we observe that GO nanosheets induce physical disruption of the lipid bilayer. Additionally, we find substantial GO-induced oxidation of glutathione, a model intracellular antioxidant, paired with limited generation of reactive oxygen species, suggesting that oxidation occurs through a direct electron-transfer mechanism. These physical and chemical mechanisms both require nanosheet penetration of the cell membrane, suggesting that the enhanced antibacterial activity of the film with vertically aligned GO stems from an increased density of edges with a preferential orientation for membrane disruption. The importance of nanosheet penetration for cytotoxicity has direct implications for the design of engineering surfaces using GBNs.

Sign in / Sign up

Export Citation Format

Share Document